Auctions & Liquidations
Online Auction | Schaeffler | Machinery and Workshop
Starts: Tue, Sep 9, 2025, 9:00 AM UTC
Ends: Tue, Sep 23, 2025, 9:00 AM UTC
Maynards, in conjunction with AllSurplus and in order of Schaeffler Technologies, is offering well maintained and properly dismantled and stored Machinery and Equipment for Sale by Online Auction.
Showing 30 lots
Lot 2740001
Hardening Furnace Mahier DLMEH 300/50/2750 | 1992
Binding Handling & Loading Fee:
495 € (EURO)
Sale has ended
Lot 2740002
Honing Machine INA Schaeffler IBA 82412 | 1999
Binding Handling & Loading Fee:
125 € (EURO)
was used for the Processing of Outer Rings
Sale has ended
Lot 2740003
Vacuum Filter System Mannesmann Demag Sack SUF 05K | 1985
Binding Handling & Loading Fee:
75 € (EURO)
Sale has ended
Lot 2740004
Decoiler Brechner Apparatebau BRH 5-D | 1985
Binding Handling & Loading Fee:
75 € (EURO)
• Order Number: 419-4100 • Job Number: 2212 • Wiring Diagram No.: 50025.1 • Weight: 1,200 kg • Power Connection: 220 / 380 V, 50 Hz • Operating Current: 2 A • Air Pressure: - • Air Consumption: - • Equipment No.: 10027925 (Schaeffler internal reference) • Inventory No.: 590764 • Description: Coil unwinding reel
Sale has ended
Lot 2740005
Cage Grinding Machine GREIF | 1995
Binding Handling & Loading Fee:
75 € (EURO)
Sale has ended
Lot 2740006
Orbital Riveting Machine INA Werk Schaeffler KG | 2004
Binding Handling & Loading Fee:
35 € (EURO)
• Manufacturer: INA Werk Schaeffler KG • Location: D-91072 Herzogenaurach • Year of Manufacture: 2004 • Wiring Diagram No.: D-5072-01 • Operating Current: 2 A • Operating Pressure: 6 bar • Power Connection: Not specified • Weight: Not specified • Order No. / Job No.: Not specified • Compressed Air Consumption: Not specified
Sale has ended
Lot 2740007
Pneumatic Press Gechter GmbH LP-ZS 4 | 1999
Binding Handling & Loading Fee:
35 € (EURO)
• Manufacturer: Gechter GmbH & Co. Werkzeug- und Maschinenbau KG • Location: Karl-Bröger-Straße 12, 91058 Erlangen, Germany • Type: LP-ZS 4 • Nominal Force: 45 kN • Year of Manufacture: 1999 • Machine No.: 80196 • Overrun Distance: 17 mm • Safety Distance: 160 mm • CE Certified: Yes
Sale has ended
Lot 2740008
Extraction System Ruwac Absauganlage | 1999
Binding Handling & Loading Fee:
75 € (EURO)
• Manufacturer: Ruwac • Model: Extraction System (Absauganlage) • Year of Manufacture: Not specified • Voltage: 400 V • Phase: 3~ • Frequency: 50 Hz • Power: 5.3 kW • Current: 11.5 A • Weight: Approx. 25 kg • Serial No.: 9M-9996056 • Inventory No.: 10032882 (Schaeffler internal) • Description: Ruwac Industrial Vacuum System
Sale has ended
Lot 2740009
Pneumatic Press Gechter GmbH LP-ZS 4 | 2001
Binding Handling & Loading Fee:
35 € (EURO)
• Manufacturer: Gechter GmbH & Co., Werkzeug- und Maschinenbau KG, Erlangen, Germany • Type: 45 kN LP ZS 4 • Year of Manufacture: 2001 • Machine No.: 80450 • Overrun Distance: 18 mm • Safety Distance: 176 mm • Inventory No.: 510319 (INA internal)
Sale has ended
Lot 2740010
Hydrostatic Filter Hoffmann | 2001
Binding Handling & Loading Fee:
55 € (EURO)
Sale has ended
Lot 2740011
Centerless Grinder Nomoco C230V | 2002
Binding Handling & Loading Fee:
375 € (EURO)
IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded.
The machine was used for Plunge Grinding
Sale has ended
Lot 2740012
High-Lift Truck Linde L 10 | 2002
Binding Handling & Loading Fee:
55 € (EURO)
• Manufacturer: Linde AG, Aschaffenburg • Model: L 10 • Year of Manufacture: 2002 • Serial Number: W4X379N01319 • Load Capacity: 1,000 kg • Unladen Weight: 655 kg • Battery Voltage: 24 V • Max. Weight incl. Battery: 1,470 kg
Sale has ended
Lot 2740013
Precision Cut-off Grinding Machine Leco Viper 300 | 2004
Binding Handling & Loading Fee:
35 € (EURO)
• Component: Precision Cut-off Grinding Machine • Manufacturer: Leco • Model: Viper 300 • Serial Number: 30087 • Year of Manufacture: 2003 • Voltage: 400 V • Frequency: 50 Hz • Apparent Power: 4.0 kVA • Current: 16 A
Sale has ended
Lot 2740014
ES-Test Bench for Hydraulic Cam Phasers | 2005
Binding Handling & Loading Fee:
75 € (EURO)
Sale has ended
Lot 2740015
Multi-Spindle Automatic Lathe Index MS18C | 2006
Binding Handling & Loading Fee:
650 € (EURO)
IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded.
Consisting of 4 Packages: Main Machine: 310 × 240 × 320 cm Bar Feeder: 470 × 240 × 230 cm Cooling Unit: 240 × 150 × 200 cm Chip Conveyor with High-Pressure Unit: 240 × 320 × 190 cm (Note: Oil Filtering Unit not included with this machine.) Technical Specifications (Data without guarantee): Spindles: 6 Maximum Spindle Speed: 5,000 rpm Bar Capacity: 18 mm Spindle Bore: 52 mm Travel (X / Y / Z): 35 mm / 20 mm / 85 mm Rapid Traverse Speed (X, Y, Z): 24 m/min Maximum Turning Diameter (over cross-slide): ≤ 18 mm Maximum Turning Length: 280 mm Total Installed Power: ~29 kW CNC Control: Siemens 840D
Sale has ended
Lot 2740016
Grinding Center Maegerle MGC-130 | 2007
Binding Handling & Loading Fee:
495 € (EURO)
IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded.
Sale has ended
Lot 2740017
CNC OD Grinding (Face Grinding) Machine Meccanica Nova Novamatic 2G P 10/90 CNC-D | 2008
Binding Handling & Loading Fee:
125 € (EURO)
• Component: CNC Internal Cylindrical Grinding Machine • Manufacturer: Meccanica Nova S.p.A., Italy • Model: Novamatic 2G P 10/90 CNC-D • Serial Number: 1972000826 • Year of Manufacture: 2008 • Total Installed Power: 46 kW • Main Voltage: 400 V, 50 Hz • Control Voltage: 230 V AC, 24 V DC • Average Cycle Absorption: 68 A • Protection Class: IP 64 • Machine Weight: 5,500 kg
Sale has ended
Lot 2740018
CNC OD Grinding (Face Grinding) Machine Meccanica Nova Novamatic 2G P 10/90 CNC-D | 2008
Binding Handling & Loading Fee:
125 € (EURO)
Main Information: • Model: Novomatic 2G • Type: P 10/90 CNC-D • Serial Number: 1972000905 • Year of Manufacture: 2008 • Order No.: 960/52954538 Electrical Data: • Total Installed Power: 46 kW • Mains Voltage: 400 V – 50 Hz • Control Voltage: 230 V AC / 24 V DC • Average Cycle Absorption: 66 A • Wiring Diagram No.: 1080220420
Sale has ended
Lot 2740019
Electric Forklift for Mandrel Lifting Logitrans QBM-1 | 2016
Binding Handling & Loading Fee:
55 € (EURO)
• Model / Type: QBM-1 • Capacity: 100 kg • Serial Number: 16IE54152302 • Own Weight: 47 kg • Manufacturer: Logitrans A/S, Hillerupvej 35, DK-6760 Ribe, Denmark • CE Marked: Yes
Sale has ended
Lot 2740020
Strapping Machine M.J. Maillis/Sander GmbH & Co. KG TP-702 | 2018
Binding Handling & Loading Fee:
35 € (EURO)
• Manufacturer: M.J. Maillis / Sander GmbH & Co. KG • Model: TP-702 • Year of Construction: 2018 • Aggregate No. (Agg.-Nr.): A72145
Sale has ended
Lot 2740021
Manipulator Lissmac Posimat PB 80 | 2015
Binding Handling & Loading Fee:
55 € (EURO)
Sale has ended
Lot 2740022
7‑axis collaborative Robot System Schaeffler / Franka Emika 73681342 / Roboter Beladehandling EVTE | 2020
Binding Handling & Loading Fee:
55 € (EURO)
All Data without Guarantee (drawn from Manual of the OEM): Release Version: April 2020 Degrees of freedom: 7 Payload: 3 kg Workspace: see page 36 Maximum reach: 855 mm Force/Torque sensing: link-side torque sensors in all 7 axes Expected nominal lifetime: 20,000 h Joint position limits: A1, A3, A5, A7: -166°/166°, A2: -101°/101°, A4: -176°/-4°, A6: -1°/215° Mounting flange: DIN ISO 9409-1-A50 Installation position: upright Weight: ~ 17.8 kg Moving mass: ~ 12.8 kg Protection rating: IP30 Ambient temperature: 15 – 25 °C (typical), 5 – 45 °C (extended) Air humidity: 20 – 80 % non-condensing Power consumption: max. ~ 350 W, typical application ~ 60 W Interfaces: ethernet (TCP/IP) for visual intuitive programming with Desk, input for external enabling device, input for external activation device or safeguard, Control connector, Connector for end effector Controller size (19”): 355 x 483 x 89 mm (D x W x H) Supply voltage: 100 – 240 VAC Mains frequency: 47 – 63 Hz Power consumption: ~ 80 W Active power factor correction (PFC): yes Weight (control): ~ 7 kg Protection rating (control): IP20 Ambient temperature (control): 15 – 25 °C (typical), 5 – 45 °C (extended) Air humidity (control): 20 – 80 % non-condensing Interfaces (control): ethernet (TCP/IP) for internet and/or shop-floor connection, power connector IEC 60320-C14 (V-Lock), Arm connector Joint velocity limits: A1, A2, A3, A4: 150°/s, A5, A6, A7: 180°/s Cartesian velocity limits: up to 2 m/s end effector speed Pose repeatability:
Sale has ended
Lot 2740023
7‑axis collaborative Robot System Schaeffler / Franka Emika 73681342 / Roboter Beladehandling EVTE | 2020
Binding Handling & Loading Fee:
55 € (EURO)
All Data without Guarantee (drawn from Manual of the OEM): Release Version: April 2020 Degrees of freedom: 7 Payload: 3 kg Workspace: see page 36 Maximum reach: 855 mm Force/Torque sensing: link-side torque sensors in all 7 axes Expected nominal lifetime: 20,000 h Joint position limits: A1, A3, A5, A7: -166°/166°, A2: -101°/101°, A4: -176°/-4°, A6: -1°/215° Mounting flange: DIN ISO 9409-1-A50 Installation position: upright Weight: ~ 17.8 kg Moving mass: ~ 12.8 kg Protection rating: IP30 Ambient temperature: 15 – 25 °C (typical), 5 – 45 °C (extended) Air humidity: 20 – 80 % non-condensing Power consumption: max. ~ 350 W, typical application ~ 60 W Interfaces: ethernet (TCP/IP) for visual intuitive programming with Desk, input for external enabling device, input for external activation device or safeguard, Control connector, Connector for end effector Controller size (19”): 355 x 483 x 89 mm (D x W x H) Supply voltage: 100 – 240 VAC Mains frequency: 47 – 63 Hz Power consumption: ~ 80 W Active power factor correction (PFC): yes Weight (control): ~ 7 kg Protection rating (control): IP20 Ambient temperature (control): 15 – 25 °C (typical), 5 – 45 °C (extended) Air humidity (control): 20 – 80 % non-condensing Interfaces (control): ethernet (TCP/IP) for internet and/or shop-floor connection, power connector IEC 60320-C14 (V-Lock), Arm connector Joint velocity limits: A1, A2, A3, A4: 150°/s, A5, A6, A7: 180°/s Cartesian velocity limits: up to 2 m/s end effector speed Pose repeatability:
Sale has ended
Lot 2740024
Disk Grinding Machine | 1994
Binding Handling & Loading Fee:
35 € (EURO)
Sale has ended
Lot 2740025
Platform Lifting Device PFAFF Hebezeugfabrik 040007617 | 2005
Binding Handling & Loading Fee:
35 € (EURO)
• Type: 040007617 • Serial No. (Ser.-Nr.): 20097194-0001 • Year of Manufacture (Baujahr): 2005 • Capacity (Hublast): 1.0 t • Lifting Height (Hubhöhe): 0.72 m • Weight (Gewicht): 160 kg • Standards: EN 60 529 / EN 60 034-5
Sale has ended
Lot 2740026
Inductive Shrink Fit Machine with Cooling Unit HAIMER Power-Clamp | 2001
Binding Handling & Loading Fee:
35 € (EURO)
Package Size: 120x80x200cm
Sale has ended
Lot 2740027
High-Power Solid-State Laser (Source, Head plus Coolant) Trumpf Laser GmbH TruDisk 2002 (FD 24) | 2020
Binding Handling & Loading Fee:
75 € (EURO)
• Type: TruDisk 2002 (FD24) • Equipment No. (Equi.-No.): L4212M0904 • Date of Manufacture: December 2016 • Power: 11.8 kW / 12.6 kVA • Voltage Range: 380 V (–10 %) … 460 V (+10 %), 3AC + PE • Current: 18 A @ 400 V • Frequency: 50 … 60 Hz • Protection Class: IP54 • Weight: 550 / 470 kg • Fan Type: 4/2 LLK • Short Circuit Current Rating (SCCR): Icn 13 kA • Internal Reference: 20-10-03-A202 • Compliance: 21 CFR Chapter I, Subchapter J
Sale has ended
Lot 2740028
High-Power Solid-State Laser (Source, Head plus Coolant) Trumpf Laser GmbH TruDisk 2002 (FD 24) | 2020
Binding Handling & Loading Fee:
75 € (EURO)
• Type: TruDisk 2002 (FD24) • Equipment No. (Equi.-No.): L4212M0903 • Date of Manufacture: December 2016 • Power Consumption: 11.8 kW / 12.6 kVA • Voltage Range: 380 V (–10 %) … 460 V (+10 %), 3AC + PE • Current Rating: 18 A @ 400 V • Frequency: 50 … 60 Hz • Protection Class: IP 54 • Weight: 550 / 470 kg • Fan Type: 4/2 LLK • Short Circuit Current Rating (SCCR): Icn 13 kA • Internal Reference: 20-10-03-A202 • Compliance: 21 CFR Chapter I, Subchapter J
Sale has ended
Lot 2740029
Riveting Machine D. Friedrich GmbH NC | 2014
Binding Handling & Loading Fee:
35 € (EURO)
• Manufacturer: D. Friedrich GmbH & Co. KG • Location: Unterer Wasen 6, 73630 Remshalden, Germany • Website: www.fmw-friedrich.de • Product: Nietmaschine (Riveting machine) • Type: NC • Serial Number: B4845 • Year of Manufacture: 2014 • Weight: 350 kg • Max. Pressure: 6 bar • Cycle Rate: 1/min • Voltage (U): 230 V • Frequency (f): 50 Hz • Current (I): 5.9 A • Power (P): 1.6 kW • Country of Manufacture: Germany • CE Marked: Yes
Sale has ended
Lot 2740030
CNC Vertical Lathe Pittler T&S GmbH PVSL2/2-2P | 2016
Binding Handling & Loading Fee:
495 € (EURO)
IMPORTANT: The sale and delivery of this machine are strictly limited to customers whose registered office and delivery address are located within the European Union (EU). Delivery to recipients outside the European Union is excluded.
Machine Details – PITTLER General Data • Machine type: Pittler PV SL 2 / 2-2P • Machine No.: LP 038 • Year of manufacture: 2016 • Control: Siemens Sinumerik 840 DSL • Transport weight: approx. 17,000 kg • Total weight: approx. 19,500 kg • Machine height: approx. 3,900 mm Spindle Data • Motor spindle (left/right) • Max. motor power: 67 kW at 100 % duty cycle • Max. speed: 4,000 rpm • Max. torque: 585 Nm at 100 % duty cycle • Spindle flange: Ø 220 mm (DIN 6353, for chuck) • Swing diameter: max. 450 mm Workpiece Clamping • Hydraulic, with pressure and stroke monitoring • Clamping cylinder: OVS 130 (Röhm) • Clamping device: SAV-HSW-420/6 (customer supply) Axis Travels • Cross slide left: X max. 1,385 mm, Z max. 500 mm • Cross slide right: X max. 925 mm, Z max. 480 mm • Feed force X/Z: 8 kN each at 40 % duty cycle • Rapid traverse X: 0–40,000 mm/min • Rapid traverse Z: 0–24,000 mm/min Tool Turret • Manufacturer: SAUTER, size 20 (0.5.435.220) • Tool holders: 8 × VDI 50, SW360, DIN 69880 • Driven tools: yes • Max. speed: 4,000 rpm • Max. torque: 63 Nm Fluid Technology • Pneumatics: inlet pressure 5–12 bar, system pressure 5 bar • Hydraulics: HYDAC Tank volume: approx. 60 l Accumulator: 2 × 3.5 l + 1 × 1.4 l Lubrication & Coolant • Central lubrication: SKF Nogel • Fresh oil tank: approx. 6 l • Waste oil tank: 2 × approx. 10 l • Coolant system: customer-side central system • Conveyor: Mayfran hinge belt conveyor • Coolant volume: approx. 170 l • Motor spindle cooling unit: Hydac, tank approx. 21 l
Sale has ended
Auction Software by Bidlogix
