Online Auction | JLR - 4-Cylinder Crankshaft Machining Line Components

Binding Handling & Loading Fee:
£2500 + VAT


6 axis robot maximum capacity 6Kg, range 1611mm, with type KRC4 controller and 00-168-334 teach pendent, 3 x 400 volts

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 500Kg, range 2826mm including KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 3m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£850 + vat


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 60Kg, range 2033mm including a KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£2950 + VAT


Stationary grinding machine, 500 x 220, 1 x grinding head, Swing 150mm, grinding length 500mm, maximum wheel spindle 350mm diameter 40 Kw, work spindle 5 Kw motor with Siemens Simatic flat panel touch screen control console, S/No. 862-67 DOM 2013

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with three travelling component loading - unloading robots approx. length 14.265m including reject conveyor and Siemens Sinumerik HMI operator control station, DOM 2013

Binding Handling & Loading Fee:
£500 + VAT


Granite fixture table 1500mm x 1000mm on steel base stand including adjustable fitted fixture for checking crankshafts size 500mm x 150mm

Binding Handling & Loading Fee:
£3500 +VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£4500 + VAT


Fully automatic dual Station Intermediate Wash each station has identical washing and drying at the same station, a 30 minute total wash cycle time for both stations, a blower pump is used for drying and any swarf is collected by a magnetic swarf conveyor and the wash station has an auto mag filtration system to remove debris, the wash tank has an oil skimmer and a Effluent tank, mist is removed by a single exhaust extraction and filtration system, the machine is controller by a single HMI with Siemens control panel and interlocks and interfaces units

Binding Handling & Loading Fee:
£2000+ VAT


Custom made twin robot deburring cell to include 2 x Kuka KR6 R900 Sixx, 6 axis robots with KRCR4 compact controllers and 2 x teach pendents also including 1 x Kuka KR6R900 Sixx spare robot without controller cables or teach pendent (2012)

Binding Handling & Loading Fee:
£850 +VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£12900 + VAT


11 axis cnc machining centre with two 24 tool holder chain magazines for supplying tools to the work spindles, X-1 axis 1400mm, Y-1 axis 250mm, Z-1 axis 630mm, X-2 axis 1400mm, Y-2 axis 250mm, Z-2 axis 250mm, Z-2 axis 630mm, V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, spindle speed up to 8000 r.p.m, 45 KN, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control panels and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£1900 + VAT


Through feed crankshaft mounting pallet washer two station cleaning system it contains the following stations,1 Spray cleaning in water-based washing solution at 40 to 65°, station 2 blowing off at room temperature the system works without generating waste water, water consumption is minimised by recirculation of the media using its filtration plants, fitted with Siemens Simatic touch panel control, approx. external dimensions of the system length 7400 mm x width 2340 mm x height 2325 mm, 400 volt, 50 Hz, 36 KVA

Binding Handling & Loading Fee:
£850+ VAT


freestanding Jib arm, span 3000mm, maximum swl 250 Kg, Please note no fitted hoist this lot is just the jib arm only.

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£12500 +VAT


Overhead machine loading gantry with two travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 9.68m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 500Kg, range 2826mm including KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 60Kg, range 2033mm including a KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£850+ VAT


Bolted freestanding steel beam gantry structure maximum capacity 250 Kg, approx. size 14.56m (L) x 7.77m (W) x 4.86m under top beam height, comprising of 3 x bolted freestanding frame arches with 2 x fitted aluminium gantry runway runner beams and 1 x Konecranes manual aluminium crossbeam fitted with a Konecranes CLX02C08 1 025 5 - 250kg electric chain hoists with cable pendent control.

Binding Handling & Loading Fee:
£12900 + VAT


11 axis cnc machining centre with two 24 tool holder chain magazines for supplying tools to the work spindles, X-1 axis 1400mm, Y-1 axis 250mm, Z-1 axis 630mm, X-2 axis 1400mm, Y-2 axis 250mm, Z-2 axis 250mm, Z-2 axis 630mm, V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, spindle speed up to 8000 r.p.m, 45 KN, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control panels and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft 'L' shaped transfer chain conveyor approx. size 7.417m x 5.92m x 2222m wide x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
WITHDRAWN


Stainless steel construction 75°C rotary parts washer with 900mm diameter basket including Filtermist ectraction unit, 415 volts 79Kw

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£3500+ VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£600+ VAT


3 x small parts adjustable storage racks with chipboard shelve inserts 2 x 920mm (W) x 620mm (D) x 1180mm (H) 1 x 920mm (W) x 620mm (D) x 1830mm (H) and two bays of demountable storage shelving 2050mm (W) x 550mm (D) x 2m (H) - Please note that the contents on the storage racking is Not included with this lot

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with one travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 15m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey, no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£4950 + VAT


Pallet loading and off loading end of production storage buffer consisting 3 x lanes of powered roller conveyor the two outside lanes are for off loading pallet and the middle line is for loading empty pallets into the buffer system all lanes are protected with light curtains, approx. size of roller conveyor system, length 7m x width of each lane 1.23m also including a Siemens Simatic touch panel and control cabinet

Binding Handling & Loading Fee:
£3500+ VAT


Bolted freestanding steel beam gantry structure maximum capacity 250 Kg, approx. size 8.56m (L) x 8.66m (W) x 4.5m under top beam height, comprising of 3 x bolted freestanding frame arches with 2 x fitted aluminium gantry runway runner beams and 1 x Konecranes manual aluminium crossbeam fitted with a Konecranes CLX02C08 1025 5 - 250kg electric chain hoists with cable pendent control.

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with two travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 12m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with two travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 20.03m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£2500 + VAT


6 axis robot maximum capacity 120 Kg, range 2896mm, with type KRC4 controller and 00-168-334 teach pendent 3 x 400 volts

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, payload 150Kg, including IRCS single controller, Complete with DSQC 679 teach pendent (Flex Pendant S/N: 954364#00255033) - (UNUSED)

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with one travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 15m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£2500 + VAT


6 axis robot maximum capacity 120 Kg, range 2896mm, with type KRC4 controller and 00-168-334 teach pendent, 3 x 400 volts

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor- DOM 2014

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£1950+ VAT


High-precision inspection of roundness and cylindrical geometry for large, heavy or complex parts. Precision inspection machine for measuring roundness and cylindrical geometry RONt Roundness,STRt Vertical Straightness, FLTt Flatness, ECC Eccentricity, SQR Squareness, Parallelism, CONC Concentricity, COAX Coaxiality (ISO/DIN, CYLc Cylindricity, Run-out (radial and axial), Total run-out(radial and axial), Harmonics, Partial Arc, Interrupted surfaces, Slope analysis. Faulty spares or repair only

Binding Handling & Loading Fee:
£350 + VAT


Vision system for reading barcodes

Binding Handling & Loading Fee:
£29500 + VAT


Crankshaft Induction hardening machine two station with 4 axis per station, raise and lower shuttle, operating parameters induction 60Volts, 4000 amp, induction cycle time 10 seconds, case depth 2.5mm, fitted with Siemens Simatic touch panel terminal, 400 volts, 140 KVA currently used for crankshaft hardening S/No. 21.30219

Binding Handling & Loading Fee:
£1750 + VAT


Crankshaft optical shadow graph measuring system with control cabinet and operating system

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft transfer chain conveyor approx. size 6.53m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£1500+ VAT


Enclosed twin arm pneumatic compressed air safety blow down cabinet.

Binding Handling & Loading Fee:
£3500 + VAT


Powered crank shaft 'L' shaped transfer chain conveyor approx. size 8.87m x 9.126m 2.252m wide x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2014

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with two twin travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 14m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type ATB-120-2000B-B2 120 Kg cable hoist with cable pendent control Brown and Holmes crankshaft fixture attachment is NOT included with this lot.

Binding Handling & Loading Fee:
£3500 +VAT


Powered crank shaft transfer chain conveyor approx. size 7.38m x 2.93m x 1100mm to the centre line of crank when a fixture is fitted, - DOM 2013

Binding Handling & Loading Fee:
£850 + VAT


Free standing column jib arm crane with bolted base, column height approx. 3,5m, two section folding jib arm, approx. Span 3m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

[Please note this lot DOES NOT include the ROBOT]

The robot photographed is lot no. 5320146

Binding Handling & Loading Fee:
£4000 + VAT


Inspection and gear fitting station to include operator inspection station with induction heating and fitting station including roller transfer conveyor and Morposs final inspection system

Binding Handling & Loading Fee:
£2950 + VAT


Stationary grinding machine, 500 x 220, 1 x grinding head, Swing 150mm, grinding length 500mm, maximum wheel spindle 350mm diameter 40 Kw, work spindle 5 Kw motor with Siemens Simatic flat panel touch screen control console, S/No. 862-78 DOM 2014

Binding Handling & Loading Fee:
11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£2500+ VAT


Jenoptik Industrial Metrology fully automated measuring station, HOMMEL-ETAMIC wavemove combines high-precision roughness and contour Waveline measuring systems currently used in the manufacturing of combustion engines measuring surface finish. Calculation of all common profile, roughness and waviness parameters. Includes upgradedsafety system (light curtain and related controls).

Binding Handling & Loading Fee:
£9000 +VAT


A modular design micro finishing system used to micro finish crankshaft’s (5) main and (4) Pin journals, Flange oil seal and Thrust Journal, maximum capacity of 760-mm Part Length the micro finishing process dramatically, consistently and statistically optimizes the geometry and the surface finish that affects the crankshaft function. All diameters are Micro finished twice, level-I affects part geometry, level-II affects surface finish, rough and finish process,, A coarser abrasive film is used for the Level-I process than for the Level-II process, Two Operator control consoles are located in between Station 1 and 2 and another located at Station 3 each workstation has a head and tailstocks so supporting the crankshaft between centres, Pin and main arm assemblies in Station 1 and 2 are hydraulically actuated scissor type units. They are held in wear plate that position the tooling in line with the crankshaft bearing journals. - DOM 2013

Binding Handling & Loading Fee:
£11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor - DOM 2014

Binding Handling & Loading Fee:
£3950+ VAT


Bolted freestanding steel beam gantry structure maximum capacity 250 Kg, approx. size 21.35m (L) x 8.95m (W) x 4.5m under top beam height, comprising of 6 x bolted freestanding frame arches with 2 x fitted aluminium gantry runway runner beams and 3 x Konecranes manual aluminium crossbeams each fitted with a Konecranes CLX02C08 1025 5 - 250kg electric chain hoists with cable pendent controls.

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£2000+ VAT


5 x Autonomous mobile AGV, variant F N02 Maximum movement speed 0.75m/s, maximum treailer weight 3000Kg, track weight 375 Kg, Maximum traction force 1000N, operational voltage 36 V=, power 1200 W (unused)

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with two travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 40.85m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£2750 + VAT


Though feed cooling tunnel for cooling crankshafts after induction hardening process, cooling tunnel date size of entire plant, length 3800mm, width 2600mm, height 2950mm,effective spatial dimensions approximately 3,270 x 2,270 x 1,500 mm LxWxH, 3.2 circulation, circulation air mode circulation air volumetric flow approximately 6,000 m³/h, motor power 3.0 kw nominal current: 5.8 A, pressure: approximately 912 Pa, cooling power: 20 kW

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with two travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 18.5m x 2.660mm to centre line of placement robot head, DOM 2013

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey, no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control panel and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£2950 + VAT


Stationary grinding machine, 500 x 170, 2 x grinding heads, swing 210mm, grinding length 750mm, maximum wheel spindle 520mm diameter, 10,000rpm, 49.1Kw motor, work spindle 13 Kw motor, S/No. 668-88, DOM 2013, machine weight 17500Kg

Binding Handling & Loading Fee:
£29500 + VAT


Crankshaft Induction hardening machine two station with 4 axis per station, raise and lower shuttle, operating parameters induction 60Volts, 4000 amp, induction cycle time 10 seconds, case depth 2.5mm, fitted with Siemens Simatic touch panel terminal, 400 volts, 140 KVA currently used for crankshaft hardening S/No. 21.30220

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey, no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£4500 + VAT


The 7 station rotary washing machine is designed to wash crankshafts, it uses filtered wash solution from the machine reservoir, which is automatically kept full of wash solution, the cleaning process is fully automatic incorporating programmable washing and drying driven by servo controlled encoded motors. Station 1 Load / Unload, Station 2 Wash, Station 3 - 2nd Wash, Station 4 is a repeat of Station 2, Station 5 Drain and Dry, Station 6 Dry, Station 7 is a repeat of Station 6 the machine is fitted with coarse filtration, a fully automatic magnetic filtration system for effectively removes ferrous debris, 3 x 15 kW immersion heaters are provided for rapid heating of the wash reservoir to the required operating temperature after a water change, two centrifugal drying blowers, mist is extracted and filtered from the drying stations by a single extraction and filtration unit, machine is controlled from a single control panel complete guarded by interlock interfaces. The panel utilizes an ASI system.

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 500Kg, range 2826mm including KRC4 controller, please note no teach pendent and some cables missing

Binding Handling & Loading Fee:
£150+ VAT


Fully adjustable spindle tooling tooling storage racking system in three sections, with pull out shelving draws fitted with plastic tool holder inserts, approx sizes 1 x 8m (L) x 800mm (D) x 2m (H), 1 x 2.24m (L) x 800mm (D) x x 2m (H) Please note that the spindle tooling in the photos is NOT included with this lot its just the tooling storage racking system

Binding Handling & Loading Fee:
£11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor, - DOM 2013

Binding Handling & Loading Fee:
£12500 + VAT


Overhead machine loading gantry with five travelling component loading - unloading robots including reject conveyor and Siemens Sinumerik HMI operator control station, approx. length 20.42m x 2.660mm to centre line of placement robot head also including Plus trt oil-off 1448 crankshaft online cleaner, DOM 2013

Binding Handling & Loading Fee:
11500 + VAT


7 axis cnc machining centre with HSK 100 spindle, one 24 tool holder chain magazine, travel of axis as follows X axis 1400mm, Y axis 250mm, Z axis 630mm , V axis 5mm, B axis 360°, W axis 1800mm, E axis 90°, including RFID tool monitoring, Renishaw measuring and Morposs Artis monitoring, fitted with Siemens Sinumerik control console and Knoll swarf conveyor - DOM 2013

Binding Handling & Loading Fee:
£150+ VAT


8 draw steel tool storage cabinet in grey, no keys, size 720mm (W) x 725mm (D) x 1100mm (H) contents in cabinet is not included

Binding Handling & Loading Fee:
£300 + VAT


Ultra-high-resolution, standalone smart cameras for detailed inspections and measurements - Camera only

Binding Handling & Loading Fee:
£850 + VAT


Free standing bolted jib arm crane, span 2.5m, fitted with Kone type CLX02C081025 250 Kg chain hoist with cable pendent control.

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 60Kg, range 2033mm including a KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£750+ VAT


Six axis robot, load charge 60Kg, range 2033mm including a KRC4 controller, please note we are unsure if the robot has a matching KRC4 control unit so both robot and control unit is being sold as spares parts only, no teach pendent or cables

Binding Handling & Loading Fee:
£2950 + VAT


Two Crankshaft undercover pallet holding buffers with out feed roller conveyor