Private Treaty Sale | Complete Contents of Former Persil Factory for Sale

2000 liter stainless steel vertical agitated mixing tank, 2636 liter total volume, internal pressure atmospheric, 1240mm diameter x 2050mm straight side, bolt flat top and weld coned bottom, top mounted agitator drive, driven by 2.2kW, 3/50-60/230-400/460 volt, 1450/1760 rpm IP55 motor via a reduction gearbox, 3-blade marine type impellor, 3-internal baffle plates on sidewall, top opening with stainless steel feed chute, mounted on lugs with load cells, built on weigh terminal, model DFWATEX-IO

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

24.000 liter 316 stainless steel vertical jacketed mixing tank system, manufactured by Antico Olindo e Cesare srl, fabrik #228, internal design pressure atmospheric @ 10-100 degrees C (24.000 liter), jacket 6 bar @ 164.1 degrees C, weld dished top, weld dished bottom, 3.1m diameter x 2880mm straight side, half way down the straight side the vessel unbolts into 2- parts, top mounted hydraulic driven agitator drive, powerpack driven by 37kW, 3/50/380/660 volt, 1475 rpm EEx d IIB T3 IP55 motor, (3) sets of 2-blade pitch paddles on shaft, possibly packed gland, 2-internal baffle plates on sidewall, 316 stainless steel half pipe coil jacket on straight side and bottom dish, openings top: 1-500mm manway, 1-150mm, 29-125mm, 1-100mm (sightglass), 15-100mm, straight side: 5-50mm (jacket), 1-25mm, bottom: 1-200mm, 1-50mm (jacket), mounted on lugs, system includes (1) built on Touch controller, (1) approx 75 liter 316 stainless steel preparation liquid tank, weld flat top and bottom, 400mm diameter x 600mm straight side, (1) approx 196 liter stainless steel perfume tank, weld flat top and bottom, 500mm diameter x 1m straight side, (1) 316 stainless steel rotary lobe pump, manufactured by Alfa Laval, model NMOG/822V, driven by 11/12.6kW, 3/50-60/400-690/460 volt, 1465/1755-1770 rpm IP56 motor, mounted on a baseplate

3500 liter stainless steel vertical jacketed tank, 4230 liter total volume, 1.6m diameter x 1.8m straight side, bolt flat top and weld slight coned bottom, carbon steel half pipe coil jacket on straight side only, mounted on legs

5000 liter stainless steel vertical tank, 5878 liter total volume, pressure rated atmospheric, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted,

36,000 liter stainless steel horizontal tank, 3m diameter x 5.5m straight side, weld dished ends, mounted on fixed saddles

3500 liter 304 stainless steel vertical tank, pressure atmospheric, 1587mm diameter x 1961mm straight side, weld flat top and weld sloped bottom, internal spray ball, mounted on a stainless steel skirt,

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, bolted sectional designed tank, stainless steel internal coil on bottom only, base mounted

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

3500 liter 304 stainless steel vertical tank, 1587mm diameter x 1961mm straight side, weld flat top and weld sloped bottom, internal spray ball, with low level sensor, mounted on a stainless steel skirt,

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, stainless steel internal coil on bottom only, base mounted

9000 liter stainless steel vertical tank with internal coil, 9971 liter total volume, 2.3m diameter x 2.3mm straight side, bolt flat top and weld slight coned bottom, stainless steel internal pipe coil on lower half of straight side, (14) turns high and (3) turns on bottom cone, mounted on legs

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

stainless steel rotary lobe positive displacement pump, manufactured by Alfa Laval, model NM0G/732V, serial #322820A, driven by 7.5kW, 3/50/220-380/230-400/240-415 volt, 1450 rpm IP55 motor via a vari speed gearbox, mounted on a baseplate

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

3400 liter aluminium vertical tank, 4256 liter total volume, 2m diameter x 1.1m straight side, bolt flat top and weld dished bottom, mounted on legs

15.000 liter fibreglass resin horizontal tank, 15,313 liter total capacity, manufactured by Selip, type CT/150, 2.2m diameter x 3220mm straight side, dished ends, mounted on fixed saddles,

approx 108.8 square meter stainless steel plate heat exchanger, manufactured by Alfa Laval, type P31-HX, serial #30100-10866, max working pressure 10 bar on both sides, approx (340) 430mm wide x 1154mm high stainless steel plates, carbon steel pressure plates and frame,

4500 liter stainless steel vertical tank, 5057 liter total volume, 1.6m diameter x 2480mm straight side, weld flat top and weld sloped bottom, base mounted

20.000 liter fibreglass resin horizontal tank, 20,149 liter total volume, 2.3m diameter x 4350mm straight side, flat ends, mounted on 4-fexed saddles

9000 liter stainless steel vertical tank, 9256 liter total capacity, internal pressure atmospheric, 2.2m diameter x 2410mm straight side, weld flat top and weld sloped bottom base mounted

16.000 liter fibreglass horizontal tank, 16.000 liter total volume, 2.3m diameter x 4350mm straight side, flat ends, mounted on 4-fixed saddles

18.000 liter fibreglass horizontal tank, 18,470 liter total volume, 2.3m diameter x 3785mm straight side, dished ends, mounted on 4-fixed saddles, with ladder and gantry

12,000 liter stainless steel vertical jacketed mixing tank system, internal pressure atmospheric, bolt flat top, weld dished bottom, approx 2.2m diameter x 3m straight side, top mounted agitator driven by 15kW, 3/50/380/660 volt, 1470 rpm IP56 motor via a reduction gearbox, (2) sets of 3-blade pitched paddles on shaft, possibly packed gland, 3-internal baffle plates on sidewall, stainless steel half pipe coil jacket on straight side and bottom dish, mounted on lugs, unit with: (1) approx 1000 liter stainless steel feed tank, bolt flat top, weld coned bottom, 1.2m diameter x 1m straight side, (1) approx 250 liter stainless steel feed tank, bolt flat top, weld coned bottom, 800mm diameter x 500mm straight side,

stainless steel plate heat exchanger, manufactured by Alfa Laval, type T8-MFG, serial #30110-31229, max working pressure side A 10 bar @ 150 degrees C (12.1 liter), side B 10 bar @ 65 degrees C (12.1 liter), (34) 350mm wide x 780mm high stainless steel plates, carbon steel pressure plates and frame,

28,000 liter stainless steel horizontal tank, 30,252 liter total volume, 2.4m diameter x 6m straight side, weld dished ends, tank unbolts into 2-pieces for removal, mounted on fixed saddles

3000 liter stainless steel vertical tank, 3300 liter total volume, 1450mm diameter x 2000mm straight side, weld flat top, weld coned bottom, top openings: 1-450mm manway, 2-100mm, 2-75mm, bottom: 1-100mm, mounted on legs, with stainless steel steps and platform

1.4m diameter Polypropylene scrubber column system, manufactured by Malaguti Impianti, 4500 m3/hr flow, coulm capcity 1500liter, temperature 35 degrees C, column 1.4m diameter x 5m total height, coned top, flat bottom, internal spray pipes, (1) 8m3/hr pump, driven by 3hp motor, pipework, valves

15.000 liter fibreglass resin horizontal tank, 15,313 liter total capacity, manufactured by Selip, type CT/150, 2.2m diameter x 3220mm straight side, dished ends, mounted on fixed saddles,

15.000 liter stainless steel horizontal tank, 15,313 liter total capacity, 2.2m diameter x 3220mm straight side, weld dished ends

9000 liter stainless steel vertical tank, 9971 liter total capacity, manufactured by Civadac s.p.a, 2.4m diameter x 2.4m straight side, weld slight coned top and weld sloped bottom, base mounted, insulated and cladd,

3500 liter stainless steel vertical jacketed tank, 1.6m diameter x 1.8m straight side, bolt flat top and weld dished bottom, carbon steel half pipe coil jacket on straight side and bottom dish, mounted on legs

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-4, 3-blade pitched paddle on shaft, base mounted, forkliftable

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, stainless steel internal coil on bottom only, base mounted

4500 liter stainless steel vertical tank, 5057 liter total volume, 1.6m diameter x 2480mm straight side, weld flat top and weld sloped bottom, base mounted

3 cubic meter stainless steel electrical heated drum warmer, manufactured by Amarc srl, CE, serial #A612, type, CCE10S-O4, 3 phase, 50Hz, 400 volt, 11kW, temperature upto 100 degrees C, can be used with 4 x 200 liter drums on 1 pallet or 1 x 1000 liter IBC, working dimensions (internal): 1.4m wide x 1450mm deep x 1520mm high, stainless steel hinged single front door, (1) internal circulation fan, driven by 0.75kW, 3/50/230-400 volt, 2760 rpm motor, built on controls,

4500 liter stainless steel vertical tank, 5057 liter total volume, 1.6m diameter x 2480mm straight side, weld flat top and weld sloped bottom, base mounted

5000 liter stainless steel vertical tank, 5100 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-15, 3-blade pitched paddle on shaft, base mounted, forkliftable

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

1000 liter 304 polished stainless steel vertical agitated tank with electric heat tracing, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/400 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, straight side with electrical heating tracing, bottom of sidewall with low level float, mounted on legs

5000 liter stainless steel vertical tank, 5250 liter total volume, 1.7m diameter x 2290mm straight side, weld slightly dished top and weld sloped flat bottom, bottom side with a level sensor, base mounted

5000 liter stainless steel vertical tank, 5878 liter total volume, pressure rated atmospheric, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted,

approx 202.7 square meter stainless steel plate heat exchanger, manufactured by Alfa Laval, type M15-MFG8, serial #30102-34900, max working pressure 10 bar @ 90 degrees C on both sides, 800 liter, approx (327) 450mm wide x 1.5m high stainless steel plates, carbon steel pressure plates and frame,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

2000 liter stainless steel vertical agitated mixing tank, pressure rated atmospheric, bolt flat top, weld coned bottom, 1.2m diameter x 1.8m straight side, top mounted Lightnin agitator drive, model ECL-H5Q-3, 2.2kW, 296 rpm, driven by 2.2kW, 3/50/230/400 volt, 1440 rpm Ex dII BT4 IP55 motor, 2-sets of 3-blade pitched paddles on shaft, 3-internal baffle plates on sidewall, mounted on lugs with load cells, (1) stainless steel centrifugal pump, (1) built on weigh terminal, model DFWATEX2GDF,

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, 2.5m diameter x 3260mm straight side, dished ends, mounted on fixed saddles

1000 liter stainless steel vertical tank, 1394 liter total volume, pressure rated atmosheric, 1m diameter x 1750mm straight side, weld flat top and weld sloped bottom, straight side with electric heat tracing, mounted on legs

5000 liter stainless steel vertical tank, 5157 liter total volume, pressure rated atmospheric, 1.8m diameter x 2m straight side, bolt flat top and weld coned bottom, mounted on legs, with carbon steel ladder

15.000 liter fibreglass resin horizontal tank, 15,313 liter total capacity, manufactured by Selip, type CT/150, 2.2m diameter x 3220mm straight side, dished ends, mounted on fixed saddles,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, 0.25kW, serial #554545-1, 3-blade pitched paddle on shaft, base mounted, forkliftable

16.000 liter fibreglass horizontal tank, 16.000 liter total volume, 2.3m diameter x 4350mm straight side, flat ends, mounted on 4-fixed saddles

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, manufactured by Selip, type CTT/200, 2.5m diameter x 3260mm straight side, weld dished ends, mounted on fixed saddles

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-7, 3-blade pitched paddle on shaft, base mounted, forkliftable

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

50,000 liter 304L stainless steel vertical tank, 54,864 liter total volume, internal rated atmosheric, 3.6mm diameter x 5350m straight side, weld flat top, weld sloped bottom, base mounted, with ladder and handrail

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, serial #554545-2, 3-blade pitched paddle on shaft, base mounted, forkliftable

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

25.000 liter stainless steel horizontal tank, 12,204 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted

3 cubic meter stainless steel electrical heated drum warmer, manufactured by Amarc srl, CE, serial #A591, type, CCE10S-O41P, 3 phase, 50Hz, 400 volt, 11kW, temperature upto 100 degrees C, can be used with 4 x 200 liter drums on 1 pallet or 1 x 1000 liter IBC, working dimensions (internal): 1.4m wide x 1450mm deep x 1520mm high, stainless steel hinged single front door, (1) internal circulation fan, driven by 0.75kW, 3/50/230-400 volt, 2760 rpm motor, built on controls,

4000 liter stainless steel vertical tank, 4215 liter total volume, 1.5m diameter x 2340mm straight side, weld flat top and weld sloped bottom, base mounted

5000 liter stainless steel vertical tank, 5878 liter total volume, pressure rated atmospheric, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted,

40,000 liter fibreglass horizontal tank, 40,616 liter total volume, manufactured by Selip, type CT/400 B, 2.5m diameter x 7350mm straight side, dished ends, mounted on fixed saddles and metal skid

50.000 liter 304 stainless steel horizontal tank, 52,280 liter total capacity, 2.5m diameter x 9914m straight side, weld dished ends, mounted on fixed saddles,

28.000 liter 316 stainless steel horizontal tank, manufactured by CO.ME.S s.n.c, fabrik #580, pressure atmospheric @ 50 degrees C (28,086 liter), 2.1m diameter x 7.5m straight side, weld dished ends, mounted on fixed saddles,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25A air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

30,000 liter stainless steel vertical rectangular tank, 31,800 liter total volumne, 3m wide x 5.3m long x 2m straight side, bolt flat bottom, base mounted, tank unbolts into sections,

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

5000 liter stainless steel vertical tank, 5157 liter total volume, pressure rated atmospheric, 1.8m diameter x 2m straight side, bolt flat top and weld coned bottom, mounted on legs, with carbon steel ladder

5500 liter stainless steel vertical tank, 5878 liter total capacity, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted

3500 liter stainless steel vertical jacketed tank, 3823 liter total volume, 1.6m diameter x 1.8m straight side, bolt flat top and weld dished bottom, carbon steel half pipe coil jacket on straight side and bottom dish, mounted on lugs

4000 liter stainless steel vertical tank, 4595 liter total volume, 1.5m diameter x 2.6m straight side, weld flat top and weld flat bottom, base mounted

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, stainless steel internal coil on bottom only, base mounted

4500 liter stainless steel vertical tank, 4725 liter total volume, 1.6m diameter x 2.3m straight side, weld flat top and weld sloped bottom, base mounted,

approx 6 square meter 316 stainless steel plate heat exchanger, manufactured by Fiorini Industries, type PHE F 016 316 0,5 EPDM 043-1 10bar PEDI #, serial #5665 1 092014 1, CE, max working pressure 10 bar @ 160 degrees C (7.35 liter) on both sides, (43) 250mm wide x 850mm high 316 stainless steel plates, carbon steel pressure plate and frame,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, 0.25kW, serial #554545-3, 3-blade pitched paddle on shaft, base mounted, forkliftable

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted,

approx 1700 liter stainless steel vertical tank, 880mm diameter x 2.9m straight side, weld flat top, weld sloped bottom, mounted on a carbon steel skirt,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

15.000 liter stainless steel horizontal tank, manufactured by C.G.C. Ipmianti srl, fabric #406, internal pressure 1 bar @ -5/70 degrees C (15,300 liter), 2.2m diameter x 3220mm straight side, weld dished ends, mounted on fixed saddles,

5000 liter stainless steel vertical tank, 5127 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25A air driven agitator drive, 1.1kW, serial #552413-2, 3-blade pitched paddle on shaft, base mounted, forkliftable

1200 liter 316 stainless steel vertical mixing tank, manufactured by Antico Olindo e Cesare srl, internal pressure atmoshperic @ 80 degrees C, 1250mm diameter x 1.5m straight side, bolt flat top, weld dished bottom, bridge mounted agitator drive, 40-185 rpm, driven by 4kW, 3/50/380/220 volt 1430 rpm IP55 motor via a reduction gearbox, 3-sets of 2-blade pitched paddles on shaft, 3-internal baffle plates on sidewall, mounted on lugs with load cells,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/220/380 volt, 420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

26.000 liter stainless steel horizontal tank, 26,052 liter total capacity, 2.1m diameter x 6750mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

5000 liter stainless steel vertical tank, 5100 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, 0.25kW, serial #554545-9, 3-blade pitched paddle on shaft, base mounted, forkliftable

28.000 liter 316 stainless steel horizontal tank, manufactured by CO.ME.S s.n.c, fabrik #577, pressure atmospheric @ 50 degrees C (28,086 liter), 2.1m diameter x 7.5m straight side, weld dished ends, mounted on fixed saddles,

25,000 liter stainless steel horizontal tank, 25,471 liter total volume, 2.1m diameter x 6750m straight side, weld dished ends, mounted on 3-fixed saddles,

30,000 liter stainless steel vertical tank, 33,467 liter total volume, 2.5m diameter x 6.5m straight side, weld dished top and weld flat bottom, base mounted

15.000 liter stainless steel horizontal tank with internal electric heating elements, 15,313 liter total capacity, 2.2m diameter x 3220mm straight side, weld dished ends, 2 x electric heatering elements mounted on fromt dished end, mounted on fixed saddles, fully insulated and clad

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

5000 liter stainless steel vertical tank, 5127 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted

approx 21.1 square meter stainless steel plate heat exchanger, manufactured by Alfa Laval, type M10-MFG, serial #30101-44854, max working pressure side A 2.4 bar @ 90 degrees C, side B 5 bar @ 90 degrees C, 83 liter, approx (96) 375mm wide x 880mm high stainless steel plates, carbon steel pressure plates and frame,

12.000 liter 316 stainless steel vertical jacketed mixing tank system, manufactured by Preziati & Co, internal design pressure atmospheric @ 200 degrees C (15,500 liter), jacket 6 bar @ 200 degrees C (85 liter), bolt dished top, weld dished bottom, 2.4m diameter x 2810mm straight side, top mounted hydraulic driven agitator drive, powerpack driven by 22kW, 3/50/380/660 volt, 1470 rpm IP55 motor, (2) sets of 900mm diameter 4-blade pitch paddles on shaft, (1) 500mm diameter 4-blade pitched paddle on bottom of shaft, shaft speed 957 rpm, packed gland, 2-internal baffle plates on sidewall, 304 stainless steel half pipe coil jacket on straight side and bottom dish, openings top: 1-500mm manway, 1-200mm, 1-125mm, 29-100mm, side jacket 3-50mm, 2-20mm, bottom: 1-200mm, 1-50mm (jacket), mounted on lugs, system includes (1) approx 75 liter 316 stainless steel preparation liquid tank, weld flat top and bottom, 400mm diameter x 600mm straight side, (1) approx 196 liter stainless steel perfume tank, weld flat top and bottom, 500mm diameter x 1m straight side, (1) 316 stainless steel rotary lobe pump, manufactured by Alfa Laval, model NMOG/822V, driven by 22kW, 3/50/380/660 volt, 1470 rpm EEx d IIB T4 IP55 motor, mounted on a baseplate

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, 3-blade pitched paddle on shaft, base mounted, forkliftable

4000 liter stainless steel vertical tank, 4215 liter total volume, 1.5m diameter x 2340mm straight side, weld flat top and weld sloped bottom, base mounted

28,000 liter stainless steel vertical tank, 30,400 liter total volume, 2.4m diameter x 6270mm straight side, weld dished top, weld slight sloping bottom, base mounted

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted

40,000 liter fibreglass horizontal tank, 40,616 liter total volume, manufactured by Selip, type CT/400 A, 2.5m diameter x 7350mm straight side, dished ends, mounted on fixed saddles and metal skid

50,000 liter 304L stainless steel vertical tank, 54,864 liter total volume, internal rated atmosheric, 3.6mm diameter x 5350m straight side, weld flat top, weld sloped bottom, base mounted, with ladder and handrail

12,000 liter stainless steel horizontal tank, 12,803 liter total volume, pressure rated atmospheric, 2m diameter x 3.5m straight side, weld dished ends, mounted on 2-fixed saddles,

28,000 liter stainless steel horizontal tank, 30,905 liter total volume, 2.5m diameter x 5580mm straight side, weld dished ends, mounted on fixed saddles,

9000 liter carbon steel vertical tank, 9971 liter total volume, 2.3m diameter x 2.3mm straight side, atmospheric presssure, bolt flat top and weldslight coned bottom, mounted on legs

9000 liter stainless steel vertical tank, 9971 liter total volume, 2.3m diameter x 2.3mm straight side, bolt flat top and weld sloped bottom, mounted on legs

3000 liter stainless steel vertical tank, 3200 liter total volume, 1450mm diameter x 1740mm straight side, weld flat top, weld slightly sloped bottom, base mounted, with stainless steel steps and platform

900-12000 liter/hour 304L stainless steel detergent continuous mixing system, manufactured by Brann + Luebbe, type finishing unit 14/3/K1/F70, serial #91914.14, CE 2000, system consists of: (1) 900-12000 liter/hour 304L stainless steel multi-frequency inline dynamic continuous mixer, manufactured by Brann+Luebbe, type KMF 70, serial #919144, CE1999, speed 250/1450 rpm, 236mm diameter rotor, has internal series of opposed rotors & stators, rotors fitted with milled teeth & round studs, driven by 7.5/8.83kW, 3/50-60/380-660/420-720/380-660/480-830 volt, 945/955/1134/1150 rpm IP55 motor, numerous feed openings, (6) Brann+Luebbe 304L stainless steel metering/dosing product feed pumps, 678/729 liter/hour, (2) 304L stainless steel centrifugal pumps, (1) approx 3000 liter 304L stainless steel vertical recycle tank, weld flat top and bottom, 1.4m diameter x 2m straight side, base mounted, (3) 304L stainless steel rotary lobe pumps, (1) control panel, other ancillaries include, pipework, valves, flow meters, etc

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

28.000 liter 316 stainless steel horizontal tank, manufactured by CO.ME.S s.n.c, fabrik #578, pressure atmospheric @ 50 degrees C (28,086 liter), 2.1m diameter x 7.5m straight side, weld dished ends, mounted on fixed saddles,

10,000 liter 304 stainless steel vertical tank, 11,686 liter total volume, pressure rated atmospheric, 2.4m diameter x 2.5m straight side, bolt flat top and weld coned bottom, mounted on legs

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25A air driven agitator drive, 1.1kW, serial #552413-4, 3-blade pitched paddle on shaft, base mounted, forkliftable

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-12, 3-blade pitched paddle on shaft, base mounted, forkliftable

5000 liter stainless steel vertical mixing tank, bolt flat top, weld dished bottom, approx 1.8m diameter x 2.5m straight side, bridge mounted Lightnin agitator drive, series 10, model 150-4, 14.06:1 ratio, 100 rpm, driven by 4kW, 3/50-60/380-660/400-690/415/460 volt, 1445/1450/1755 rpm IP55 motor, 2-sets of 3-balde pitched paddles on shaft, 3-internal baffle plates on sidewall, mounted on legs

26.000 liter stainless steel horizontal tank, 26,052 liter total capacity, 2.1m diameter x 6750mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

25.000 liter stainless steel horizontal tank, 12,204 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-5, 3-blade pitched paddle on shaft, base mounted, forkliftable

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, 2.5m diameter x 3260mm straight side, dished ends, mounted on fixed saddles

22.000 liter fibreglass horizontal tank, 22,767 liter total volume, 2.8m diameter x 3.6m straight side, dished ends, mounted on 4-fixed saddles, with ladder and gantry

3000 liter stainless steel vertical tank, 3200 liter total volume, 1400mm diameter x 2100mm straight side, weld slightly dished top, weld coned bottom, mounted on legs, with stainless steel handrail

13.000 liter 304 stainless steel horizontal tank, 13,800 liter total capacity, 2.2m diameter x 3m straight side, weld dished ends, mounted on fixed saddles,

approx 1700 liter stainless steel vertical tank, 880mm diameter x 2.9m straight side, weld flat top, weld sloped bottom, mounted on a carbon steel skirt,

30,000 liter stainless steel vertical tank with bottom side agitator and internal coil, 33,467 liter total volume, 2.5m diameter x 6.5m straight side, weld dished top and weld flat bottom, bottom of straight side with side agitator, manufactured by SPX flow technology (Plenty), model 16A-38M-TMH4-SS, driven by 4/4.55kW, 3/50-60/400-690/460 volt, 1460/1760-1770 rpm IP55 motor, 3-blade marine type impellor, stainless steel internal coil on bottom and 3-turns up bottom sidewall, base mounted

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted,

12,000 liter stainless steel vertical tank with internal coil, 13,273 liter total volume, 2.6m diameter x 2.4m straight side, bolt flat top, weld slight sloping bottom, internal coil with 5-turns up the bottom of the straight side, base mounted, with carbon steel ladder

22.000 liter 304 stainless steel horizontal tank, 22,361 liter total capacity, 2.2m diameter x 5250mm straight side, weld dished ends, mounted on fixed saddles,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-10, 3-blade pitched paddle on shaft, base mounted, forkliftable

130 square meter 316L stainless steel tube, head and 304 stainless steel shell horizontal inclined heat exchanger, CE1233, manufactured by C.G.C Impianti srl, fabrik #273, design pressure tube side 6 barg @ 5/165 degrees C (248 liter), shell 6 bar @ 5/99 degrees C (940 liter), (468) 19.05mm diameter x 1.65 x 4756mm long 316L stainless steel tubes, 6-pass tube side, single pass shell side, 688mm diameter 304 stainless steel shell with expansion joint, 5.1m overall length, (2) 316L stainless steel bonnet heads, 316L stainless steel tube sheets, mounted on 2-fixed saddles, design code VSR-S-M Ed.95, Mod G 97/23/CE (PED),

26.000 liter stainless steel horizontal tank, 26,052 liter total capacity, 2.1m diameter x 6750mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted

6,800m2 of warehouse space available immediately for short-term rental, equipped with loading bays, yard, and parking.

Promising opportunity for redevelopment as a mixed-use residential and commercial estate.

30KM from Milan, 15KM from Como, Serviced by High Speed Trains and Road Network.

36,000 liter stainless steel horizontal tank, 3m diameter x 5.5m straight side, weld dished ends, mounted on fixed saddles

4500 liter stainless steel vertical tank, 4725 liter total volume, 1.6m diameter x 2.3m straight side, weld flat top and weld sloped bottom, base mounted, heating element mounted in top of the straight side

3500 liter stainless steel vertical tank, 3952 liter total volume, 1.6m diameter x 1.8m straight side, bolt flat top and weld dished bottom, mounted on lugs

9000 liter stainless steel vertical tank, 9971 liter total volume, 2.3m diameter x 2.3mm straight side, bolt flat top and weld sloped bottom, mounted on legs

9000 liter stainless steel vertical tank, 9971 liter total capacity, manufactured by Civadac s.p.a, 2.4m diameter x 2.4m straight side, weld slight coned top and weld sloped bottom, base mounted, insulated and cladd,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

4000 liter stainless steel vertical tank, 4215 liter total volume, 1.5m diameter x 2340mm straight side, weld flat top and weld sloped bottom, base mounted

13.000 liter 304 stainless steel horizontal tank, 13,800 liter total capacity, 2.2m diameter x 3m straight side, weld dished ends, mounted on fixed saddles,

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-2, 3-blade pitched paddle on shaft, base mounted, forkliftable

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

26.000 liter stainless steel horizontal tank, 26,052 liter total capacity, 2.1m diameter x 6750mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

approx 193.8 square meter stainless steel plate heat exchanger, manufactured by Alfa Laval, type M15-FFM8, serial #30101-32193, max working pressure 10 bar @ 90 degrees C on both sides, 620 liter, approx (323) 450mm wide x 1.5m high stainless steel plates, carbon steel pressure plates and frame,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-8, 3-blade pitched paddle on shaft, base mounted, forkliftable

6000 liter stainless steel vertical tank, 6900 liter total volume, 2m diameter x 2m straight side, atmospheric pressure, bolt flat top and weld slight coned bottom, mounted on legs

15.000 liter fibreglass resin horizontal tank, 15,313 liter total capacity, manufactured by Selip, type CTT150, 2.2m diameter x 3220mm straight side, dished ends, mounted on fixed saddles,

20m3/hr stainless steel high shear inline Homogenizer, used for emulsification, dispersion, reacting & Homogenising, manufactured by BWS Technologies Gmbh, model S300.4.3-2.5, serial #5907, pressure 10 bar @ 200 degrees C, belt driven by 45kW, 3/50/400/690 volt, 2980 rpm EExd IIB T4 IP55 motor, mounted on a baseplate

approx 3000 liter stainless steel vertical tank, 1.2m diameter x 2.9m straight side, weld flat top, weld sloped bottom, mounted on a carbon steel skirt,

3500 liter stainless steel vertical tank, 3987 liter total volume, 1.8m diameter x 1.5m straight side, bolt flat top and weld slight sloped bottom, mounted on legs, with 2-heating elements

15.000 liter fibreglass resin horizontal tank with internal coil, 15,313 liter total capacity, 2.2m diameter x 3220mm straight side, dished ends, stainless steel coil on full length of tank bottom, mounted on fixed saddles,

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

5000 liter stainless steel vertical tank, 5243 liter total volume, 1.7m diameter x 2290mm straight side, weld slightly dished top and weld sloped flat bottom, base mounted

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25A air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

20m3/hr @ 60m head 304 stainless steel centrifugal pump, manufactured by KSB, type ETACHROM BC 032-250/1102 C11, 205mm diameter impellor, driven by 11/12.6kW, 3/50-60/400-690/460 volt, 2955/3555-3560 rpm IP55 motor, magnetic drive,

4500 liter stainless steel vertical tank, 4725 liter total volume, 1.6m diameter x 2.3m straight side, weld flat top and weld sloped bottom, base mounted, heating element mounted in top of the straight side

4000 liter stainless steel vertical tank, 4595 liter total volume, 1.5m diameter x 2.5m straight side, weld flat top and weld flat bottom, base mounted,

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/400 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, manufactured by Selip, type CTT/200, 2.5m diameter x 3260mm straight side, weld dished ends, mounted on fixed saddles

4500 liter stainless steel vertical tank, 5057 liter total volume, 1.6m diameter x 2480mm straight side, weld flat top and weld sloped bottom, base mounted

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-17, 3-blade pitched paddle on shaft, base mounted, forkliftable

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, serial #552223-9, 3-blade pitched paddle on shaft, base mounted, forkliftable

20,000 liter stainless steel vertical tank, 20,164 liter total volume, internal pressure 2.5 bar, 2m diameter x 5850mm straight side, weld dished top and bottom, mounted on legs

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25A air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted,

4500 liter stainless steel vertical tank, 4825 liter total volume, 1.6m diameter x 2350mm straight side, weld flat top and weld sloped bottom, base mounted

5500 liter stainless steel vertical tank, 5878 liter total capacity, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted, with stainless steel ladder

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, serial #554314-4, 3-blade pitched paddle on shaft, base mounted, forkliftable

3500 liter 304 stainless steel vertical tank, pressure atmospheric, 1587mm diameter x 1961mm straight side, weld flat top and weld sloped bottom, internal spray ball, mounted on a stainless steel skirt,

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted,

700 liter 304 stainless steel vertical portable tank, 752 liter total volume, manufactured by Broggi Impianti SNC, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, base mounted, forkliftable

7,000 liter stainless steel vertical mixing tank, 7,466 liter total volume, 1.9m diameter x 2.5m straight side, bolt flat top and weld coned bottom, bridge mounted Lightnin agitator drive, model 150-2.2, 14.06:1 ratio, 100 rpm, driven by 2.2/2.55kW, 3/50-60/220-240/380-420/440-480 volt, 1420/1720 rpm IP55 motor, 2-sets of 3-balde pitched paddles on shaft, 3-internal baffle plates on sidewall, mounted on legs,

2000 liter 304 stainless steel vertical tank, 2438 liter total capacity, 1250mm diameter x 1973mm straight side, weld flat top and weld sloped bottom, internal spray ball, dip tube, low level sensor, base mounted,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Axflow model HE25A air driven agitator drive, 0.25kW, serial #554314-1, 3-blade pitched paddle on shaft, base mounted, forkliftable

3500 liter 304 stainless steel vertical tank, 1587mm diameter x 1961mm straight side, weld flat top and weld sloped bottom, internal spray ball, with low level sensor, mounted on a stainless steel skirt,

5000 liter stainless steel vertical tank, 5878 liter total volume, pressure rated atmospheric, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted,

25.000 liter 304 stainless steel horizontal tank, 25,212 liter total capacity, 2.2m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

34.000 liter 316L stainless steel vertical jacketed mixing tank system, manufactured by Antico Olindo e Cesare srl, internal design pressure 2 barg @ 160 degrees C (43,200 liter), jacket 6 barg @ 160 degrees C (1000 liter), working pressure internal atmospheric @ 160 degrees C, jacket 4 bar @ 160 degrees C, weld dished top, weld dished bottom, 3m diameter x 5.1m straight side, top mounted agitator drive, driven by 75/84.6kW, 3/50/60/380-660/400-690/415/440-460 volt, 1470/1475/1480/1770-1780 rpm flameproof EExd IIB T4 IP55 motor, (3) sets of 2-blade pitch paddles on shaft, possibly packed gland, 2-internal baffle plates on sidewall, 304 stainless steel half pipe coil jacket on straight side and bottom dish, mounted on lugs, system includes (1) built on Touch controller, (1) approx 75 liter 316 stainless steel preparation liquid tank, weld flat top and bottom, 400mm diameter x 600mm straight side, (1) 316 stainless steel rotary lobe pump, manufactured by Alfa Laval, model NM0G/832V, driven by 18.5kW, 3/50/220/380 volt, 1470 rpm EEx d IIB T4 IP55 motor, mounted on a baseplate,

5000 liter stainless steel vertical tank, 5127 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted

50.000 liter 304 stainless steel horizontal tank, 52,280 liter total capacity, 2.5m diameter x 9914m straight side, weld dished ends, mounted on fixed saddles,

25.000 liter stainless steel horizontal inclined tank, 26,347 liter total volume, 2.6m diameter x 4m straight side, weld dished ends, mounted on 3-fixed saddles,

5000 liter stainless steel vertical tank, 5878 liter total volume, pressure rated atmospheric, 1.8m diameter x 2290mm straight side, weld flat top and weld sloped bottom, base mounted,

26.000 liter stainless steel horizontal tank, 26,052 liter total capacity, 2.1m diameter x 6750mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

approx 3500 liter stainless steel vertical tank, 3880 liter total volume, bolt flat top, weld dished bottom, approx 1.5m diameter x 2.2m straight side, mounted on legs, with platform and ladder

25,000 liter stainless steel horizontal tank, 27,673 liter total volume, 2.3m diameter x 6m straight side, weld dished ends, mounted on fixed saddles,

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, manufactured by Selip, type CTT/200, 2.5m diameter x 3260mm straight side, weld dished ends, mounted on fixed saddles

12,000 liter stainless steel vertical agitated tank, 13,273 liter total volume, 2.6m diameter x 2.4m straight side, bolt flat top, weld slight sloping bottom, bridge mounted agitator drive, 2-sets of 4-blade pitched paddles on shaft, base mounted, with carbon steel ladder

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, stainless steel internal coil on bottom only, base mounted

12.000 liter 316 stainless steel vertical jacketed mixing tank system, manufactured by Preziati & Co, internal design pressure atmospheric @ 200 degrees C (15,500 liter), jacket 6 bar @ 200 degrees C (85 liter), bolt dished top, weld dished bottom, 2.4m diameter x 2810mm straight side, top mounted hydraulic driven agitator drive, powerpack driven by 22kW, 3/50/220/380 volt, 1470 rpm IP55 motor, (3) sets of 900mm diameter 4-blade pitch paddles on shaft, shaft speed 359 rpm, packed gland, 2-internal baffle plates on sidewall, 304 stainless steel half pipe coil jacket on straight side and bottom dish, approx openings top: 1-500mm manway, 1-200mm, 1-125mm, 29-100mm, side jacket 3-50mm, 2-20mm, bottom: 1-200mm, 1-50mm (jacket), mounted on lugs, system includes (1) approx 75 liter 316 stainless steel preparation liquid tank, weld flat top and bottom, 400mm diameter x 600mm straight side, (1) approx 196 liter stainless steel perfume tank, weld flat top and bottom, 500mm diameter x 1m straight side, (1) 316 stainless steel rotary lobe pump, manufactured by Alfa Laval, model NMOG/822V, driven by 7.5kW, 3/50/400/690 volt, 1450 rpm EExd IIB T4 IP55 motor, mounted on a baseplate

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, bolted sectional designed tank, stainless steel internal coil on bottom only, base mounted

3500 liter 304 stainless steel vertical tank, 1587mm diameter x 1961mm straight side, weld flat top and weld sloped bottom, with low level sensor, mounted on a stainless steel skirt, with stainless steel ladder and platform,

20.000 liter fibreglass resin horizontal tank, 20,510 liter total capacity, manufactured by Selip, type CTT/200, 2.5m diameter x 3260mm straight side, weld dished ends, mounted on fixed saddles

22.000 liter 304 stainless steel horizontal tank, 22,361 liter total capacity, 2.2m diameter x 5250mm straight side, weld dished ends, mounted on fixed saddles,

6000 liter stainless steel vertical agitated tank, 6440 liter total volume, 2m diameter x 2m straight side, bolt flat top and weld flat bottom, top bridge mounted vari-speed agitator drive, driven by approx 5kw motor via a reduction gearbox, 2-sets of 4-blade pitched paddles on shaft, 3-internal baffle plates on sidewall, mounted on legs,

700 liter 304 stainless steel vertical portable tank with air driven agitator, 752 liter total volume, 1m diameter x 955m straight side, weld flat top and weld sloped bottom, Lightnin model HE25AS air driven agitator drive, 1.1kW, 3-blade pitched paddle on shaft, base mounted, forkliftable

25,000 liter fibreglass resin horizontal tank, manufactured by Selip, serial #13.0462.01, type CT/250, pressure atmospheric @ ambient temperature, 1,0kg/dm3 specific density, 2.2m diameter x 5.8m straight side, dished ends, mounted on fixed saddles and metal skid

40,000 liter stainless steel vertical tank with internal coil, 41,351 liter total volume, 4.5m diameter x 2550mm straight side, bolt flat top, weld slight sloping bottom, stainless steel internal coil on bottom only, base mounted

15.000 liter stainless steel horizontal tank, 15,313 liter total capacity, 2.2m diameter x 3220mm straight side, weld dished ends, mounted on fixed saddles, fully insulated and clad

5000 liter stainless steel vertical agitiated tank, 5089 liter total volume, 1.8m diameter x 2mm straight side, bolt flat top and weld flat bottom, top bridge mounted vari-speed agitator drive, driven by approx 5kw motor via a reduction gearbox, 2-sets of 4-blade pitched paddles on shaft, 3-internal baffle plates on sidewall, base mounted

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/380 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs

5000 liter stainless steel vertical tank, 5127 liter total volume, atmospheric pressure, 1.6m diameter x 2550mm straight side, weld flat top and weld slightly sloped flat bottom, base mounted

15,000 liter stainless steel horizontal tank, 16,767 liter total volume, 2.5m diameter x 3752mm straight side, weld dished ends, mounted on fixed saddles,

24,000 liter 316 stainless steel vertical jacketed mixing tank system, manufactured by Antico Olindo e Cesare srl, fabrik #236, internal design pressure atmospheric @ 20-70 degrees C (24,800 liter), jacket 6 bar @ 160 degrees C (640 liter), bolt flat top, weld dished bottom, 3.2m diameter x 3250mm straight side, body unbolts into 2 halves, top bridge mounted center Ekato agitator drive, type EM 2100, 70 rpm, driven by 30kW, 3/50/380/660 volt, 1400/70 rpm IP55 motor, 3-sets of 2-blade pitched paddles on shaft, top bridge mounted off center Ekato agitator drive, type EM2030, 568 rpm, driven by 15kW, 3/50/380/660 volt, 1400/568 rpm IP55 motor, 3-blade marine type impellor, 304 stainless steel half pipe coil jacket on straight side and bottom dish, internal feed pipe with spray bars, 4-internal baffle plates on sidewall, openings top: 1-600mm x 650mm square hinged manway, 1-200mm, 4-100mm, straight side: 5-80mm (jacket), 1-3/4", bottom: 1-250mm, 1-100mm (jacket), 1-80mm (jacket), mounted on lugs with load cells,

4000 liter stainless steel vertical tank, 4215 liter total volume, 1.5m diameter x 2340mm straight side, weld flat top and weld sloped bottom, base mounted

approx 213.6 square meter stainless steel plate heat exchanger, manufactured by Alfa Laval, type M15-FFM8, serial #30101-32192, max working pressure 10 bar @ 95 degrees C on both sides, 720 liter, approx (356) 450mm wide x 1.5m high stainless steel plates, carbon steel pressure plates and frame,

4000 liter stainless steel vertical tank, 4155 liter total volume, 1.6m diameter x 2mm straight side, weld flat top and weld slight coned bottom, heating element mounted in the bottom side of straight side, mounted on legs

28.000 liter 316 stainless steel horizontal tank, manufactured by CO.ME.S s.n.c, fabrik #579, pressure atmospheric @ 50 degrees C (28,086 liter), 2.1m diameter x 7.5m straight side, weld dished ends, mounted on fixed saddles,

1000 liter 304 polished stainless steel vertical agitated tank, 1150 liter total volume, manufactured by Brevetti Mitalo Menoni, atmospheric pressure, 1.2m diameter x 1m straight side, flat top and weld coned bottom, agitator driven by 2.2kW, 3/50/230/400 volt, 1420 rpm Eex d IIB T4 IP55 motor, 3-blade marine type impellor, 2-internal baffle plates on sidewall, 1/3rd of top is hinged opening, bottom of sidewall with low level float, mounted on legs