General Sales Information

Please read the Sales Information to get informed about the Sales Process and Structure

Information | Line for the Machining of Crankshafts up to 800mm

including two Machines for Milling and Drilling of Crankshafts up to 2.500mm Length

all Machines are from Year 2005–2015, some retrofitted in 2019, CNC SIEMENS SINUMERIK 840D

Laser-Marking Station Baublis / Trumpf ID 25 I/NC 10 X 80 | 2012

Binding Handling & Loading Fee:
1750 € (EURO)

CNC Crankshaft Cut-to-Length, Facing and Centering Machine LiCon LIFLEX 446-6/60 | 2005

Binding Handling & Loading Fee:
8900 € (EURO)


Machining Center for cut-to-length, facing and centering of crankshafts, max length 1.000mm, CNC Siemens Sinumerik 840 D Parts Gantry System and/or Cranes are not included in the Scope.

CNC Lathe Niles Simmons N30-1.500 | 2004

Binding Handling & Loading Fee:
9500 € (EURO)


used for Turning of Flange and Pin Nominal length 1.500mm, max clamping length 800mm, tailstock, 2x 12-Pos-tool-turret, CNC Siemens Sinumerik 840D, 400V 50Hz 138kVA, weight, ca. 18to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Twin-Head Crankshaft Milling Centre Niles Simmons N30 CM-1.500 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


Machine was used for the operation "pre-milling" Nominal Length 1.500mm, max clamping length 800mm, max swing 780mm, spindle dia 170mm, cutter dia 700/800mm, rapid travel long./cross 30/18m, min/max capacity 37,5/47kW, CNC Siemens Sinumerik 840D, 400V 50Hz 126kVA Parts Gantry System and/or Cranes are not included in the Scope.

CNC Twin-Head Crankshaft Milling Centre Niles Simmons N30 CM-1.500 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


Machine was used for the operation "pre-milling" Nominal length 1.500mm, max clamping length 800mm, max swing 780mm, spindle dia 170mm, cutter dia 700/800mm, rapid travel long./cross 30/18m, min/max capacity 37,5/47kW, CNC Siemens Sinumerik 840D, 400V 50Hz 126kVA Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Turn-Broaching Machine Niles Simmons N30 TB-1.500 | 2004

Binding Handling & Loading Fee:
9500 € (EURO)


Machine was used for the operation "Turn Broaching of Main Bearing" nominal length 1.500mm, max clamping length 800mm, swing 780mm, spindle power 2 x 64/78kW (3.000rpm), rapid travel long./cross 30/18m/min, cutter dia 700mm, CNC Siemens Sinumerik 840D, 400V 50Hz 138kVA, weight, ca. 18to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Turn-Broaching Machine Niles Simmons N30 TB-1.500 | 2011

Binding Handling & Loading Fee:
9500 € (EURO)


Machine was used for the operation "Turn Broaching of Main Bearing" nominal length 1.500mm, max clamping length 800mm, swing 780mm, spindle power 2 x 64/78kW (3.000rpm), rapid travel long./cross 30/18m/min, cutter dia 700mm, CNC Siemens Sinumerik 840D, 400V 50Hz 138kVA, weight, ca. 24to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Twin-Head Crankshaft Milling Centre Niles Simmons N30 CM-1.500 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


Machine was used for the operation "finish turn the broaching pins" nominal length 1.500mm, max clamping length 800mm, max swing 780mm, spindle dia 170mm, cutter dia 700/800mm, rapid travel long./cross 30/18m, minmax capacity 37,5/47kW, CNC Siemens Sinumerik 840D, 400V 50Hz 126kVA, weight, ca. 22to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Control-Balancing Machine Hofmann UHK 12 - ZM1 | 2015

Binding Handling & Loading Fee:
750 € (EURO)


max crankshaft length 800mm, max dia 300/200mm, max weight 50kg, bearing dia 30 - 80mm, balancing speed 200-650 rpm, 230V 50Hz, LxWxH,:1,3x1x1,5m Parts Gantry System and/or Cranes are not included in the Scope.

CNC 3-Spindle Crankshaft Deep Drilling Machine TBT BW 250-3 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


used for Drilling of Oil Channels 3-spindle deep drilling machine for crankshafts, spindle distance 250mm, drilling depth ca. 1.000mm, CNC Siemens Sinumerik 840 D, weight, ca. 22to

Deburring Station with Robot Handling Reis / KUKA VKR C2, VKR 140 SC 2 ZH 03 | 2005

Binding Handling & Loading Fee:
3150 € (EURO)


robot operated crankshaft handling for flexible deburring by brushing Parts Gantry System and/or Cranes are not included in the Scope.

Deburring Station with Robot Handling Reis / KUKA H-05 261 / VKR C2, VKR 125/3 TJGC 2 ZH05 | 2004

Binding Handling & Loading Fee:
3150 € (EURO)


robot operated crankshaft handling for flexible deburring by brushing Parts Gantry System and/or Cranes are not included in the Scope.

Industrial Parts Washing Machine Dürr 42 HCS | 2005

Binding Handling & Loading Fee:
2400 € (EURO)

Induction-Hardening System SMS- Elotherm EM 16 PI/190/750/30 AKWH-F | 2004/2019

Binding Handling & Loading Fee:
12000 € (EURO)


power supply: 400V 50Hz 918kVA / 1.326A, transformer 200kVA / 264A, converter 204kW / 165kV / 750V / 244A / 10 - 50kHz, flexible induction hardening unit for crankshafts, CNC Siemens Sinumerik 840D,

Parts Washing Station Weller Zwischenreinigungsmodul KW | 2015

Binding Handling & Loading Fee:
950 € (EURO)

Stress-Releasing Oven Nolzen PHUT 125/393/274 | 2005

Binding Handling & Loading Fee:
8500 € (EURO)

CNC Crankshaft Multi-Slide Machining Center Niles Simmons N30 MCM-2500 | 2005

Binding Handling & Loading Fee:
12850 € (EURO)


Nominal crankshaft length 2.500mm, X-Axes 740mm, Y-Axes 465mm, swing dia 780mm, CNC Siemens Sinumerik 840D /// The NILES-SIMMONS N 30 MCM 2.500 Multi-Slide Machining Centers is desi­gned for com­plete machi­ning of cranks­hafts up to 2.500mm length. Appli­ca­ti­ons range from pro­to­ty­p­ing of small pas­sen­ger vehicle cranks­hafts over the com­plete machi­ning of cranks­hafts for light air­craft to one-offs and small-batch manu­fac­ture of large cranks­hafts for sta­tio­nary or marine die­sel engi­nes. The com­bi­na­tion of the uni­ver­sal tur­ning, dril­ling and mil­ling head with powerful exter­nal mil­ling units com­bi­nes fle­xi­bi­lity of tur­ning, dril­ling and mil­ling ope­ra­ti­ons con­fi­gu­red for cranks­haft machi­ning with high stock rem­oval capa­bi­li­ties for machi­ning cranks­haft bea­rings and coun­ter­weights by using large side mil­ling cut­ters. Gun dril­ling, gear hob­bing or hard tur­ning and hard mill/turning pro­ces­ses com­plete the variety of appli­ca­ti­ons up to semi-finis­hing of har­dened crankshafts. LxWxH, ca. 84x3m, weight, ca. 35to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Universal Deep Rolling and Roll Straightening Machine Hegenscheidt 7893 R-01 | 2008

Binding Handling & Loading Fee:
9500 € (EURO)


max bearing center distance 920mm, deep roling / straightening speed 120 / 160 rpm, roller arm length 195-270mm, max 8 main + 6 stroke bearings, dia main / pivot bearings 30-88mm / 30-84mm, min bearing widt 18,5mm, max stroke 140mm, min bearing distance 29,5mm, machining height 1.100mm, main drive 20kW, 400V 50Hz, CNC Siemens Sinumerik 840D, LxWxH 4,5x2,5x2,2m, weight 14to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Universal Crankshaft Fine Turning and Roller Burnishing Machine Hegenscheidt 7794 | 2005

Binding Handling & Loading Fee:
5550 € (EURO)


used for for machining end faces of crankshaft thrust bearings min/max length 260-700mm, max swing 220mm, min/max width of bearing 18-70mm, max bearing level 12,5mm, cutting speed turning 170m/min, rolling speed 45m/min, machining height 1.250mm, 12kVA 400V 50Hz, CNC Siemens Sinumerik 840D, LxWxH 4x3x2,5m, weight 5,5to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Universal Crankshaft Main and Pin Bearing Grinding Machine Junker JUCRANK 5000/50 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


MACHINE IS INCOMPLETE AND NEEDS REPAIR!!! - wheel head with two grinding spindles and B-Axis, max length 700mm, center height 170mm, max crankshaft weight 130kg, grinding wheel dia 500mm, swing dia 280mm, CNC Siemens Sinumerik 840D, 400V 50Hz, LxWxH 5x3,4,2,35m, weight 14to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Gear Shaping Machine Pfauter GP 130 S | 2005/2019

Binding Handling & Loading Fee:
9500 € (EURO)


max dia 130mm, max face width 25mm, min/max module 0,5-4, strokes 500 - 2.500 1/min, spindle dia 85mm, CNC Siemens Sinumerik 840D, 400V 50Hz 49kW, LxWxH 6,4x4,5x4,4m, weight 12to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Multi-Slide Machining Center Niles Simmons N30 MCM-2500 | 2005

Binding Handling & Loading Fee:
12850 € (EURO)


Nominal crankshaft length 2.500mm, X-Axes 740mm, Y-Axes 465mm, swing dia 780mm, CNC Siemens Sinumerik 840D /// The NILES-SIMMONS N 30 MCM 2.500 Multi-Slide Machining Centers is desi­gned for com­plete machi­ning of cranks­hafts up to 2.500mm length. Appli­ca­ti­ons range from pro­to­ty­p­ing of small pas­sen­ger vehicle cranks­hafts over the com­plete machi­ning of cranks­hafts for light air­craft to one-offs and small-batch manu­fac­ture of large cranks­hafts for sta­tio­nary or marine die­sel engi­nes. The com­bi­na­tion of the uni­ver­sal tur­ning, dril­ling and mil­ling head with powerful exter­nal mil­ling units com­bi­nes fle­xi­bi­lity of tur­ning, dril­ling and mil­ling ope­ra­ti­ons con­fi­gu­red for cranks­haft machi­ning with high stock rem­oval capa­bi­li­ties for machi­ning cranks­haft bea­rings and coun­ter­weights by using large side mil­ling cut­ters. Gun dril­ling, gear hob­bing or hard tur­ning and hard mill/turning pro­ces­ses com­plete the variety of appli­ca­ti­ons up to semi-finis­hing of har­dened crankshafts. LxWxH, ca. 84x3m, weight, ca. 35to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Grinding Machine Junker JUCRANK 6000/50/50 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


incomplete machine, not operational, needs significant repair Parts Gantry System and/or Cranes are not included in the Scope.

CNC Universal Crankshaft Main and Pin Bearing Grinding Machine Junker JUCRANK 6000 50/50 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


two wheel heads with two grinding spindles and B-Axis, max clamping length 1.200mm, max grinding length 750mm, center height 170mm, max crankshaft weight 150kg, grinding wheel dia 500/700mm, swing dia 280/320mm, CNC Siemens Sinumerik 840D, 400V 50Hz, LxWxH 5x3,75x2,45m, weight 25to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Universal Crankshaft Main and Pin Bearing Grinding Machine Junker JUCRANK 6S 50-50 | 2011

Binding Handling & Loading Fee:
9500 € (EURO)


two wheel heads with two grinding spindles and B-Axis, max clamping length 1.200mm, max grinding length 750mm, center height 170mm, max crankshaft weight 150kg, grinding wheel dia 500/700mm, swing dia 280/320mm, CNC Siemens Sinumerik 840D, 400V 50Hz, LxWxH 5x3,75x2,45m, weight 25to Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Cut-to-Length, Facing and Centering Machine LiCon LIFLEX 446-6/60 | 2005

Binding Handling & Loading Fee:
8900 € (EURO)


Machining Center for cut-to-length, facing and centering of crankshafts, max length 1.000mm, CNC Siemens Sinumerik 840 D Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft Cut-to-Length, Facing and Centering Machine LiCon LIFLEX 446-6/60 | 2005

Binding Handling & Loading Fee:
8900 € (EURO)


Machining Center for cut-to-length, facing and centering of crankshafts, max length 1.000mm, CNC Siemens Sinumerik 840 D Parts Gantry System and/or Cranes are not included in the Scope.

CNC Crankshaft External Cylindrical and Plung-Cut Grinding Machine Junker JUMAT 5000/60 | 2005

Binding Handling & Loading Fee:
9500 € (EURO)


wheel head with three grinding spindles and B-Axis, max length 700mm, center height 170mm, max crankshaft weight 130kg, grinding wheel dia 500mm, swing dia 280mm, CNC Siemens Sinumerik 840D, interpolation of B-Axes (swivelling wheel head) with X and Z Axes is possible, 400V 50Hz, LxWxH 5x3,4,2,35m, weight 14to Parts Gantry System and/or Cranes are not included in the Scope.