ONLINE AUCTION | SMT Production, Testing, Packaging - Kronach, DE

additional handling fee: 25 EUR

Lot consisting of approx. 700pcs used ESD reel storage bins in very good condition. Features: Stackable design for efficient storage, injection-molded from ESD-safe plastic.

additional handling fee: 25 EUR

Lot consisting of 1 used CAN interface module 2-channel in good condition. Shows moderate signs of use on casing. Features: Interface: USB, D-Sub 9 CAN ports, LED indicators for each channel, Serial: 007129-005436.

additional handling fee: 175 EUR

Lot consisting of 1 unit of used PCB Magazine Unloader. The unit appears to be constructed mainly of metal and features a coated surface with visible signs of wear, including scratches and marks across the exterior. A control panel with function buttons and an emergency stop button is present, as well as a touchscreen interface. Condition is always unchecked. Accessories and documentation: not included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used control unit made by BalTec, model HPP25, manufactured in 2021. The unit is visibly clean, with minor handling marks and scratches. Included are various accessories such as cables, a motor, pneumatic components, and gauges. The lot also includes a documentation folder labeled 'Reliable Connections.' Condition is unchecked. Accessories and documentation: includes cabling, motor, pneumatic parts, and BalTec documentation.

additional handling fee: 25 EUR

Lot consisting of 1 used steel tool cart with visible wear and marks. Includes various tools and accessories such as pliers, crimping tools, bottles of lubricant, and cables. Some drawers contain miscellaneous supplies and items. Left rear caster missing locking functionality. Sold as-is without additional documentation.

additional handling fee: 25 EUR

Lot consisting of 7 units of used worm gear motors. Made of metal with a blue finish. Optical condition shows minor wear such as light scratches and slight signs of previous use. Condition is unchecked. Includes electrical cables attached to each unit. Accessories and documentation: None included.

additional handling fee: 25 EUR

Lot consisting of 1 used bus interface 4-channel CAN/LIN in very good condition. Shows minimal signs of wear. Features: Interface: USB, DB9, and other connector ports, Supports: USB to CAN, LIN, J1708, K-Line, I/O. Make: VECTOR, Model: VN1630, Serial: 007151-500138.

additional handling fee: 25 EUR

Lot consisting of 1 programmable DC power supply HEIDEN ELECTRONICS 1136-032 in good condition. Input: 230 VAC, Output: 0–32 VDC, 10 A nominal, 24 A max. Front panel with display, presets, sense, current limiter. Standard 19" 2U rackmount housing.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 30 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 30 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Multi-pin power and signal interface integrated. Compatible with Panasonic NPM-W series.

additional handling fee: 25 EUR

Lot consisting of 1 unit(s) of used Weight Set, Fab. Kern & Sohn, Model: E2 Calibration 1kg, year 2022. The set is housed in a sturdy silver-tone case, showing minor surface scratches and wear. Interior foam insert securely holds the weights, which appear visually clean and polished. Accessories and documentation: Includes foam insert, calibration certificate stickers attached to the case, and a white handling cloth.

additional handling fee: 1.150 EUR

Lot consisting of 1 used reflow oven. Made of industrial-grade materials. Optical condition: clean, minor superficial wear. Accessories or documentation not included.

additional handling fee: 350 EUR

Lot consisting of 1 used cooling climate system. Outer surfaces show signs of use, including minimal scratches and wear. Siemens Simatic Panel touch screen included. No other accessories documented.

additional handling fee: 25 EUR

Lot consisting of 1 tabletop manual press in operational condition. Constructed of metal, showing signs of prior use such as surface wear and minor scratches. Includes base assembly and additional removable components. Accessories and documentation are not included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Digital Caliper, Fab. ProMat. The device shows visible signs of wear, including minor scratches on the surface. The unit comes housed in a protective blue plastic case with foam padding. Accessories and documentation: Includes the storage case, no additional documentation or accessories visible.

additional handling fee: 25 EUR

Lot consisting of multiple nozzles of undetermined model and year. Made of metal parts secured in a clear plastic calibration casing. Tools appear clean with minor signs of prior use. Accessories or documentation beyond visible items not included.

additional handling fee: 50 EUR

Lot consisting of 1 used lab workbench with integrated power and socket module in good condition. Shows signs of wear from professional use. Features: Siemens circuit breaker and residual current device (RCD), Integrated socket strips and lockable switch, Modular power distribution panel and drawer unit. Electrical: 230 V, 50 Hz, 16 A, 1PH. Dimensions: 180 x 80 x 160 cm, approx. 100 kg.

additional handling fee: 40 EUR

Lot consisting of 4 used single rowed gang change type feeder cart with 27 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 27 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Harting multipin connector power and signal interface integrated. Compatible with Panasonic CM402, CM602, CM401, DT401, CM202, and CM88 series machines.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply 0–32 V, 0–10 A in good condition. Shows signs of moderate wear and scratches from use. Features: Sub-D interface, standby switch, overvoltage protection, Manual control with coarse/fine regulation. Electrical: 115/230 V, 50/60 Hz, 6/3 A.

additional handling fee: 25 EUR

Lot consisting of 1 used digital multimeter 6½-digit in good condition. Shows signs of normal use. Features: Dual input, Truevolt technology, statistical graphics: histogram, bar chart, trend chart, 2- and 4-wire resistance up to 1,000 MΩ, capacitance 1 nF–100 µF, temperature measurement: RTD, thermistor, thermocouple, Interface: USB, LAN, GPIB, Memory: 50,000 rdgs (std), 2 million (opt). Electrical: 100–240 V, 50/60/400 Hz, 0.25–0.5 A.

additional handling fee: 175 EUR

Lot consisting of 1 used magazine unloader single-track in very good condition. Features: Touch panel operation with key switch, pneumatic magazine lift (6 bar, 4 l/min). Electrical: 220–240 V, 50 Hz, 0.9 kVA, 4 A. Weight: 300 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used workstation with visible wear and included hardware components. Base materials appear to be metal and wood. Optical condition shows minor scratches and signs of use. Included Accessories: 2 monitors, HP printer, keyboard, 2 MAXSOL HSL-Tag Programmers. Missing accessories/documentation: None observed.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used 1-segment PCB Conveyor with Pusher, 500mm. The machine is made of metal with visible signs of use, including scratches and minor wear. The unit appears to be clean. Condition is unchecked. Accessories and documentation: none provided.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Multimeter, Fab. Hewlett Packard, Model: 34401A. The unit exhibits minor surface wear with some light scratches visible on the casing. The front panel and display are clean and legible. The device includes connectivity ports on the rear panel for RS-232 and HP-IB interfaces. Accessories and documentation: Not included.

additional handling fee: 75 EUR

Lot consisting of 1 compact PCB handling module with integrated scanner. Unit in very good condition, suitable for inline barcode recognition and tracking. Model: YJ LINK ACC-CE. Integrated Datalogic camera-based scanner. Electrical: 220 VAC, 50 Hz, 0.1 A. Compact standalone design, touch interface.

additional handling fee: 175 EUR

Lot consisting of 1 used magazine loader with steel construction. Optical condition includes minor scratches and signs of prior installation. No accessories or additional documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply single output, adjustable in good condition. Shows moderate signs of use. Features: Manual control, linear regulated, Interface: DB-25, LED display. Electrical: 115/230 V, 50/60 Hz, 6/3 A.

additional handling fee: 50 EUR

Lot consisting of 1 used paper jogger. Metal construction with a stainless finish, clean with minor signs of use. Missing visible accessories and documentation. Includes visible tray and integrated automated mechanism.

additional handling fee: 25 EUR

Lot consisting of 1 used soldering station. Components include control unit, soldering iron holder, and tip cleaning area. Optical condition shows signs of use, including wear and some scratches. Accessories like cables are included; additional documentation or accessories are missing.

additional handling fee: 175 EUR

Lot consisting of 1 used conveyor in clean condition. Manufactured from steel. Optical condition shows normal wear consistent with use and age. No documentation or additional accessories included.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer 300 dpi peel-off in good condition. Shows moderate signs of use such as scratches. Features: Print width: 104.1 mm, Print speed: up to 300 mm/s, Print Head Firmware: 2.1.0, Interfaces: USB, Ethernet, RS232, Parallel, 4x USB Host, SD card slot (max. 512 GB). Electrical: 100–240 V, 50–60 Hz, 2 A max. Dimensions: 46 x 25.2 x 28.8 cm, 10 kg.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used conveyor equipment manufactured by JOT Automation in 2012, model J204-50.4/9. The conveyor is constructed of metal components with a clean finish showing minor surface wear. No visible dents or significant cosmetic damage are present. Condition of the unit is unchecked.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Hot Wire Cutter, Fab. Proxxon, Model: Thermocut 12/E. Optical condition shows minor signs of wear, such as visible surface abrasions. Finish is clean and maintained. Accessories and documentation: Original packaging and manual are included, as seen in images.

additional handling fee: 50 EUR

Lot consisting of 1 Semi-Automated Assembly and End-of-Line Test Station in used condition. The system includes components manufactured by Deprag Schulz GmbH, such as a Type 1511-E50/0,75-1 machine built in 2008, as well as additional equipment, such as a label printer (Model A4+/300P). The system exhibits visible wear consistent with prior usage, including minor surface scratches and wear on the metal surfaces. Condition unchecked.

additional handling fee: 25 EUR

Lot consisting of 1 handheld universal multimeter METRAHIT 2+ in good condition, used. TRMS, 6000 counts, auto socket lock, IP40. Voltage: max 600 V CAT III, Current: max 10 A, 2× 1.5 V LR6. Functions: MIN/MAX, HOLD, backlit display, continuity, temperature.

additional handling fee: 25 EUR

Lot consisting of 1 used programmable multimeter + digital multimeter HM8012 + HM8011-3 in dual mainframe HM8001-2 in good condition. Shows moderate signs of use. Features: Dual-module system: HM8012 (Programmable Multimeter) and HM8011-3 (Digital Multimeter), Installed in HAMEG dual mainframe HM8001-2, 4½ digit resolution, RS-232 interface, LED display. Electrical: 230 V, 50–60 Hz, max. 110 W.

additional handling fee: 50 EUR

Lot consisting of 1 soldering and rework station in used condition. Shows visible signs of usage, dust and wear on housing. Features: 3-channel configuration (soldering, hot air, desoldering), Display unit with menu interface, Integrated vacuum for desoldering. Electrical: 230 V, 1150 W, 5 A fuse.

additional handling fee: 25 EUR

Lot consisting of 1 used ESD solution suction and filter unit by KIST + ESCHERICH, model ES41ESD-0XX-230V. Sale includes tubing and control box with switches.Optical condition shows clean exterior with minor wear such as visible scratches. Condition is unchecked. Accessories and documentation: None visible.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer thermal transfer in good condition. Shows minor signs of previous use. Features: Display + keypad control panel, Label width up to 104 mm, Part Number: ZM400-300E-5100T. Electrical: 100–240 V, 47–63 Hz, 0.3 A. Weight: 4.7 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB conveyor. Metal construction with visible wear including minor scratches and signs of use. Missing documentation.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB conveyor belt in good condition. Shows moderate signs of use from production environment. Features: Manual width adjustment, pushbutton panel control, Transparent safety cover, E-stop switch. Electrical: 220–240 V, 50–60 Hz, 1PH.

additional handling fee: 50 EUR

Lot consisting of 1 used sorting system. Includes integrated conveyors, monitors, and operational controls. Optical condition: clean with visible wear from usage. No documentation or additional accessories included.

additional handling fee: 1.375 EUR

Lot consisting of 1 used Placement Machine. Designed for electronics assembly with steel construction. Minor wear visible; clean units overall. Includes standard control panel and primary components; documentation missing.

additional handling fee: 25 EUR

Lot consisting of 1 used oscilloscope 4+16 channel, 350 MHz in good condition. Minor signs of wear from regular use. Features: 4 analog + 16 digital channels, Bandwidth: 350 MHz, 4 GSa/s sample rate, Interface: USB, LAN, VGA, Mixed Signal capability, Option 600. Accessories: 4x Agilent N2890A passive probes, power cable. Electrical: 100–240 V, 50/60/400 Hz, 100 W max.

additional handling fee: 50 EUR

Lot consisting of 1 used sorting machine. Material: Metal construction. Optical condition appears clean with minor wear and surface scratches consistent with prior use. Accessories include control panel and conveyors; documentation is missing.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply dual-channel, programmable in good condition. Shows minor wear from handling. Features: 62 N 52 RU 50 P, State 3, Output: 0-52 V DC, max 50A, Dual-channel programmable power supply with rotary encoder, Interfaces: RS-232C, IEEE 488. Electrical: 230 V, 50/60 Hz, 1800 VA.

additional handling fee: 50 EUR

Lot consisting of 1 used cabinet with a steel structure and integrated blue drawer units. The structure shows signs of wear, minor dents, and surface scratches. No additional documentation or accessories included.

additional handling fee: 25 EUR

Lot consisting of 15 used servo motors. Materials include steel housing. Optical condition shows signs of wear and scratches typical for used industrial equipment. No documentation or cables included.

additional handling fee: 1.375 EUR

Lot consisting of 1 unit of used Panasonic CM602-L factory automation equipment, made of metal and other materials. Optical condition: visible wear such as scratches and minor discoloration consistent with use. Accessories and documentation: Includes three Panasonic User Manuals.

additional handling fee: 25 EUR

Lot consisting of 1 used soldering station. Made of durable materials suitable for professional or hobbyist use. Optical condition shows minor wear and signs of prior usage, such as scratches. No additional accessories or documentation are included.

additional handling fee: 25 EUR

Lot consisting of 2 units of used label printing and dispensing equipment. Optical condition shows minor wear such as visible scratches and signs of previous use. Includes label printer cab SQUIX 4/300MP and label dispenser cab HS 60+. Accessories and documentation: visible power cables and a monitor, no additional documentation provided.

additional handling fee: 100 EUR

Lot consisting of 20 used SMT component trolleys in good condition. Shows moderate signs of use. Features: 6 shelves, black plastic trays, manual handling with caster-mounted base

additional handling fee: 75 EUR

Lot consisting of 1 used PCB loader/unloader width-adjustable in good condition. Shows moderate signs of use. Features: Desktop configuration with belt-driven transport. Electrical: 220–240 V, 50–60 Hz, 0.5 A. Pneumatic: 0.4 MPa, 10 l/min.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer 300 dpi peel-off in good condition. Shows moderate signs of use such as scratches. Features: Print width: 104.1 mm, Print speed: up to 300 mm/s, Print Head Firmware: 2.1.0, Interfaces: USB, Ethernet, RS232, Parallel, 4x USB Host, SD card slot (max. 512 GB). Electrical: 100–240 V, 50–60 Hz, 2 A max. Dimensions: 46 x 25.2 x 28.8 cm, 10 kg.

additional handling fee: 500 EUR

Lot consisting of assorted spare parts stored in a double-door sheet steel cabinet. Cabinet is made of durable sheet steel and includes multiple labeled compartments containing various components such as signal lamps, guide rollers, and more. Optical condition shows minor surface scratches, and accessories or documentation completeness not guaranteed. List of parts available but inspection recommended.

additional handling fee: 25 EUR

Lot consisting of 1 used pattern generator colour in used condition. Shows moderate signs of use on the casing. Features: Test pattern generator for colour TV systems, PAL/NTSC selectable, manual switch panel, Interface: CVBS, Y/C, SCART, Audio Out L/R, External Audio In. Electrical: 230 V, 50 Hz, 0.2 A.

additional handling fee: 75 EUR

Lot consisting of 1 used vertical FIFO Buffer in good condition. Shows moderate wear from production use. Features: Vertical loader with screw-driven lift mechanism, Touch interface and emergency stop button. Electrical: 220-240 V, 50-60 Hz, 2 Δ. Pneumatic:

additional handling fee: 175 EUR

Lot consisting of 1 used magazine loader/unloader with line loader functionality in used condition. Features: Touch panel and PLC controlled operation, pneumatic magazine lift and PCB pusher. Electrical: 230 V, 50 Hz, 1 kVA, 4 A. Pneumatic: 6 bar, 5 l/min. Weight: 340 kg.

additional handling fee: 150 EUR

Lot consisting of 1 used pallet changer.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 30 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 30 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Multi-pin power and signal interface integrated. Compatible with Panasonic NPM-W series.

additional handling fee: 25 EUR

Lot consisting of 1 functional power supply unit made of metal. Optical condition: clean, with no visible scratches or dents. Includes original box and documentation; no additional accessories noted.

additional handling fee: 25 EUR

Lot consisting of 1 used industrial control panel. Front panel and display appear clean. Includes attached interface cables. No additional documentation or accessories included.

additional handling fee: 25 EUR

Lot consisting of 1 used ultrasonic cleaning unit. Body material is stainless steel. Optical condition shows signs of usage including discoloration and scratches. Top cover included. Tested functionality not specified. Connectors appear present.

additional handling fee: 25 EUR

Lot consisting of 1 used motorized lifting column in very good condition. Features: Spindle-driven lift system with mobile base, Hand control unit and 8-button operation panel, Roller conveyor platform. Electrical: 230 V, 50 Hz, 1PH. Dimensions: approx. 90 x 70 x 200 cm, 50 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used sheetsteel drawer cabinet. Clean with minor scratches and visible wear consistent with use. Includes contents as shown, such as fittings and tools. No missing drawers or major damage visible.

additional handling fee: 25 EUR

Lot consisting of 1 used audio analyzer DC – 110 kHz in very good condition. Analog and digital signal I/O available. Model: Rohde & Schwarz UPL66. Balanced/unbalanced analog & digital input/output. IEEE488, COM1/2, VGA, printer interface. Electrical: 100/120/220/230 V, 50–60 Hz, 160 VA.

additional handling fee: 25 EUR

Lot consisting of 1 used digital oscilloscope. Body shows mild wear with light surface scratches but is in clean condition overall. Accessories and documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used head stand with 2 assembly heads. Constructed of aluminum and steel. Clean optical condition with minor wear. Original packaging and documentation included.

additional handling fee: 500 EUR

Lot consisting of 1 double-door sheet steel cabinet containing assorted spare parts, including hoses, seals, and cables. The cabinet is visually clean with minor wear. Completeness of parts is not guaranteed. On-site inspection recommended.

additional handling fee: 25 EUR

Lot consisting of 1 used industrial vacuum cleaner. Material: plastic. Clean condition with minor wear. Includes power cable, no additional accessories specified.

additional handling fee: 1.150 EUR

Lot consisting of 1 used reflow soldering oven. Metal construction. Unit shows signs of use, including minor scratches, but overall clean. No additional accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 unit(s) of used Power Supply, Fab. Agilent, Model: E3641A. Optical condition reveals signs of use with visible scratches on the casing and minor wear on the front panel. Accessories and documentation: Not included.

additional handling fee: 175 EUR

Lot consisting of 1 unit of used feeder storage rack including approximately 30 defective feeders in various sizes. The rack is made of metal with visible wear, including minor scratches and signs of use. Feeders show visual imperfections such as dents and scratches; their functionality has not been tested or verified. Accessories and documentation: Included error code sheet for feeder repair guidance.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply dual-channel, programmable in good condition. Shows minor wear from handling. Features: 62 N 52 RU 50 P, State 3, Output: 0-52 V DC, max 50A, Dual-channel programmable power supply with rotary encoder, Interfaces: RS-232C, IEEE 488. Electrical: 230 V, 50/60 Hz, 1800 VA.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used refrigerator made of stainless steel. Exterior shows light scratches and signs of general wear. Interior appears clean and includes three wire shelves. Door seals appear intact but condition is unchecked. Accessories and documentation: None.

additional handling fee: 1.375 EUR

Lot consisting of 1 used placement machine by Panasonic in good optical condition. Includes user manuals.

additional handling fee: 175 EUR

Lot consisting of 1 used magazine loader/unloader with line loader functionality in used condition. Features: Touch panel and PLC controlled operation, pneumatic magazine lift and PCB pusher. Electrical: 230 V, 50 Hz, 1 kVA, 4 A. Pneumatic: 6 bar, 5 l/min. Weight: 340 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used lab workbench with integrated power and socket module in good condition. Shows signs of wear from professional use. Features: Siemens circuit breaker and residual current device (RCD), Integrated socket strips and lockable switch, Modular power distribution panel and drawer unit. Electrical: 230 V, 50 Hz, 16 A, 1PH. Dimensions: 180 x 80 x 160 cm, approx. 100 kg.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Sanding Roll Rack, Fab. VSM. The rack displays visible signs of previous use, including scratches and slight wear, but overall appears in clean condition. Accessories and documentation: none included.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply 0–32 V, 0–10 A in good condition. Shows signs of moderate wear and scratches from use. Features: Sub-D interface, standby switch, overvoltage protection, Manual control with coarse/fine regulation. Electrical: 115/230 V, 50/60 Hz, 6/3 A.

additional handling fee: 25 EUR

Lot consisting of 3 electrical motors in Original Packaging

additional handling fee: 25 EUR

Lot consisting of 1 automotive test controller GOEPEL basicCAN 61 PLUS in very good condition. Interfaces: 2–4× CAN/CAN-FD, optional LIN, K-Line, FlexRay, SENT. Connections: USB, Ethernet, 4× D-Sub IO, KL30/KL15/KL31 terminals. Power: external 7–25 VDC.

additional handling fee: 150 EUR

Lot consisting of 1 unit of used Conveyor system JOT Automation machine J213-51/33 made of metal. The machine shows visible surface wear, including scratches and minor paint scuffs consistent with use. Condition is unchecked. Accessories and documentation: none identified.

additional handling fee: 500 EUR

Lot consisting of 1 pre-owned workshop storage system. The system includes metal shelving, drawers, and compartments housing fasteners, drill bits, and small tools. Visible clean condition, some minor wear and labels from previous usage.

additional handling fee: 500 EUR

Lot consisting of 1 used sheet steel cabinet containing assorted spare parts. Cabinet shows scratches and signs of use. Accessories and documentation not included; contents completeness not guaranteed.

additional handling fee: 1.375 EUR

Lot consisting of 1 unit of used factory automation machines, Panasonic CM602-L, made of metal and marked with clear manufacturer labels. Optical condition includes visible signs of use such as minor scuffs, surface wear, and operational markings. Accessories and documentation: Includes user manuals and software CD with a license for Windows XP.

additional handling fee: 175 EUR

Lot consisting of 1 pre-owned magazine unloader. Steel construction. Visibly clean with minor wear such as scuffs to the exterior panels. Included: main console with display and emergency stop. Missing: documentation or accessories.

additional handling fee: 50 EUR

Lot consisting of 1 used cabinet, made of steel sheet. Clean exterior with visible signs of storage and usage. Includes assorted tools, boxes, and hardware such as hammers, screwdrivers, wrenches, files, brushes, organization trays, and other accessories. Small accessories and tools stored in labeled boxes and plastic organizers.

additional handling fee: 25 EUR

Lot consisting of 1 used function generator in very good condition. Fully functional, minor cosmetic signs of use. Model: HAMEG HM8131-2. Frequency range: 0.1 mHz to 15 MHz. Modes: arbitrary waveform, sweep, burst. AM in, TTL trigger, 10 MHz ref I/O, memory card slot. Electrical: 105–245 V AC, 50/60 Hz, 20 W.

additional handling fee: 175 EUR

Lot consisting of 1 used stretch wrapping machine turntable type in good condition. Shows moderate signs of use. Floor-standing design with motorized wrapping, Digital display with program memory, Control: button-operated interface, Performance: Capacity: 1200 kg. Electrical: 230 V, 1.5 kW. Weight: 323 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used screwdriving station dual-spindle in very good condition. Appears fully functional with minor signs of wear. Features: Dual-spindle configuration with torque labeling (0.35 Nm, 0.40 Nm), includes Desoutter balancer (1.4–2.4 kg) and SIMCO AeroStat XC ion blower, screw feeders and torque arms included. Electrical: 24 V, 230 V, 50 Hz, 45 VA / 120 VA.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used Table Saw, Fab. Metabo, Model: TS 250, year: 2008. Shows visible signs of use, such as scratches, dirt, and general wear on the surface. Clean but used optical condition. Accessories and documentation: None visible or provided.

additional handling fee: 25 EUR

Lot consisting of 1 used digital multimeter 4-digit, rack module in used condition. Shows clear signs of use on housing and front panel. Features: Measurement range up to 1000 V DC, 750 V AC, 20 A, 4-digit display, selector from 0.2 to 2000 range. Construction: rack-insert module.

additional handling fee: 25 EUR

Lot consisting of 1 used audio analyzer DC – 110 kHz in very good condition. Analog and digital signal I/O available. Model: Rohde & Schwarz UPL66. Balanced/unbalanced analog & digital input/output. IEEE488, COM1/2, VGA, printer interface. Electrical: 100/120/220/230 V, 50–60 Hz, 160 VA.

additional handling fee: 1.375 EUR

Lot consisting of 1 unit of used Panasonic factory automation equipment, model CM602-L. Visible signs of use include minor scratches and wear on the exterior surfaces. Condition is unchecked, and functionality has not been tested. Accessories and documentation: No additional accessories or documentation identified.

additional handling fee: 75 EUR

Lot consisting of 1 used workshop storage system. Material includes steel framework with plastic storage drawers. Optical condition shows minor wear consistent with use (light scratches and scuffs). Includes an assortment of labeled small hardware components such as screws, nuts, bolts, and electronic parts, distributed across multiple drawers. Missing documentation and inventory details for component specifics.

additional handling fee: 150 EUR

Lot consisting of 1 PCB inverter station by IPTE in good condition.

additional handling fee: 25 EUR

Lot consisting of 1 quantity of approx 15 used safety light curtains. Made of metal and plastic. Optical condition includes minor scratches and wear consistent with use. Includes multiple models; accessories and documentation may vary.

additional handling fee: 25 EUR

Lot consisting of 1 used electric motor constructed of metal. Clean condition with some scratches from prior use. Includes attached mounting base; additional accessories or documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer thermal transfer in good condition. Shows minor signs of previous use. Features: Display + keypad control panel, Label width up to 104 mm, Part Number: ZM400-300E-5100T. Electrical: 100–240 V, 47–63 Hz, 0.3 A. Weight: 4.7 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used calibration toolset. The set is composed of Grauwert-02 Rev.01 and X-Ray Grauwert-01 plates, housed in a protective carrying case. Made from a durable material suitable for precision calibration tasks. Visual inspection shows minimal wear, with no major scratches or dents. Accessories include one protective cloth. Documentation included.

additional handling fee: 50 EUR

Lot consisting of 1 used automated processing unit. Metal frame structure with visible pneumatic and electrical components. Optical condition shows signs of use such as minor scratches. Missing documentation.

additional handling fee: 25 EUR

Lot consisting of 1 magnetic pump with electric motor by IWAKI and VEM MOTORS, models MD-55F and K21R 71 K 2 in good condition.

additional handling fee: 25 EUR

Lot consisting of 3 used vacuum units in operational condition. Made of plastic and metal housings. Optical condition: light surface scratches and signs of wear. Includes hoses, nozzles, and additional attachments. No additional documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 used industrial vacuum cleaner in red plastic housing. Device shows scratches and signs of wear consistent with prior use. Includes attached hose and power cable; missing additional accessories like manuals or extra hoses.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Pressure Monitoring Device, Fab. GE Druck, Model: DPI 800P. The device features visible signs of wear, including minor scratches and handling marks. Accessories and documentation: None provided.

additional handling fee: 25 EUR

Lot consisting of 1 unused ventilation unit. Material: metal and plastic. Optical condition: clean, minor handling wear on packaging. Includes original packaging and documentation as pictured.

additional handling fee: 50 EUR

Lot consisting of 1 unit of a used AOI workstation made of metal and composite materials. The unit shows moderate signs of use, including minor visible scratches and scuffs. The overall exterior condition appears clean. With 2 x 500mm conveyors, 1 x 1000mm conveyor, matrix 2000 barcode scanner, 2 x Datalogic C-Box connection units, overhead light

additional handling fee: 75 EUR

Lot consisting of 1 used PCB Handling Station. Constructed primarily of steel and other durable materials. Optical condition includes clean surfaces, minor wear from use. Includes integrated computer system, interface peripherals, and emergency stop buttons.

additional handling fee: 50 EUR

Lot consisting of 1 used scan station in good condition. Shows moderate signs of use. Features: Includes Datalogic Matrix 210 barcode reader, Desktop unit, belt-driven, Control: PLC-controlled. Electrical: 230 V, 50 Hz, 2 A.

additional handling fee: 125 EUR

Lot consisting of 1 used automated test equipment setup. The unit is designed for voltage testing and data acquisition. Body shows minor wear with visible signs of use. Includes units such as Agilent E3641A and 34970A modules, integrated in the testing station housing. Specific accessories or documentation availability unknown.

additional handling fee: 25 EUR

Lot consisting of 3 units of used calipers, Fab. Holex. Optical condition shows general signs of use with visible minor scratches on surfaces, but all appear clean. Accessories and documentation: Each unit comes with a hard protective case. No additional documentation or accessories included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Digital Caliper, Fab. Holex, Model: 41 2805 150. The item shows minor visible wear including some light scratches but appears clean and well-maintained. Accessories and documentation: Includes original carrying case and product label affixed. Calibration label dates included.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply/load 32 V / 10 A in good condition. Device supports 24 A peak boost mode for up to 4 seconds. Features: Model 1136-x32, stabilized DC output with front and remote control, Boost mode, RS232/IEEE488 interface, 12-bit resolution. Electrical: 0–32 V, ±12 A (24 A peak), 50 Hz. Structur: 19-inch rack unit.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used Workbench with Drawer Cabinet. Fab. Make: Unknown, Model: Unknown. The workbench shows visible signs of use, including scratches and stains on the metal work surface. The steel base and drawer cabinet show wear consistent with frequent use, including minor scuff marks and discoloration. Features include a seven-drawer organization system with pull handles, integrated into the cabinet, and an additional steel accessory shelf under the table. Accessories and documentation: None.

additional handling fee: 125 EUR

Lot consisting of 1 unit of used table saw, Fab. Scheppach, Model: Precisa 6.0, 2013. The unit exhibits visible signs of wear, including minor scratches on the working surface and measuring guide. Equipment appears generally clean but shows signs of extended use around controls and adjustment handles. Accessories and documentation: Includes mounted dust extraction hose, measuring guides, and mounted extensions for larger workpieces. No further documentation is present.

additional handling fee: 25 EUR

Lot consisting of 1 programmable 4¾-digit digital multimeter HAMEG HM8012 (Rohde & Schwarz) with RS-232 interface. Measures V, A, Ω, dB, and °C (PT100). Max 600 VDC/VAC, 10 A, auto/manual range, offset, 0.05% accuracy. in Dual Mainframe HM 8001.

additional handling fee: 450 EUR

Lot consisting of 1 used temperature test chamber TSS1000/75 by RS-Simulatoren from 2001. Two-stage refrigeration system: R404A (6 kg) and R23 (3 kg), PC-based digital control, 3×400 V, 37 A. Run In 15, EM30123, CO₂-equivalent approx. 67.9 t.

additional handling fee: 50 EUR

Lot consisting of 1 used ESD proofen workstation including ZEBRA ZM400 printer. Made of aluminum profiles. Shows signs of use including scratches and slight wear. Included: monitor, keyboard, scanner. Cables are visibly connected. No additional documentation or accessories.

additional handling fee: 25 EUR

Lot consisting of 2 unused ballscrews with steel construction. Visually clean; no notable scratches or dents detected. Accessories are included in original packaging. Ballscrew Diameter: 15mm Ballscrew Lead: 16mm

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Oscilloscope, Fab. Tektronix, Model: TDS 3054. The item shows visible signs of use with wear on the exterior casing, minor scratches, and slight discoloration consistent with prior handling. Accessories and documentation: None included.

additional handling fee: 50 EUR

Lot consisting of 2 units ESD proofen workstations including a Simco AeroStat XC ionizing air blower, multiple monitors, control panels, and attached tools. The workstation is made of an aluminum frame combined with a composite worktop. The unit shows signs of use, including visible scratches and wear on surfaces. Condition is unchecked.

additional handling fee: 25 EUR

Lot consisting of 1 new dispenser system. Outer casing made of metal and plastic. Includes instruction manual and mounting hardware. Clean, sealed, and unused.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply high-current, programmable in good condition. Shows minor wear from handling. Features: 64 N 40 RU 100 P, K350A, 4800VA in, State 2, Programmable 40 V / 100 A power supply with rotary encoder, Interfaces: RS-232C, IEEE 488, analog input. Electrical: 230 V, 50/60 Hz, 2000 W.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used insect trap made of metal and plastic. Visibly includes signs of wear such as scratches and minor dents. Grating and housing show general wear from prior use. Accessories and documentation: none provided.

additional handling fee: 25 EUR

Lot consisting of 1 used function generator arbitrary, 2-channel in good condition. Shows moderate signs of use. Features: Desktop unit with numeric keypad and LCD display, 2 output channels with 50 Ohm impedance, Supports AM/FM modulation, Frequency range up to 16 MHz.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used tool storage cabinet made of steel. The cabinet features six drawers with handle grips, a black surface top, and four swiveling casters allowing mobility. Optical condition is used with visible signs of wear such as scratches and paint discoloration. Condition is unchecked. Accessories and documentation: None.

Inline and standalone test systems

additional handling fee: 25 EUR

Lot consisting of 1 used tape rewinding machine manual with counter in good condition. Minor paint wear on base plate. Features: Suitable for axial, radial and SMD taped components, Hand-crank operation with digital ZE 260 counter, Membrane interface for select/reset and up/down, Construction: desktop unit, coated steel with aluminum reels. Accessories: external power adapter.

additional handling fee: 50 EUR

Lot consisting of 1 soldering and rework station in used condition. Shows visible signs of usage, dust and wear on housing. Features: 3-channel configuration (soldering, hot air, desoldering), Display unit with menu interface, Integrated vacuum for desoldering. Electrical: 230 V, 1150 W, 5 A fuse.

additional handling fee: 25 EUR

Lot consisting of 1 used audio analyzer. Body shows minor signs of wear including scratches on chassis. No accessories or documentation included.

additional handling fee: 50 EUR

Lot consisting of 1 manual rework station with XY translation stage equipped with a Carton DSZ44 stereo microscope, JBC DI-2B control unit, JBC JT-2A hot air station, and JBC TE-2A soldering station. Table height electrically adjustable, 4 swivel castors. Condition appears used with minor visible wear and stains on the surface. Accessories and documentation: microscope and soldering tools included; no further documentation apparent.

additional handling fee: 50 EUR

Lot consisting of 1 used inspection station with integrated printer (CAB BP-PR600PLUS-P) and assembly tray. Constructed of metal and plastic components. Station includes a monitor, keyboard, and built-in wiring setup. Optical condition shows wear consistent with prior use such as surface scratches. Cables and wiring included. Missing any additional documentation.

additional handling fee: 50 EUR

Lot consisting of 1 used segmented conveyor with barcode scanner in good condition. Shows moderate signs of use. Features: 500 mm length, belt-driven segmented transport system, Integrated DATALOGIC MATRIX 210 barcode scanner. Electrical: 115–230 V, 60–50 Hz, 0.5 A, 0.1 kVA. Dimensions: 100 x x cm, 65 kg.

additional handling fee: 75 EUR

Lot consisting of 1 used conveyor system. Made of stainless steel, with visible wear and minor scratches. Includes visible motor components. Accessories limited to what is installed; documentation and additional accessories not included.

additional handling fee: 50 EUR

Lot consisting of 1 used segmented conveyor with barcode scanner in good condition. Shows moderate signs of use. Features: 500 mm length, belt-driven segmented transport system, Integrated DATALOGIC MATRIX 210 barcode scanner. Electrical: 115–230 V, 60–50 Hz, 0.5 A, 0.1 kVA. Dimensions: 100 x x cm, 65 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used oxygen analyzer. Stainless steel construction with visible surface wear and minor scratches. Includes all visible components; no additional accessories or documentation provided. Functional status untested.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 30 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 30 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Multi-pin power and signal interface integrated. Compatible with Panasonic NPM-W series.

additional handling fee: 350 EUR

Lot consisting of 1 used industrial robot 6-axis in very good condition. Features: Articulated arm with desktop layout, FANUC R-30iB Mate controller and i Pendant included, Performance: 6-axis, 27 kg payload, 911 mm reach. Electrical: 200–230 V, 50/60 Hz, 1PH, 1.2 kVA.

additional handling fee: 1.375 EUR

Lot consisting of 1 used screen printer with spot cooler in good condition. Shows signs of use and handling. Features: stencil-based printing, enclosed cabinet design. Electrical: 230 V, 50/60 Hz, 3.5 kVA, 6.4 A. Performance: max load 15 A, 2 kW cooling, IP64. Weight: 2200 kg.- Note unit faulty, possibly with parts missing

additional handling fee: to be announcend

Lot consisting of 2 wooden Cabinets, Double doors, 95x42x194. No content included.

additional handling fee: 175 EUR

Lot consisting of 1 used conveyor. Metal housing with minor scratches and general signs of use. Includes control panel. Missing additional documentation or accessories.

additional handling fee: 1.450 EUR

Lot consisting of 1 unit of used X-Ray inspection system made by Viscom, model X7056RS, manufactured in 2010. The system is in used condition with visible signs of wear such as handling marks and minor surface scratches. Accessories and documentation: Includes power cables, operating manuals, and documentation as pictured.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer thermal transfer in good condition. Shows minor signs of previous use. Features: Display + keypad control panel, Label width up to 104 mm, Part Number: ZM400-300E-5100T. Electrical: 100–240 V, 47–63 Hz, 0.3 A. Weight: 4.7 kg.

additional handling fee: 350 EUR

Lot consisting of 1 used test and labeling station inline, dual-nest in very good condition. Features: AST10 controller, CAB A4+/300P label printer, KEYENCE CV-200C vision system. Dual pneumatic test nests, FESTO valve terminal. Electrical: 115/230 V, 50–60 Hz, 250 W.

additional handling fee: 25 EUR

Lot consisting of 1 unit of a adjustment jig.Material: glass and associated components. Optical condition: clean and appears unused. Includes original packaging; no additional accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 used network interface 2-channel USB interface in good condition. Shows signs of prior use. Features: Interface: USB, 2x D-Sub9 CAN, Sync port, Exchangeable CAN transceivers, Compatible with Vector tools (CANalyzer, CANoe, etc.)

additional handling fee: 25 EUR

Lot consisting of 1 used vacuum cleaner. Made of durable plastic in blue and black. Optical condition shows use; minor abrasions and wear. Hose is included. Accessories or additional documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used calibration set for machining applications. Components include several precision tools in foam holders, diskette storage with software programs, and detailed calibration instructions. Aluminum case included. Optical condition shows visible wear but is generally clean; some scratches are noted on external case. All components appear complete and include foam inserts and labeling for organization.

additional handling fee: 25 EUR

Lot consisting of 1 motor in unopened condition. Packaging displays minor wear consistent with storage. Includes original box; accessories or documentation not mentioned.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Video Pattern Generator, Fab. Fluke, Model: PM5414V. The device shows mild surface scratches and general usage marks, but no significant dents or other visible damages. Front panel includes control buttons and rotary dials, along with input and output connections. Rear panel includes multiple connection ports and a power input. Accessories and documentation: None included.

additional handling fee: 125 EUR

Lot consisting of 1 used dispensing cell with enclosing aluminum frame. Equipped with a bdtronic B1000 dispensing system and Sartorius scale (ISO68BE-SCOE). Optical condition appears clean with no major visible surface defects. Accessories include documentation folders and two labeled binders. Maintenance history unknown.

additional handling fee: 450 EUR

Lot consisting of 1 used temperature test chamber TS-70/1000-10 in used condition. System with R404A (7.5 kg) and R23 (3 kg), currently marked as 'Kältemittel abgesaugt'. Features: Two-stage refrigeration, touchscreen interface, PC workstation. Electrical: 400 V, 50 Hz, 40 A, 23.1 kW. EM30123 (Run In 15), maintained 1× per year.

additional handling fee: 75 EUR

Lot consisting of 1 used tray feeder unit in good condition. Shows moderate signs of wear from handling. Features: Mobile structure with caster feet, maintenance-friendly design with labeled manifold layout. Electrical: 200 V ±5%, 150 VA. Weight: 200 kg.

additional handling fee: 25 EUR

Lot consisting of 4 units of used vacuum cleaners. Made of plastic and metal. Optical condition shows visible scratches and signs of wear. Accessories and documentation: Includes attached hoses and metallic baseplates.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Chassis, Fab. National Instruments, Model: PXIe-1082, 2014. The chassis case shows some visible wear, including scuffs and minor scratches, consistent with prior use. Accessories and documentation: Includes one cable and various manuals, including IEEE-488.2 and system setup guides.

additional handling fee: 25 EUR

Lot consisting of 4 units of used calipers, Fab. Holex. Visible signs of use include minor scratches. Optical condition appears clean and well-maintained. Accessories and documentation: Each caliper is supplied in its original plastic case.

additional handling fee: 50 EUR

Lot consisting of 1 used conveyor system. Made of metal, showing minor wear consistent with prior use, including light scratches and oxidation. Accessories or documentation are not included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Graphical Multimeter. The multimeter shows visible signs of wear, including minor surface scratches on the casing and screen. Accessories and documentation: Includes a power adapter; no additional accessories or documentation visible.

additional handling fee: 50 EUR

Lot consisting of 1 used conveyor inspection machine. Made of metal. Optical condition shows minor scratches and signs of use. No additional accessories or documentation included.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB handling conveyor. Stainless steel construction. Optical condition: scratches, minor signs of wear. Includes attached wiring and connections; no additional accessories or documentation included.

additional handling fee: 450 EUR

Lot consisting of 1 used temperature test chamber TSS1000/7555K in used condition. Visible signs of use and ageing present. Features: Retrofit to R449A (6 kg) and R23 (3 kg), Control unit with membrane keyboard and RS232 interface. Electrical: 3×400 V, 38 A. EM30129 (Run In 21), maintained 1× per year.

additional handling fee: 25 EUR

Lot consisting of 2 units of used Power Supply, Fab. Oltronix, Model: B32-30R. The units show visible signs of wear, with scratches and discoloration on the casing. Optical condition includes functional rotary knobs, sockets, and switches, though no functionality tests are performed. Accessories and documentation: None included.

additional handling fee: 25 EUR

Lot consisting of 1 quantity of used clamps in fair condition. Approx. 25pcs. Includes steel and plastic materials, with visible signs of use such as minor scratches. Handles appear intact, and clamping components are functional. No accessories or documentation are included.

additional handling fee: 50 EUR

Lot consisting of 1 modular dual workstation setup with IT equipment and signal lights in good condition.

additional handling fee: 50 EUR

Lot consisting of 1 unit modular assembly workstation by Desoutter, model EASY 60-SE made of aluminum frame with integrated components. Visible signs of wear including minor scratches and some discoloration on parts. Condition is unchecked. Accessories and documentation: Includes integrated control units, Posco 500 control panel, CVIC H-2 motor controller, assembly tool, and various pneumatic components. Includes hopper for screws or small parts.

additional handling fee: 25 EUR

Lot consisting of 2 used light panels. Made of plastic and metal. Minor signs of wear, minimal surface scratches. Includes power supply cables and original packaging, with some wear.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used inspection machine. Made of steel and aluminum, the machine shows visible signs of use such as scratches, dirt, and minor wear. Condition is unchecked. Accessories and documentation: not included.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used refrigerator made of stainless steel. Optical condition shows visible scratches and signs of use. The interior is clean with no visible dents or damages. Accessories and documentation: None included.

additional handling fee: 75 EUR

Lot consisting of 1 automated PCB magazine loader by RG ELEKTROTECHNOLOGIE, model LPE-3M. Optical condition appears clean with minor signs of use. Includes built-in control panel with touchscreen interface. Documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used network interface 2-channel USB interface in good condition. Shows signs of prior use. Features: Interface: USB, 2x D-Sub9 CAN, Sync port, Exchangeable CAN transceivers, Compatible with Vector tools (CANalyzer, CANoe, etc.)

additional handling fee: 25 EUR

Lot consisting of 2 units of used calibrated weights. Optical condition shows clean weights with minor visible wear and polished finishes. Includes a red wooden storage box with minor surface wear, foam interior for protection, and a secure latch. Accessories and documentation: No accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 2 units of used Stationary Screwfeeder with Integrated Control Unit, DEPRAG Type 1811-1,5-1 made of metal. Units show signs of previous usage such as minor scratches and general wear. Optical condition is consistent with industrial usage, with no major visual damage. Condition is unchecked.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply dual-channel, programmable in good condition. Shows minor wear from handling. Features: 62 N 52 RU 50 P, State 2, Output: 0-52 V DC, max 50A, Dual-channel programmable power supply with rotary encoder, Interfaces: RS-232C, IEEE 488. Electrical: 230 V, 50/60 Hz, 1800 VA.

additional handling fee: 25 EUR

Lot consisting of 6 units of used Sensor Testers, Fab. Contrinex, IPF Electronic, Di-Soric. Optical condition: Items show visible signs of wear, including minor scratches and marks. Accessories and documentation: Includes attached cables as seen in the images. No additional documentation available.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply programmable in good condition. Shows minor signs of use and handling. Features: Interface: RS-232/RS-485, remote programming, DIP-switch configuration, Digital front control, rackmount design. Electrical: 85–265 V, 47–63 Hz, 1520 W. Dimensions: 43.3 x 42.3 x 4.4 cm, 8.5 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer 300 dpi peel-off in good condition. Shows moderate signs of use such as scratches. Features: Print width: 104.1 mm, Print speed: up to 300 mm/s, Print Head Firmware: 2.1.0, Interfaces: USB, Ethernet, RS232, Parallel, 4x USB Host, SD card slot (max. 512 GB). Electrical: 100–240 V, 50–60 Hz, 2 A max. Dimensions: 46 x 25.2 x 28.8 cm, 10 kg.

Automated and manual packaging equipment

additional handling fee: 50 EUR

Lot consisting of 1 metal storage cabinet in used condition. Cabinet features visible scratches and wear. Includes stocked contents of screws and hardware in various box sizes and specifications. Missing locks and keys, if applicable.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply programmable in good condition. Shows moderate signs of use. Features: Output range: 0–1000 VDC, 0–15 A, programmable, Rackmount 3U format, 19-inch compatible, Interfaces: LAN, RS232, RS485, isolated analog, remote control, OVP, foldback, remote sense. Electrical: 400 V, 50–60 Hz, 32 A, 3-phase. Dimensions: 48.3 x 44.5 x 13.3 cm, 12 kg.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Cable Assembly. Various cables and connectors of different types and lengths are included. Visible light wear, such as markings and minor scratches, consistent with use. Some cables are multi-colored and terminated with connectors, including DB connectors, banana plugs, XLR connectors, and test probes. Accessories and documentation: None included.

additional handling fee: 75 EUR

Lot consisting of 1 used shuttle conveyor unit in good condition. Constructed with a steel body and glass-covered work area. The surface shows minor wear consistent with regular use. No additional accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 locked tool storage cart. Made of metal and plastic materials. Shows signs of use, including scratches and some surface wear. Key is missing and cart is not accessible. No accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Data logger, Fab. Ahlborn, Model: ALMEMO MA5690-1. The item shows minor wear, including visible scuffs and marks consistent with prior handling or use. Clean overall appearance. Accessories and documentation: none visible.

additional handling fee: 25 EUR

Lot consisting of 1 used rotary tool, Fab. Dremel, Model: 4000, Year: 2012. The unit shows signs of wear with visible scratches and minor scuffs on the tool housing and case. Accessories and documentation: Includes a variety of attachments and accessories stored in the accompanying hard case, such as sanding discs, polishing pads, cutting wheels, and drill bits. Documentation (instruction manual) present.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used segmented conveyor JOT Automation J204-50. Made of metal, showing visible surface wear including minor scratches and scuffs. General optical state appears clean.

additional handling fee: 40 EUR

Lot consisting of 4 used single rowed gang change type feeder cart with 27 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 27 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Harting multipin connector power and signal interface integrated. Compatible with Panasonic CM402, CM602, CM401, DT401, CM202, and CM88 series machines.

additional handling fee: 150 EUR

Lot consisting of 1 used rework station. Includes steel components. Optical condition reveals signs of normal wear; clean surfaces. Includes integrated keyboard and display. Missing: n.a.

additional handling fee: 25 EUR

Lot consisting of 1 used interface module 4-channel CAN/LIN in very good condition. Features: USB to CAN/LIN communication interface, 4-channel design with J1708 support, Connectors: USB, DB9, 8-pin, and round multi-pin ports, Desktop unit housing with aluminium casing.

additional handling fee: 325 EUR

Lot consisting of 1 well-maintained assembly line system. The setup incorporates an aluminum profile frame, a CAB A4+ 300P industrial label printer, NTN 300 SL press, CVIC control unit, and supporting accessories. System shows minor wear consistent with industrial use. No documentation included. Additional components detailed below.

additional handling fee: 25 EUR

Lot consisting of 1 used oscilloscope. Plastic casing shows signs of wear, minor scratches and staining. Functional condition unverified. No accessories, probes, or manuals included.

additional handling fee: 25 EUR

Lot consisting of 1 used Impuls-Schweißmaschine (sealing machine) made of stainless steel and other materials. Condition shows typical wear from use, including some surface scratches. Missing or additional accessories not provided.

additional handling fee: 1.375 EUR

Lot consisting of 1 used screen printer with spot cooler in good condition. Shows signs of use and handling. Features: Includes Space Breeze TCU30/561 Spot Cooler, stencil-based printing, enclosed cabinet design, user manual and installation CD included. Electrical: 230 V, 50/60 Hz, 3.5 kVA, 6.4 A. Performance: max load 15 A, 2 kW cooling, IP64. Weight: 2200 kg.

additional handling fee: 225 EUR

Lot consisting of 1 unit of used Solder Paste Inspector made of steel and plastic components. Optical condition: clean with visible minimal wear. Includes a connected monitor, keyboard, mouse, and user manual.

additional handling fee: 225 EUR

Lot consisting of 1 functional test cell used for circuit testing, constructed with metal and featuring a clean condition with minor surface wear. Includes accessories such as control panel, connectors, and documentation.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used soldering station made of plastic and metal. The station shows noticeable wear with visible scratches and signs of use. Condition unchecked. Includes a separate cleaning station labeled 'ELVO' with visible wear and attached power cables. Accessories and documentation: none detected.

additional handling fee: 50 EUR

Lot consisting of 5 used wire cage shelving unit with aluminum frame components. Optical condition: clean, light scratches on surfaces and minor wear on blue protective matting inside shelves. Includes lockable doors and casters for mobility; no accessories or manuals included.

additional handling fee: 25 EUR

Lot consisting of 1 used electrical control cabinet. Includes modular units with SIEMENS PLC components, INFRANOR servo drive, and SICK sensor modules. Outer casing shows some superficial wear, normal for prior use. Accessory documentation or manuals missing.

additional handling fee: 1.250 EUR

Lot consisting of 1 used wave soldering system showing some signs of wear such as scratches and discoloration. Constructed mainly of metal. Includes operation manual but lacks additional accessories or consumables.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used stereomicroscope made of plastic and metal. The exterior shows minor wear like surface marks and scratches consistent with previous use. Condition is unchecked and untested for functionality. Includes stand and integrated cables but no additional accessories or documentation.

additional handling fee: 25 EUR

Lot consisting of 4 unused dispensers for grease. Each unit includes metal dispensing components and hoses stored in a foam-fitted case. Both units appear clean with no visible signs of damage. Includes original packaging and documentation.

additional handling fee: 125 EUR

Lot consisting of 1 set of 2 units of conveyors in unchecked condition, manufactured by Rommel. Models include BM 500-2 S and BM 500-3 S, with integrated stacker unit. Structural components are primarily made of aluminum and steel. Optical condition shows some minor scratches and signs of prior use. Accessories and documentation: None noted.

additional handling fee: 25 EUR

Lot consisting of 1 used video pattern generator. Metal casing; light scratches are present. Includes power cable. Missing additional accessories or documentation.

additional handling fee: 25 EUR

Lot consisting of 4 units of used calipers, Fab. Holex. Optical condition: Shows minor visible signs of use, including light surface scratches. Stored in branded protective cases with foam inlays. Accessories and documentation: Includes 4 original Holex protective cases.

additional handling fee: 75 EUR

Lot consisting of 1 automated PCB magazine loader by RG ELEKTROTECHNOLOGIE, model LPE-3M. Optical condition appears clean with minor signs of use. Includes built-in control panel with touchscreen interface. Documentation not included.

additional handling fee: 225 EUR

Lot consisting of 1 used PCB loader magazine-type in good condition. Shows moderate signs of use with scratches on the housing. Features: PLC-controlled operation. Electrical: 230 V, 50/60 Hz, 400 VA. Pneumatic: 6–8 bar, 80 l/min.

additional handling fee: 50 EUR

Lot consisting of 1 used AOI workstation in good condition. Shows minor wear from handling. Features: Dual Datalogic CBX100 interface boxes, Datalogic Matrix 2000 barcode reader with LED status panel, Integrated conveyor belt with emergency stop, Dell monitors, keyboard and mouse included.

additional handling fee: 25 EUR

Lot consisting of 5 used handheld barcode scanners. The exterior shows visible wear and surface scratches consistent with previous usage. No accessories, documentation, or additional equipment included. Untested functionality.

additional handling fee: 25 EUR

Lot consisting of 1 used screw feeding unit electric-pneumatic in very good condition. Features: PLC-controlled unit with integrated pneumatic actuator, Front feed mechanism with mounting interface. Electrical: 24 V, 10 VA.

additional handling fee: 25 EUR

Lot consisting of 1 wireless temperature monitoring and logging system by ebro (Xylem Analytics), including EBI 10-System with interface unit EBI IF 100, and stainless steel temperature logger EBI 12T (max. +150°C). Set includes mounting clamp, plastic container, and original packaging. Optical condition: very good. Suitable for thermal process control in laboratory and industrial environments.

additional handling fee: 475 EUR

Lot consisting of 1 unit of used condition cleaning system made of stainless steel. The machine shows visible signs of wear, including minor scratches and discoloration, but appears overall clean and structurally intact. Accessories and documentation: Includes operator manuals and additional accessories as shown, such as a hand scanner.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Control Unit, Fab. Schaefer, Model: Original Arkograf. The unit shows minor signs of wear, including superficial scratches but is generally clean. Enclosed in a wooden box with a clasp, marked with a label reading 'Elektroschreiber'. Accessories and documentation: Includes attached power cable, several input/output cables, tools, and paperwork stored inside the box.

additional handling fee: 50 EUR

Lot consisting of 1 used modular workbench with upper shelf frame in very good condition. Designed for industrial or technical workstations. Features: Aluminum profile frame with reinforced structure, Upper rack with 3 support rails for storage or tool attachment, Galvanized sheet steel tabletop, Floor-standing with under-table storage space.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB Segmented Conveyor, 500mm compact in good condition. Shows minor signs of use. Features: Compact benchtop housing with button control. Electrical: 220–240 V, 50–60 Hz, 1 A.

additional handling fee: 350 EUR

Lot consisting of 1 used industrial robot 6-axis in very good condition. Features: Articulated arm, floor-mounted design, Teach pendant included, Controller: FANUC R-30iB Mate, Performance: 6 axes, 12 kg payload, 2009 mm reach. Electrical: 200–230 V, 50/60 Hz, 3-phase, 3.0 kVA. Weight: 250 kg (robot) + 40 kg (controller).

additional handling fee: 1.150 EUR

Lot consisting of 1 pre-owned thermal processing system in operational condition. Made of durable materials for industrial use. The system shows minor signs of wear consistent with use, including slight surface scratches. Included are documentation folders, operating manuals, setup instructions, and software on CD.

additional handling fee: 25 EUR

Lot consisting of 2 units of used heating plates (SMD Heating Plate by Ersa, Model HP 100) made of metal. Both units display visible signs of use, such as minor scratches and wear consistent with handling. Includes a detachable power cord with one unit. Condition is unchecked.

additional handling fee: 50 EUR

Lot consisting of 1 used automated workstation. Key components include a DEPRAG pneumatic unit, CAB label printer (model A4+/300P, serial no. 0071499_T02), and other unspecified process equipment. Stainless steel and aluminum construction. Visible wear and scratches consistent with industrial use. Includes monitors, fixtures, and pneumatic/electronic components, but may lack specific accessories or manuals.

additional handling fee: 50 EUR

Lot consisting of 1 unit(s) of used Sealing Machine, Fab. GEHO, Model: TM 900 D, 2016. Optical condition shows slight visible scratches on the casing, otherwise clean. Accessories and documentation: power cable attached, no further documentation or accessories visible.

additional handling fee: 25 EUR

Lot consisting of 1 used gas analyzer. Aluminum casing with optical wear (minor scratches and slight discoloration). Includes detachable handle and power input cable. No additional accessories or documentation provided.

additional handling fee: 25 EUR

Lot consisting of 1 black calibration plate in clean condition with light signs of usage; includes gray value reference tiles and a labeled storage box. Accompanying documentation included. Optical condition: visible stickers; minor wear.

additional handling fee: 75 EUR

Lot consisting of 1 used FIFO buffer in very good condition. Shows minimal signs of use. Features: Vertical stack with enclosed housing, freestanding setup, Integrated touchscreen control and FIFO logic. Electrical: 220–240 V, 50 Hz, 3 A, 0.7 kVA. Pneumatic: 6 bar, 3 l/min, pneumatic actuator. Weight: 250 kg.

additional handling fee: 175 EUR

Lot consisting of 1 operational magazine loader. Painted steel construction, visible wear including scratches on the surface. Control panel includes touchscreen and emergency stop button. Accessories or manuals not included.

additional handling fee: 25 EUR

Lot consisting of 2 units of used thermometer, Fab. Micro-Epsilon, Model: CT-SF15-C3. The devices are visibly clean and show no significant optical damages or scratches. Accessories and documentation: includes cables, calibration certificates, manuals, and original packaging for both units.

additional handling fee: 25 EUR

Lot consisting of 1 set of standard calibration jig kit in a clean and well-maintained condition. The equipment is housed within a robust protective carrying case lined with foam. Includes various compartments accommodating batteries and components for operation. No visible damage to the case or internal items. Accessories included: test components, batteries, holder components. Documentation/manual visible but verification required.

additional handling fee: 25 EUR

Lot consisting of 1 unit of a used modular workstation made of aluminium. The unit includes a workbench surface with visible wear such as light scratches and marks. The workstation features shelves and a suspended green balancer, along with two mounted computer monitors, a keyboard, and a mouse. Condition is unchecked. Accessories and documentation: Not included.

additional handling fee: 50 EUR

Lot consisting of 1 used ESD-protected workbench. Made of a metal frame and composite work surface. Optical condition includes visible wear, surface marks, and scratches. Integrated power strip present. Accessories and documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used depaneling machine manual-feed in good condition. Shows moderate signs of use. With test bench including Matrix 2000 scanner, Simco Aerostat XC ionising air blower and overhead light L1220mm x W950mm x H2140mm

additional handling fee: 50 EUR

Lot consisting of 1 unit of used device made of metal with visible signs of use including a clean surface and some visible scratches. Condition is unchecked. Accessories and documentation: multiple visible cables are included; no additional documentation observed.

additional handling fee: 25 EUR

Lot consisting of 1 used microscope. Made of metal and plastic. Optically in clean condition with minor wear, no visible scratches or dents. Includes adjustable stand with horizontal and vertical positioning and dual 10x/23.0 eyepieces. Other accessories or documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 unit of manual press, condition marked by visible signs of prior use, including minor surface scratches and wear on the metal construction. The press is a manually operated device made predominantly of metal, with a handle on the top for operation. Condition is unchecked.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB Segmented Conveyor, 500mm compact in good condition. Shows minor signs of use. Features: Compact benchtop housing with button control. Electrical: 220–240 V, 50–60 Hz, 1 A.

additional handling fee: 25 EUR

Lot consisting of 3 units of used clamping vises. Fab. Optimum, Model: MSO 100. Optical condition: visible signs of wear such as scratches and use marks. Some minimal corrosion on the metallic surfaces of the vises. Accessories and documentation: none included.

additional handling fee: 50 EUR

Lot consisting of 1 unit of a used vacuum packaging machine made of stainless steel. The unit shows signs of prior use, including some visible surface scratches and minor dents typical of operational wear. The machine's exterior is clean overall, and a glass lid is present. Condition is unchecked. Includes no additional accessories or documentation.

additional handling fee: 25 EUR

Lot consisting of 1 used stamp labeler. Made of metal, with moderate surface scratches. Includes partially wired cables and mounting component. Accessories or documentation are not included.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply 60 V / 60 A in very good condition. Minor cosmetic wear only. Features: Model SYSKON P1500-060-060, output: 60 V / 60 A, Analog interface, RS232, IEEE488 remote control. Electrical: 230 V, 50/60 Hz, 2200 VA. Structur: 19-inch rack housing.

additional handling fee: 75 EUR

Lot consisting of 1 used steelsheet cabinet with double winged doors. Clean exterior with visible operational wear. Includes assorted hardware, tools, and accessories as shown.

additional handling fee: 50 EUR

Lot consisting of 1 used chromatic confocal sensor desktop unit in good condition. Shows minor wear on casing and front panel. Features: Keypad interface, desktop housing, sensor port, Werth OEM label. Electrical: 24 V DC.

additional handling fee: 50 EUR

Lot consisting of 1 used conveyor. Stainless steel construction. Clean with some minor signs of wear. No included accessories or additional documentation.

additional handling fee: 25 EUR

Lot consisting of 1 used Burster DIGIFORCE 9310 force-displacement monitoring system, model 9310-V000, serial no. 298863. Equipped with integrated graphical display, PROFIBUS and RS485 communication ports, and PLC interface. Designed for precision process control in assembly and joining tasks. Visual condition: clean, display powers on. Functional test not performed.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used steel cabinet. A tall unit with a clean optical condition, showing minor visible signs of use such as light scratches. The cabinet is equipped with two doors and multiple internal shelves. Condition is unchecked.

additional handling fee: 50 EUR

Lot consisting of 1 used industrial workstation with integrated CAB SQUIX label printer. Metal structure shows minimal wear; clean surface, some cable connections visible. No additional accessories or documentation included.

additional handling fee: 75 EUR

Lot consisting of 1 unit of used Bandsaw, Fab. Bauer, Model: BSS 016, 2003. The machine shows visible signs of use, including surface wear, light rust on the base, and scratches primarily on the table and housing. Dust and processing residues are visible on the table and surrounding parts. Condition is unchecked. Accessories and documentation: none included.

additional handling fee: 25 EUR

Lot consisting of 1 automotive test controller GOEPEL basicCAN 61 PLUS in good condition. Interfaces: 2–4× CAN/CAN-FD, optional LIN, K-Line, FlexRay, SENT. Connections: USB, Ethernet, 4× D-Sub IO, KL30/KL15/KL31 terminals. Power: external 7–25 VDC.

additional handling fee: 50 EUR

Lot consisting of 1 used industrial conveyor. Structure appears to be made of steel and aluminum. In good optical condition with minor surface scratches and signs of wear. Includes red and yellow attachment cables. No additional documentation or accessories are included.

additional handling fee: 25 EUR

Lot consisting of 1 unused BlowVac made of plastic and metal components. Appears clean with no visible scratches or dents. Includes hose attachment, power cable, and documentation. No additional accessories are visible in the provided images.

additional handling fee: 25 EUR

Lot consisting of 1 used audio analyzer 8-channel in good condition. Shows minor wear from handling. Features: Interface: AES/SPDIF, USB, AUX control, PC, optical/digital I/O, THD+N < –107 dB, 5 Hz–80.1 kHz range, 14.4 Vrms max output. Electrical: 100–240 V, 50–60 Hz, 1PH.

additional handling fee: 25 EUR

Lot consisting of 1 pre-owned Data Storage unit. Material: Mixed electronic components. Optical condition: Clean with no visible damage. Accessories or documentation are not included.

additional handling fee: 1.150 EUR

Lot consisting of 1 used thermal system. Manufactured in Germany. Optical condition: clean, some minor signs of wear consistent with industrial use. Includes attached display and keyboard. Accessories or documentation not mentioned.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 30 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 30 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Multi-pin power and signal interface integrated. Compatible with Panasonic NPM-W series.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Clamp Meter, Fab. Benning, Model: CC-3. The clamp meter shows visible wear with minor scratches on the surface and is otherwise clean. Accessories and documentation: Comes with coiled measurement leads and a carrying pouch, no additional documentation noted.

additional handling fee: 25 EUR

Lot consisting of 1 used ytterbium fiber laser system. Outer casing made of metal. Optical condition clean with minor wear. No additional accessories or documentation provided unless visible in photos.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply 0–32 V, 0–10 A in good condition. Shows signs of moderate wear and scratches from use. Features: Sub-D interface, standby switch, overvoltage protection, Manual control with coarse/fine regulation. Electrical: 115/230 V, 50/60 Hz, 6/3 A.

additional handling fee: 25 EUR

Lot consisting of 2 used power supplies 3-channel in good condition. Shows moderate signs of use. Features: Triple output, bench unit, Interface: LEMO connectors, ±12V ±2.25A. Electrical: 100–240 V, 50/60 Hz, 130 VA.

additional handling fee: 50 EUR

Lot consisting of 1 used drawer cabinet 12-drawer, industrial storage in good condition. Shows moderate signs of use. Features: Sheet steel housing, 12 labeled drawers with stock level indicators. Dimensions: 148 x 50 x 100 cm.

additional handling fee: 25 EUR

Lot consisting of 1 used power distribution unit 8-output, PC-configurable in good condition. Shows moderate signs of use. Features: Emergency stop, main rotary switch, 8 power outputs including PC-only and delayed outputs, repair socket and PC communication interfaces, remote control and status output terminals. Electrical: 230 V, 50 Hz, 3600 W, 16 A.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used press made of metal. Optical condition shows signs of wear, including a missing handle and potential surface scratches visible on the unit. Condition is unchecked and sold as is. Accessories and documentation: none included. NOTE: Lever is missing!

additional handling fee: 1.375 EUR

Lot consisting of 1 used screen printer with spot cooler in good condition. Shows signs of use and handling. Features: stencil-based printing, enclosed cabinet design. Electrical: 230 V, 50/60 Hz, 3.5 kVA, 6.4 A. Performance: max load 15 A, 2 kW cooling, IP64. Weight: 2200 kg.

additional handling fee: 225 EUR

Lot consisting of 1 set of 2 used infrared heating units. Units feature steel housing with clear signs of wear including minor scratches and scuffs. No accessories or documentation included. Functional status untested.

additional handling fee: 50 EUR

Lot consisting of 1 used scan station in good condition. Shows moderate signs of use. Features: Includes Datalogic Matrix 210 barcode reader, Desktop unit, belt-driven, Control: PLC-controlled. Electrical: 230 V, 50 Hz, 2 A.

additional handling fee: 25 EUR

Lot consisting of 1 unused/replacement receptacle for high-voltage applications made of polymer material. Optical condition is clean with no visible scratches or dents. Original packaging included. Missing other accessories or documentation.

additional handling fee: 1.450 EUR

Lot consisting of 1 used AOI system dual-track with 3D inspection in good condition. Features: Enclosed cabinet, pneumatic PCB clamping. Electrical: 230/400 V, 50–60 Hz, 2.5 kW. Pneumatic: 4–6 bar. Dimensions: 152.8 x 165.0 x 169.2 cm, 1550 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used industrial robot 6-axis in very good condition. Features: Articulated arm with desktop layout, FANUC R-30iB Mate controller and i Pendant included, Performance: 6-axis, 27 kg payload, 911 mm reach. Electrical: 200–230 V, 50/60 Hz, 1PH, 1.2 kVA.

additional handling fee: 25 EUR

Lot consisting of 1 used digital oscilloscope Tektronix TDS3012B in very good condition. Fully functional with 2 channels and 100 MHz bandwidth. Sampling rate: 1.25 GS/s, 10,000 pts memory per channel. 6.5" LCD display, floppy drive. Optional interfaces: GPIB, RS232, LAN, VGA. Power: 90–250 V AC, 47–440 Hz, 75 W.

Measurement, inspection, and calibration tools

additional handling fee: 175 EUR

Lot consisting of 1 used in-circuit tester 19-inch in good condition. Shows minor wear from operation and handling. Features: Modular electric test fixture, Interface: manual + emergency switch, visual test chamber. Electrical: 3×400 V, 50/60 Hz, 500 VA.

additional handling fee: 500 EUR

Lot consisting of 1 quantity of assorted industrial aluminum profiles, tubes, and shelving in used condition. Material predominantly aluminum. Some items show signs of wear and storage dirt. Includes a variety of profiles, pieces, and hardware. Documentation and additional accessories are not included.

additional handling fee: 25 EUR

Lot consisting of 1 used ESD solution suction and filter unit by KIST + ESCHERICH, model ES41ESD-0XX-230V. Sale includes tubing and control box with switches.Optical condition shows clean exterior with minor wear such as visible scratches. Condition is unchecked. Accessories and documentation: None visible.

additional handling fee: 75 EUR

Lot consisting of 1 used exhaust extraction unit. Made of metal and plastic materials. Optical condition shows usage marks with visible minor scratches and dirt. Accessories or documentation not included. Unit not tested for functionality.

additional handling fee: 50 EUR

Lot consisting of 1 used electric screwdriving system in good condition. Integrated on a mobile worktable with torque arm and controller unit. Features: Chicago Pneumatic screwdriver with Desoutter D50 arm, Torque controller: CP Posco 500, display and OK/NOK interface, Rolling table with aluminum frame and synthetic worktop, Max arm load: 1 kg, mobile design.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 27 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 27 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Harting multipin connector power and signal interface integrated. Compatible with Panasonic CM402, CM602, CM401, DT401, CM202, and CM88 series machines.

additional handling fee: 25 EUR

Lot consisting of 1 used electronic control unit. Made of metal casing with visible scratches and minor wear. Includes various input/output ports, cooling fan, built-in keypad and display. Some cables are included; additional accessories and documentation are not present.

additional handling fee: 1.150 EUR

Lot consisting of 1 used reflow soldering system. Made of steel with visible usage marks such as minor scratches and wear. Documentation included. Dimensions and other accessories not specified.

additional handling fee: 50 EUR

Lot consisting of 1 used metal storage cabinet. Shows signs of prior use, including some scratches and scuffs. Contents include various small storage bins, tools, hardware components, and miscellaneous items. Accessories or documentation not confirmed.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB conveyor with pusher in used condition. Shows signs of use and surface wear. Features: Enclosed belt-driven conveyor for PCB handling, Pneumatic pusher unit, mobile setup. Electrical: 230 V, 1PH. Pneumatic: 4–6 bar, pneumatic actuator. Weight: 80 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used mobile air conditioner. Made of plastic. Optical condition shows surface scratches and mild discoloration from use. Accessories and documentation are not included.

additional handling fee: 25 EUR

Lot consisting of 4 used ionizing air blowers bench model in good condition. Shows moderate signs of use. Features: Manual control, desktop unit, Heater 350 W, CE/UL certified. Electrical: 230 V, 50 Hz, 350 W, 1.8 A.

additional handling fee: 2.375 EUR

Lot consisting of 1 used inline router. Metal housing with glass panels. Optical condition: clean and well-preserved with minor handling marks

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply/load 32 V / 10 A in good condition. Device supports 24 A peak boost mode for up to 4 seconds. Features: Model 1136-x32, stabilized DC output with front and remote control, Boost mode, RS232/IEEE488 interface, 12-bit resolution. Electrical: 0–32 V, ±12 A (24 A peak), 50 Hz. Structur: 19-inch rack unit.

additional handling fee: 25 EUR

Lot consisting of 1 unit(s) of used handheld vacuum made of plastic. The item shows visible scratches and marks on its surface consistent with wear. Accessories and documentation: includes vacuum hose and power cable.

additional handling fee: 1.150 EUR

Lot consisting of 1 unit of used reflow oven made of metal. The exterior shows visible signs of wear consistent with use, including minor scratches and scuffs. Condition is unchecked. Accessories and documentation: None provided.

additional handling fee: 25 EUR

Lot consisting of 1 used power supply unit. Constructed of metal housing. Optical condition shows light surface scratches on the exterior. No additional accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply programmable in good condition. Shows minor signs of use and handling. Features: Interface: RS-232/RS-485, remote programming, DIP-switch configuration, Digital front control, rackmount design. Electrical: 85–265 V, 47–63 Hz, 1520 W. Dimensions: 43.3 x 42.3 x 4.4 cm, 8.5 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply programmable in good condition. Shows minor signs of use and handling. Features: Interface: RS-232/RS-485, remote programming, DIP-switch configuration, Digital front control, rackmount design. Electrical: 85–265 V, 47–63 Hz, 1520 W. Dimensions: 43.3 x 42.3 x 4.4 cm, 8.5 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used drawer cabinets made of metal. Clean and show minor signs of wear. Drawers are labeled and organized with FESTO pneumatic components, including cylinders, valves, and related accessories.

additional handling fee: 1.375 EUR

Lot consisting of 1 used screen printer with spot cooler in good condition. Shows signs of use and handling. Features: stencil-based printing, enclosed cabinet design. Electrical: 230 V, 50/60 Hz, 3.5 kVA, 6.4 A. Performance: max load 15 A, 2 kW cooling, IP64. Weight: 2200 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used steel workbench. Workbench features a durable wooden top, white steel frame, and integrated blue steel storage units (four drawers and two cabinet spaces). Optical condition shows signs of wear: scratches on drawers, scuffs on work surface. Tools and accessories included, such as hand tools, wrenches, and small parts stored inside drawers. Other additional features or documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer. Clean with minor wear. Includes applicator. Missing additional accessories or documentation other than visible components.

additional handling fee: 3.650 EUR

Lot consisting of 1 unit of used automated assembly line by Baumann, model LEAKRO-1000989, manufactured in 2016. Made of steel with visible scratches and signs of use. Optical condition appears clean with minor wear typical for industrial equipment. Accessories and documentation: Includes technical manuals, documentation folders, and visible wiring and integrated peripherals. Includes Stäubli robotic arm (TS60 bmn) and DEPRAG part feeders integrated into the machine.

additional handling fee: 50 EUR

Lot consisting of 1 used PCB conveyor module in good condition. Fitted with Datalogic scanning components and PLC control. Features: Width-adjustable with integrated barcode reading system, motor-driven roller conveyor with emergency stop, Datalogic CBX100 scanner interface units included. Electrical: 220–240 V, 50–60 Hz, 1PH.

additional handling fee: 25 EUR

Lot consisting of 1 mixed-condition set of tools and components. Includes PB SWISS TOOLS screwdrivers with minor wear, TE crimping tool, assorted electrical connectors, screws, and terminal pins in labeled compartments. Components and tools appear lightly used, stored in an organizer tray. Accessories and additional documentation not included.

additional handling fee: 25 EUR

Lot consisting of 1 well-maintained tool trolley. Constructed of metal and plastic. Good optical condition, with some signs of regular use. Contents include various tools (e.g., screwdrivers, pliers, wrenches, hammers, and measuring instruments) arranged in foam inlays. Missing or additional accessories not verified.

additional handling fee: 25 EUR

Lot consisting of 1 used screwdriver controller in good condition. Device includes integrated control keypad and multiple interfaces. Model: DEPRAG AST10-1-P. Power: 250 W. Voltage: 115/230 V, 50/60 Hz.

additional handling fee: 50 EUR

Lot consisting of 1 used metal storage cabinet and its contents. The cabinet shows signs of wear with visible surface scratches and minor dents. Contents include various boxes, instruments, manuals, Siemens-branded software, and multiple measurement devices such as a Spider8 unit and other accessories. Missing an inventory list and original manufacturer labels for some of the items.

additional handling fee: 175 EUR

Lot consisting of 1 automated PCB magazine loader by ROMMEL, model LPM E-530 C with integrated control panel. Visible minor wear on the exterior, such as light scratches and signs of previous use. Condition is unchecked. Accessories and documentation: none

additional handling fee: 25 EUR

Lot consisting of 1 unit of used current probe made of plastic and metal materials. Optical condition appears clean with minor visible signs of prior handling or storage. The device is provided in a fitted hard case with secure foam compartments. The case and probe show slight wear consistent with use. Accessories and documentation: Includes a fitted hard shell carrying case; no additional accessories or documentation visible.

additional handling fee: 50 EUR

Lot consisting of 1 used industrial assembly station. Structure includes steel components. Features two NEC monitors, an automated module with safety enclosure, precision assembly tool, keyboard, mouse, and connected hardware. Optically clean with minor usage wear; some scratches on surfaces. Accessories or documentation not included.

additional handling fee: 500 EUR

Lot consisting of 1 used cabinet containing assorted spare parts for soldering equipment. Cabinet is made of sheet steel with a double-door design and labeled with JBC, PACE Lottetechnik.” Contents include items such as electronic components and accessories. Some boxes and parts may show wear. Completeness of listed items not guaranteed; on-site inspection strongly recommended. Material: Sheet steel

additional handling fee: 350 EUR

Lot consisting of 1 used industrial robot 6-axis in very good condition. Features: Articulated arm, floor-mounted design, Teach pendant included, Controller: FANUC R-30iB Mate, Performance: 6 axes, 12 kg payload, 2009 mm reach. Electrical: 200–230 V, 50/60 Hz, 3-phase, 3.0 kVA. Weight: 250 kg (robot) + 40 kg (controller).

additional handling fee: 450 EUR

Lot consisting of 1 used temperature test chamber TSS1000/7555K in used condition. Visible signs of use and ageing present. Features: Two-stage refrigeration using R404A (6 kg) and R23 (3 kg), Control unit with membrane keyboard and RS232 interface. Electrical: 3×400 V, 38 A. EM30120 (Run In 3), maintained 1× per year.

additional handling fee: 1.275 EUR

Lot consisting of 1 used wave soldering machine dual wave in used condition. Shows visible signs of wear from production use. Features: Fluxer module, integrated conveyor, protective cover. Electrical: 230/400 V, 50 Hz, 38000 W. Documentation: Operation and wiring manuals included.

additional handling fee: 75 EUR

Lot consisting of 1 used FIFO buffer in very good condition. Shows minimal signs of use. Features: Vertical stack with enclosed housing, freestanding setup, Integrated touchscreen control and FIFO logic. Electrical: 230 V, 50 Hz, 4 A, 1 kVA. Pneumatic: 6 bar, 2 l/min, pneumatic actuator. Weight: 244 kg.

additional handling fee: 25 EUR

Lot consisting of 3 used grease dispensers. The dispensers are made of metal and come in individual hard plastic cases with foam inserts. Components include various accessories as seen in the images. Visible signs of use, such as scratches on the cases and foam degradation. Missing or replacement accessories cannot be verified.

additional handling fee: 1.150 EUR

Lot consisting of 1 used thermal reflow oven in clean condition. Painted surfaces show minor signs of wear, consistent with use. Includes operation manuals and technical documentation.

additional handling fee: 125 EUR

Lot consisting of 1 used Inline Test System. Constructed of metal. Optical condition shows minor wear, clean, no major scratches or dents. Includes user manual, integrated hardware, and panels as shown. Missing no visible components.

additional handling fee: 40 EUR

Lot consisting of 4 used double rowed gang change type feeder cart with 27 slots in good condition. Shows typical signs of industrial use. Feeder cart for SMT applications with 27 numbered feeder positions, Equipped with gang feed support for simultaneous component changeover, Includes removable dust box for maintenance debris, Sturdy mobile frame with stainless steel handles and heavy-duty wheels, Harting multipin connector power and signal interface integrated. Compatible with Panasonic CM402, CM602, CM401, DT401, CM202, and CM88 series machines.

additional handling fee: 1.450 EUR

Lot consisting of 1 used AOI system dual-track with 3D inspection in good condition. Features: Includes camera module, enclosed cabinet, pneumatic PCB clamping. Electrical: 230/400 V, 50–60 Hz, 2.5 kW. Pneumatic: 4–6 bar. Dimensions: 152.8 x 165.0 x 169.2 cm, 1550 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used label printer 300 dpi peel-off in good condition. Shows moderate signs of use such as scratches. Features: Print width: 104.1 mm, Print speed: up to 300 mm/s, Print Head Firmware: 2.1.0, Interfaces: USB, Ethernet, RS232, Parallel, 4x USB Host, SD card slot (max. 512 GB). Electrical: 100–240 V, 50–60 Hz, 2 A max. Dimensions: 46 x 25.2 x 28.8 cm, 10 kg.

additional handling fee: 50 EUR

Lot consisting of 1 used End-of-Line Test Bench. ESD proofen aluminium Workstation product specific test unit. Includes one label printer, two monitors with keyboard and mouse, handheld barcode scanner. Printer shows minor wear on the exterior, clean with no reported damages.

additional handling fee: 1.375 EUR

Lot consisting of 1 used screen printer with spot cooler in good condition. Shows signs of use and handling. Features: stencil-based printing, enclosed cabinet design. Electrical: 230 V, 50/60 Hz, 3.5 kVA, 6.4 A. Performance: max load 15 A, 2 kW cooling, IP64. Weight: 2200 kg.

additional handling fee: 25 EUR

Lot consisting of 1 functional grayscale reference (steel case with grayscale tiles). Clean condition with minor handling marks. Accessories include gloves and reference documentation.

additional handling fee: 50 EUR

Lot consisting of 4 units of used Siemens SIMATIC Rack PC workstations on mobile metal carts. The carts and computing units show visible signs of wear, including light surface scratches and minor scuffs. Keyboard, monitor, and cabling are visible in the images. Hard drives appear to have been removed, as labeled. Condition is unchecked with no claims of functionality. Accessories and documentation: Keyboard, monitor, multiple cables. Additional documentation or accessories are not visibly included.

additional handling fee: 25 EUR

Lot consisting of 1 used air purifier HEPA high-capacity in very good condition. Features: Filter-based air purification, mobile construction, Noise level: <51/62 dB(A), Version: EIH-K, Protection class: IP23. Electrical: 220–240 V, 50/60 Hz, 2.6 kW, 11.3 A. Dimensions: 69 x 61 x 130 cm, 89 kg.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used device in clean condition. Visible wear includes minor surface scratches and marks. Accessories and documentation: none provided.

additional handling fee: 50 EUR

Lot consisting of 1 used vertical FIFO Buffer in good condition. Shows moderate wear from production use. Features: Vertical loader with screw-driven lift mechanism, Touch interface and emergency stop button. Electrical: 220-240 V, 50-60 Hz, 2 Δ. Pneumatic:

additional handling fee: 25 EUR

Lot consisting of 1 used industrial vacuum cleaner made of mixed materials (plastic and metal). Optical condition: scratches and dust present; operational status not verified. Accessories include hose and nozzle; missing manual or additional attachments.

additional handling fee: 25 EUR

Lot consisting of 1 calibration kit in clean condition. Includes calibration chart, gloves, and blue cleaning cloth. Packed in a sturdy silver carrying case with handle. Case shows minor wear.

additional handling fee: 75 EUR

Lot consisting of 1 used FIFO buffer in very good condition. Shows minimal signs of use. Features: Vertical stack with enclosed housing, freestanding setup, Integrated touchscreen control and FIFO logic. Electrical: 230 V, 50 Hz, 4 A, 1 kVA. Pneumatic: 6 bar, 2 l/min, pneumatic actuator. Weight: 244 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used dc power supply SSP 120-20 in very good condition. Features: Typ SSP 32 N 20 RU 10P, State 4, Output range: 0–20 V, 0–10 A, 120 W, Interfaces: RS-232, analog interface with trigger and digital outputs, Control via rotary encoder and keypad. Electrical: 230 V, 50–60 Hz, 280 VA. Dimensions: 397.5 x 221.5 x 88 mm, 2.8 kg.

additional handling fee: 50 EUR

Lot consisting of 1 drawer-based steel cabinet, 2x9 drawers stocked with assorted mechanical OEM parts such as linear guides, bearings, gears, knobs and damping elements. IKO, FAG, NSK, INA, SNR, assorted OEM components in labeled drawers

additional handling fee: 1.450 EUR

Lot consisting of 1 used AOI system dual-track with 3D inspection in good condition. Features: Includes camera module, enclosed cabinet, pneumatic PCB clamping. Electrical: 230/400 V, 50–60 Hz, 2.5 kW, 8 A. Pneumatic: 4–6 bar. Dimensions: 152.8 x 165.0 x 169.2 cm, 1550 kg.

additional handling fee: 500 EUR

Lot consisting of 1 used steel cabinet containing spare parts. Items show general wear typical of storage. Completeness of parts not guaranteed. No documentation or accessories included.

additional handling fee: 25 EUR

Lot consisting of 1 used calibration kit for light calibration and testing tool, made of aluminum. Optical condition clean with minimal signs of use. Includes gloves, calibration chart, gray scale plates, and detailed testing documentation. Carrying case handle intact and foam insert for secure placement of components present.

additional handling fee: 25 EUR

Lot consisting of 1 used digital measuring instrument. Outer casing made of heavy-duty plastic; front panel shows minor wear consistent with previous use. Testing leads seen in image are included. Power cable appears intact. Calibration details noted on rear panel sticker.

additional handling fee: 25 EUR

Lot consisting of 1 used Calibration Plate with signs of handling wear. Aluminum storage case included with foam padding for safe transport and storage. Documentation or additional accessories not included.

additional handling fee: 50 EUR

Lot consisting of 1 unit of a used vacuum packaging machine made of stainless steel. The item shows visible surface wear, including scratches and signs of prior use. Casters on the base suggest mobility. Accessories and documentation: Includes operator's manual and documentation.

additional handling fee: 25 EUR

Lot consisting of 1 used optical calibration grid in a metal protective case. Clean exterior, minor expected wear. Includes protective foam lining and white gloves. No additional accessories or documentation included.

additional handling fee: 25 EUR

Lot consisting of 1 used screw feeding unit electric-pneumatic in very good condition. Features: PLC-controlled unit with integrated pneumatic actuator, Front feed mechanism with mounting interface. Electrical: 24 V, 10 VA.

additional handling fee: 50 EUR

Lot consisting of 10 units of used steel cabinets with double doors. Made of steel. Some visible signs of wear are present, including minor surface scratches and cosmetic imperfections. Cabinets are empty inside.

additional handling fee: 25 EUR

Lot consisting of 2 units of used calipers, made of stainless steel, measuring up to 150mm. Optical condition shows signs of wear with visible scratches and slight rust spots but generally clean. Accessories and documentation: Includes original storage cases with foam inserts. No further documentation or accessories included.

additional handling fee: 450 EUR

Lot consisting of 1 used temperature test chamber TS1400/50-10K in used condition. Visible signs of use present. Single-stage refrigeration with R404A (11 kg), digital interface with USB, Electrical: 3×400 V, 55 A. ETA0029 (Run In 25), maintained once per year.

additional handling fee: 150 EUR

Lot consisting of 5 sheet steel Cabinets, Double doors, 90x42x195. No content included.

additional handling fee: 1.375 EUR

Lot consisting of 1 used placement machine by Panasonic in good optical condition. Includes user manuals.

additional handling fee: 25 EUR

Lot consisting of 1 used laboratory power supply programmable in good condition. Shows minor signs of use and handling. Features: Interface: RS-232/RS-485, remote programming, DIP-switch configuration, Digital front control, rackmount design. Electrical: 85–265 V, 47–63 Hz, 1520 W. Dimensions: 43.3 x 42.3 x 4.4 cm, 8.5 kg.

additional handling fee: 25 EUR

Lot consisting of 1 used Load Measuring Line Camera kit with steel casing. Includes load cell meter, height sensor with mount, manuals, and foam-padded case. Minor wear observed, clean condition. Accessories appear complete.

additional handling fee: 50 EUR

Lot consisting of 1 used cabinet, minor scratches, full of mixed technical items. Material: steel cabinet, various items inside appear to include electronics, wiring, and hardware. Included content as shown in photos, documentation not visible.

additional handling fee: 1.375 EUR

Lot consisting of 1 used placement machine by Panasonic in good optical condition. Includes user manuals.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used Rohde & Schwarz MPEG2 Measurement Generator DVG. The unit shows signs of prior use with visible surface marks and minor scratches. Condition is unchecked. Accessories and documentation: none provided.

Electrostatic-safe workstations and equipment

additional handling fee: 50 EUR

Lot consisting of 1 unit of used workstation made of aluminum framing with integrated overhead lighting. Visible signs of wear include minor scratches and light dents on the surface. Comes with a mounted light bar, dual monitor mounts, and three integrated locking drawers. Condition is unchecked.

additional handling fee: 75 EUR

Lot consisting of 1 used Industrial Handling Unit. Constructed mainly from aluminum and clear plastic panels. Shows minor wear, with scratches visible on surfaces. Mounted electronic components and pneumatic connectors included.

additional handling fee: 475 EUR

Lot consisting of 1 unit of a used cleaning system made of stainless steel. Optical condition shows visible wear such as minor scratches and signs of use on the exterior surface. Accessories and documentation: includes a CD, manual, and accompanying literature.

additional handling fee: 25 EUR

Lot consisting of 1 used calibration plate. Optical condition shows clean surface with minor signs of use. Includes foam-lined storage case. No additional accessories or documentation included.

additional handling fee: 50 EUR

Lot consisting of 1 unit of used Tool Cabinet, Fa. , Model: , Visible wear and scratches on the surface consistent with use, with paint scuffs and minor dents. Includes 8 drawers containing a variety of tools: pliers, screwdrivers, hammers, calipers, files, bits, ratchets, and fasteners. Accessories and documentation: none visible.

additional handling fee: 50 EUR

Lot consisting of 1 pre-owned conveyor system. Material includes metal frame with glass panel. Optical wear consistent with usage. No visible major dents or scratches. Data sheet present; other documentation/accessories not included.

additional handling fee: 25 EUR

Lot consisting of 1 system maintenance service tool kit. The kit contains various tools and accessories for servicing VISCOM X7056 systems, including lubricants, cleaning materials, and precision tools. Includes metal bits, a tube of power paste, and a Nevr-Dull magic wadding polish. Shows light wear on the case; internal tools appear in clean condition; some packaging unopened. Missing documentation.

additional handling fee: 25 EUR

Lot consisting of 1 unit of used magnetic base stand made of metal. The item shows light signs of use, such as minor surface scratches, but appears clean overall. Accessories and documentation: none provided.