Auctions & Liquidations
Private Treaty Sale | Trion Battery | Battery Cell Productionlines
Listing 1.0:Battery Cell Produktion - from B-Z
Tax Rate on Hammer Price: 19%
Tax Rate on Charges: 19%
Description
Lot 1.0 – Battery Cell Production, from B to Z
Tender Sale on behalf of Trion Battery GmbH
The Opportunity
Offered for sale by tender is a complete lithium-ion battery cell production — everything from B to Z. Step A, the manufacture of the coated anode and cathode foil, is not part of this sale; the production starts where the coated electrode and ceramic separator reels arrive, and it ends with the finished, formed, aged, tested and graded cell ready for dispatch.
What is offered is a process-matched production system, not a collection of individual machines: a fully automated cell assembly line by Grohmann Engineering, press rolling, internal tray logistics, formation, automated aging storage, fully automated end-of-line testing with grading and sorting, coordinate measuring equipment for the quality laboratory, and an extensive spare parts package. The plant was operated at series production level for automotive-grade prismatic pouch cells.
The individual lots are described in detail under Lots 1.1 to 1.8. Offers are invited for individual lots and for the production as a whole; an offer for the complete production will be given preference.
Lot Structure
| Lot 1.1 | Automatic Battery Cell Assembly Line (Grohmann Engineering) – inline drying, laser cutting, single sheet stacking, stack fixation, ultrasonic tab welding, housing deep drawing and sealing, electrolyte filling and wetting, final sealing and cutting |
| Lot 1.2 | Coordinate Measuring Machines (Carl Zeiss IMT, O-INSPECT 442) – scanning multisensor CMM for the quality laboratory |
| Lot 1.3 | Battery Cell End-of-Line Test, Grading & Sorting Lines (branscheid) – fully automatic electrical, geometric and gravimetric cell testing with automatic grading and sorting |
| Lot 1.4 | Press Rolling (KAL Walzen), 2013 – robot-fed rolling cells for press rolling of the filled cell |
| Lot 1.5 | Roller Conveyor Line – internal transport of cell trays between the process steps |
| Lot 1.6 | Battery Cell Formation Plant – formation towers with cell trays, stacker crane and Digatron charge/discharge technology |
| Lot 1.7 | Automated Tray Storage System (Aging) (Hörmann Logistik) – automated high-bay tray storage in an insulated enclosure for the aging step |
| Lot 1.8 | Extensive Spare Parts Package – the complete spare parts inventory for the production lines, from seals to complete fibre laser sources |
The Production Process
The plant was built around a highly integrated process. The steps below follow the production flow and name the lot in which each step is offered:
Cell Assembly – Lot 1.1
- Drying – non-vacuum inline drying of electrodes and ceramic separator plus inline annealing of the electrodes, integrated into the assembly line; drying time under 10 minutes at a dew point of −55 °C, with two types of radiant heating
- Laser Cutting – full laser cutting of electrodes and ceramic separator with IPG fibre lasers, 2 × 200 W for the electrodes, cutting speed 1 m/s; no tool wear, no fringes, and fast adaptation to new cell geometries
- Stacking – single sheet stacking of electrodes and separator in one step to a tolerance of 0.3 mm, with no bending of the active material
- Fixation – fully automated seven-point PP tape fixation of the stack, minimising local mechanical stress
- Tab Welding – torsional ultrasonic welding without pre-welding or additional retaining plates, four welding spots per tab, overall retention force over 1,000 N; sonotrode and anvil geometries matched to the respective material
- Packing/Sealing – inline deep drawing of load-optimised housing half shells, precisely aligned to each other, with hot-cold sealing for maximum longevity and cohesion
- Filling/Wetting – electrolyte filling by high-precision HIBAR pump with gravimetric level measurement to ±2 g specified (±0.5 g achieved in production), followed by multi-cycle wetting supported by the ceramic separator, and vacuum sealing
- Final Sealing/Cutting – hot-cold final sealing and a highly precise final cut meeting the narrow dimensional tolerance of the cell
Press Rolling – Lot 1.4
- press rolling of the filled cell under defined pressure for optimised spread and absorption of the electrolyte
- avoidance of electrochemically inactive areas, higher cell performance and a reduced reject rate in formation
- executed in robot-fed rolling cells with roller stations and handling stations
Internal Transport – Lot 1.5
- roller conveyor line linking the process steps, carrying the cell trays through the production
Formation – Lot 1.6
- initial charge of the cell in multi-level formation towers with cell trays, served by a rail-guided stacker crane
- contact units in a copper/beryllium design developed specifically for this plant together with the supplier
- proprietary formation process in under 15 hours, without degassing
- precise temperature control throughout the entire process (±2 K), complying with high safety standards
- Digatron charge/discharge technology
Aging – Lot 1.7
- two-week aging at room temperature in a fully automated high-bay tray storage system
- inerted aging area in an insulated panel enclosure, complying with German fire safety regulations, at a remaining oxygen concentration of 12 %
- automated storage and retrieval machine with lifting mast, running in a single aisle between two blocks of tray racks
- significant capacity reserves; the step closes with the final measurement of the self-discharge rate
End of Line Testing – Lot 1.3
- fully automated testing benches for electrical and geometrical cell measurement
- measurement of all relevant electrical parameters: self-discharge rate, open-circuit voltage, internal resistance and current pulse check
- geometric and gravimetric measurement of the cell, thickness measurement and internal pressure measurement
- tab cutting, manual optical release inspection and cell marking
- automatic grading of each cell into three quality classes and automatic sorting
Quality Laboratory – Lot 1.2
- scanning multisensor coordinate measuring machines (Carl Zeiss IMT O-INSPECT 442) with optical, tactile and laser sensors for dimensional inspection of cells and components
Spare Parts – Lot 1.8
- the complete grown spare parts inventory of the production, covering maintenance consumables through to high-value strategic spares including complete fibre laser sources and laser scan heads
- recorded item by item with part number, designation, manufacturer, storage location and quantity; the full list is available for download
Technical Highlights
- very compact assembly line design at approximately 30 m line length
- competitive cycle time at series production level
- inline drying concept without vacuum, integrated into the assembly line
- full laser cutting capability instead of mechanical tooling — no tool wear and free choice of cell geometry
- single sheet stacking to 0.3 mm with no bending of the active material
- torsional ultrasonic tab welding with over 1,000 N retention force
- formation without degassing, in under 15 hours
- fully automated aging storage with capacity reserves
- 100 % end-of-line testing with automatic grading into three classes
The Product
The plant produced two prismatic pouch cell formats in series:
52 Ah cell (HEA-50, ICS 13/330/162)
- capacity 52 Ah nominal, 50 Ah minimal (0.5 C discharged, 23 °C)
- voltage 4.2 V charging, 3.0 V minimal
- AC impedance (1 kHz) < 0.5 mΩ
- gravimetric energy density 147 Wh/kg, volumetric energy density 280 Wh/l
- max. charging power at 25 °C: 2 C (100 A) constant, 4 C (200 A) pulse 30 s
- 330 × 186 × 12.7 mm, 1,290 g
40 Ah cell (HEA-40, ICS 12/203/245)
- capacity 40 Ah nominal, 39 Ah minimal (0.5 C discharged, 23 °C)
- voltage 4.2 V charging, 3.0 V minimal
- AC impedance (1 kHz) ≤ 0.7 mΩ
- gravimetric energy density 138 Wh/kg, volumetric energy density 260 Wh/l
- max. charging power at 25 °C: 2 C (80 A) constant, 4 C (160 A) pulse 30 s
- 245 × 203 × 11.3 mm, 1,040 g
Cells from this production were used in automotive motorsport applications, in electric material handling equipment and in stationary energy storage systems.
Further Equipment
In addition to the lots listed above, various semi-automated assembly and laboratory installations are available, offering flexibility for other cell formats and for development and small-series production. These are offered in separate lots.
Inspection and Offer Process
The production can be inspected in its installed condition by appointment. Technical documentation, detailed asset lists, the spare parts list and photographic material are available to interested parties on request.
Offers are to be submitted in writing by the closing date of the tender, stating the lot or lots concerned, the offer price net EXW (Incoterms 2020), and the intended removal period. Offers for the production as a whole, or for complete process steps, will be given preference over offers for individual assets.
IMPORTANT – SALE SUBJECT TO SELLER APPROVAL: This tender is conducted subject to the express approval of the seller, Trion Battery GmbH. Submission of an offer, including the highest offer, does not create any entitlement to purchase or to be awarded a lot. The seller reserves the right to accept or reject any offer, to award lots individually or in combination, and to withdraw assets from the sale.
Delivery conditions: EXW (Incoterms 2020). Dismantling, removal and transport are the responsibility of the buyer. All assets are sold as they stand; no warranty is given as to completeness, function or fitness for a particular purpose. Inspection before submitting an offer is strongly recommended.
DO YOU HAVE ANY QUESTIONS? PLEASE CONTACT ME!
Sebastian Geissler
Senior Project Manager
Tel: +49 176 10 43 16 23
E: sebastiang@maynards.com
This website's original content is provided in English. Translations into other languages are AI-generated and offered solely for user convenience; they may contain errors or inaccuracies. In case of any inconsistency, the English version prevails. No liability is assumed for misunderstandings or damages arising from translated content. Users should refer to the English version for authoritative information.
Auction Software by Bidlogix