Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 49021 Machine Description: Filtration Unit (used) Manufacturer: AR FILTRAZIONI SRL Model: ARNO K2 YD Serial Number: 097220 Year of Manufacture: approx. 2020 Control System: Electronic control Country of Manufacture: Italy Dimensions / Weight: • Space requirement (left–right): 1100 mm • Space requirement (front–back): 700 mm • Overall height: 700 mm • Total weight: approx. 97 kg Electrical Specifications: • Total power consumption: 1.5 kW • Voltage: 400 V • Frequency: 50 Hz Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 48913 Machine Description: Tool Grinding Machine (used) Manufacturer: HARO Control System: Conventional Electrical Connection Data: • Connection voltage: 400 V • Mains frequency: 50 Hz Equipment: • Tool cabinet with extensive accessories • Machine very lightly used and in good condition Remarks: Technical details provided to the best of our knowledge, without guarantee. Inspection by the buyer is recommended.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 52693 Machine Description: Tool Holder (used) General technical data provided without guarantee. Buyers are requested to verify all relevant technical details during inspection.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 43445 Machine Description: Coil Unwinding Unit (used) Manufacturer: AMT Model: AHDR 500/1600 Serial Number: 2141/7148 Year of Manufacture: approx. 2003 Coil Unwinding Unit: • Type: Double uncoiler • Max. coil weight: 0.5 t • Max. outside coil diameter: 1600 mm • Load capacity: 1600 kg • Spreading range: 270–550 mm • Max. strip width: 150 mm • Equipped with 3 pressure arms • Line speed: approx. 20 m/min Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 41129 Machine Description: Chamber Washing System (used) Manufacturer: ZIPPEL Model: REMA-K1-100-1LB Serial Number: 450 Year of Manufacture: approx. 1995 Electrical Data: • Total power consumption: 57 kW • Voltage: 400 V • Frequency: 50 Hz Dimensions / Weight: • Width (left–right): 4900 mm • Depth (front–back): 2600 mm • Height: 2600 mm • Approx. total weight: 2600 kg Process Data: • Solvent-free washing medium • Basket size: 790 × 590 × 600 mm • Chamber size: 1200 × 1200 × 1200 mm • Useful space: 800 × 780 × 900 mm • Max. load: 200 kg Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 44802 Machine Description: Pump (reconditioned) Manufacturer: BUCHER Model: QX61-200/62-080/63-080 R447-6-D Year of Manufacture: Reconditioned Control System: — Technical Data: • Pressure (Pd): 125 / 210 / 320 bar • Displacement (Vg): 200 / 080 / 080 cm³/rev • Serial Number: 100036553 • Additional Code: Q18301417 Remarks: Machine fully reconditioned by ProdEq. All data provided to the best of knowledge and without guarantee.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 48415 Machine Description: CNC Sliding Head Lathe (used) Manufacturer: CITIZEN Model: C-16 Serial Number: X11290 Year of Manufacture: approx. 2003 Control System: CINCOM M6C Specifications: • Number of spindles: 2 • Driven tools: Yes • Max. bar diameter: 16 mm • Main spindle speed: up to 10,000 rpm • Sub spindle speed: up to 10,000 rpm • Cross slide spindle speed: up to 5,000 rpm • Electrical connection: 400 V Remarks: All information without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 51786 Machine Description: Strip Feeding Line (used) Manufacturer: KOHLER Serial Number: 60 066 Year of Manufacture: approx. 1990 Control System: Siemens S7 PLC Line Specifications: • Maximum sheet width: 260 mm • Maximum sheet thickness: 6.5 mm • Maximum coil weight: 3 t • Maximum line speed: 20 m/min • Material direction: right to left Coil Loading Table: • Maximum coil weight: 3 t Coil Uncoiler Unit: • Type: Single, movable • Maximum sheet width: 260 mm • Maximum coil weight: 3 t • Expansion range: 460–530 mm Remarks: Used strip feeding line equipped with coil loading table, single uncoiler, and precision straightener.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 43699 Machine Description: Surface and Profile Grinding Machine (used) Manufacturer: JUNG Model: C 740 CNC Serial Number: 8179 Year of Manufacture: approx. 2003 Control System: SIEMENS SINUMERIK CNC Surface Grinding Area: • Grinding length: 880 mm • Grinding width: 510 mm Table (Surface Grinding): • Clamping surface (L×W): 800 × 430 mm • Max. workpiece weight: 800 kg Magnetic Chuck: • Length: 800 mm • Width: 400 mm Grinding Spindle: • Speed range from: 1 500 rpm Remarks: Technical details provided to the best of our knowledge, without guarantee. Inspection by the buyer is recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 41887 Machine Description: Double Surface Grinding Machine (used) Manufacturer: DISKUS Model: DDS 750 IV CRVA CNC Serial Number: 7965 Year of Manufacture: approx. 1995 Control System: CNC control Siemens 810 T Working Range (Double Surface Grinding Machine): • Grinding wheel diameter: 750 mm • Max. grinding width – through-feed: 180 mm • Max. material thickness – through-feed: 30 mm • Max. grinding width – plunge-cut: 180 mm • Max. material thickness – plunge-cut: 30 mm Part Feed System: • Type: Rotary table feed Electrical Specifications: • Total power consumption: 95 kW Included Equipment: • Machine • Various flanges and used grinding wheels • Measuring control unit IONIC 17A Optional Equipment (available at extra cost): • 270 pcs. grinding segments 22A 100 S 6 B20 • 289 pcs. grinding segments 14C 80 L 10 B30 Condition: Machine disassembled and stored Remarks: All technical specifications are provided to the best of knowledge and without guarantee. Inspection is recommended for verification.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 48386 Machine Description: Clamping System (used) Manufacturer: MECATOOL Model: GPS 240 Included Components: • 4 base plates (C219000) at EUR 4,000 each • 4 aluminum clamping plates at EUR 400 each Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 50536 Machine Description: Coil Processing Line (used) Manufacturer: SOPREM Model: SOP/P/375/11/U-1250/ Serial Number: 151087 Year of Manufacture: approx. 1987 Control System: Electronic control Line Specifications: • Max. sheet width: 300 mm • Max. sheet thickness: 2.5 mm Coil Unwinding Unit: • Max. coil weight: 1.25 t Straightening Unit: • Max. sheet thickness: 4 mm • Min. sheet thickness: 0.3 mm • Max. material cross-section (450 N/mm²): 350 mm² • Number of straightening rollers: 11 • Roller diameter: 60 mm • Drive power: 2.7 kW • Loop control: yes Electrical Connection: • Data not specified Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 42392 Machine Description: Vertical Double Disc Grinding Machine (used) Manufacturer: DISKUS Model: DDS 750 XR Serial Number: 2022 Year of Manufacture: approx. 2000 Control System: SIEMENS 840 D Specifications: • Grinding wheel diameter: 750 mm • Max. grinding width (through-feed): 180 mm • Max. material thickness (through-feed): 30 mm • Max. grinding width (plunge-cut): 300 mm • Max. material thickness (plunge-cut): 80 mm • Grinding spindle drive (each): 48 kW • Workpiece feed: Rotary feed type, speed up to 20 mm/min Remarks: Technical details provided without guarantee.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 33393 Machine Description: Double Surface Grinding Machine, vertical (used) Manufacturer: DISKUS Model: DDS 750 RVA Serial Number: 6845 Year of Manufacture: approx. 1971 Control System: Conventional Working Range (Double Surface Grinding Machine): • Grinding wheel diameter: 750 mm • Max. grinding width (through-feed): 150 mm • Max. material thickness (through-feed): 70 mm Grinding Spindles: • Spindle 1 – max. speed: 610 rpm • Spindle 2 – max. speed: 610 rpm Part Feed System: • Type: Rotary table feed Dimensions / Weight: • Space requirement (left–right): 5230 mm • Space requirement (front–back): 4460 mm • Total height: 3600 mm • Total weight: approx. 11,000 kg Condition: Machine disassembled and in storage Remarks: All technical data provided to the best of knowledge, without guarantee. Buyers are advised to verify all specifications during inspection.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 48803 Machine Description: Bar Feeder (used) Manufacturer: LNS Model: EXPRESS 332 Serial Number: 102206-2003 Year of Manufacture: 2003 Control System: Electronic control Bar Range: 3–32 mm Electrical Specifications: • Voltage: 400 V • Frequency: 50 Hz Dimensions / Weight: • Length (left–right): 4200 mm • Depth (front–back): 1000 mm • Height: 1200 mm • Approx. weight: 500 kg Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 42744 Machine Description: Coil Processing Line (used) Manufacturer: ARKU Model: RM 5035.4/21 Year of Manufacture: approx. 1989 Overhauled: 2006 Control System: Siemens S5-115U PLC Line Data (Coil Processing): • Max. sheet width: 350 mm • Max. sheet thickness: 8 mm • Max. coil weight: 4 t • Max. working speed: 10 m/min • Material feed direction: left–right Coil Uncoiler Unit: • Type: Single uncoiler • Max. sheet width: 350 mm • Max. coil weight: 4 t • Max. outside coil diameter: 1500 mm • Expansion range: 370–530 mm • Max. working speed: 10 m/min Straightening Unit: • Max. sheet width: 350 mm • Max. sheet thickness: 8 mm • Number of straightening rollers: 21 • Straightening roller diameter: 50 mm • Number of entry/exit rollers: 2 • Entry roller diameter: 120 mm • Max. working speed: 10 m/min Electrical Specifications: • Total power consumption: 38 kW • Voltage: 380 V • Frequency: 50 Hz Dimensions / Weight: • Approx. total weight: 13,000 kg Included Equipment: • ARKU AH4000/MSG-4Q single uncoiler with hydraulic expansion Hydraulic front coil stop roller Hydraulic upper and lower pressure arms • ARKU sheet introduction aid Hydraulic top roller Adjustable bottom table (hydraulic) Manual adjustable wedge guide • ARKU precision straightening machine RM 5035.4/21 Drive for all straightening and feed rollers Hydraulic feed roller adjustment Motorized roll stand adjustment • ARKU loop bridge with ultrasonic loop control Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 45747 Machine Description: Hydraulic Press (used) Manufacturer: HYDRAP Model: HKP 12 Serial Number: H40 / 6477 Year of Manufacture: approx. 1990 Press Type: • Drive system: Hydraulic • Frame design: C-frame, single-column Pressing Force: • Total nominal force: 12 t Ram: • Stroke: 200 mm Electrical Connection: • Connection voltage: 380 V • Mains frequency: 50 Hz Dimensions / Weight: • Total weight: approx. 1 000 kg Additional Information: • Operating hours: 30 181 h • Last inspection: 27 July 2023 (overrun time 38 ms, overrun distance 60 mm) Remarks: Technical details provided to the best of our knowledge, without guarantee. Inspection by the buyer is recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 49805 Machine Description: Universal Machining Centre (used) Manufacturer: HURCO Model: VTX U Serial Number: MU43-01103017AG Year of Manufacture: approx. 2007 Control System: HURCO ULTIMAX CNC Working Range (Cubic): • Machining axes: 5 • X-axis travel: 800 mm • Y-axis travel: 700 mm • Z-axis travel: 510 mm • A-axis rotation: −30° to +110° • B-axis rotation: 360° Spindle / Head: • Speed range: up to 15 000 rpm • Tool holder: HSK E40 Tool Magazine: • Number of tool positions: 32 Electrical Connection: • Connected load: 30 kVA Remarks: Technical details provided to the best of our knowledge, without guarantee. Inspection by the buyer is recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 35548 Machine Description: Coil Processing Line (used) Manufacturer: KOHLER Model: 45.350/9-500.2 Serial Number: 82 043 Year of Manufacture: approx. 1984 Control System: Electronic control Coil Unwinding Unit: • Type: Double uncoiler • Max. coil width: 350 mm • Max. outside coil diameter: 1000 mm • Spreading range: 360–530 mm • Max. working speed: 60 m/min • Max. coil weight: 0.5 t Straightening Unit: • Max. sheet width: 350 mm • Max. sheet thickness: 4 mm • Min. sheet thickness: 0.5 mm • Max. cross-section (450 N/mm²): 750 mm² Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 42974 Machine Description: Precision Air Chuck (unused) Manufacturer: MICRO CENTRIC Model: 9-500-6-QC Year of Manufacture: approx. 2009 Technical Specifications: • Chuck diameter: 240 mm • Technology: APC • Repeat accuracy: approx. 0.0015 mm • Jaw stroke: 12 mm • Run-out accuracy: approx. 0.005 mm • Base jaws: DRM 134–182 mm • Equipped with QC precision jaw change system Remarks: Un-used high-precision pneumatic chuck with special jaws and workpiece stop. Technical data provided to the best of knowledge, without guarantee.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 38393 Machine Description: Vertical Surface Grinding Machine (used) Manufacturer: REFORM Model: AR10 Type 7 Serial Number: 5165/92 Year of Manufacture: approx. 1992 Control System: Conventional Technical Data: • Maximum grinding length: 1000 mm • Maximum grinding width: 250 mm • Table clamping surface (L × W): 1050 × 250 mm • Segment wheel diameter: 400 mm • Table speed range: 0–35 m/min • Grinding spindle motor: 18.5 kW Features: • High-performance knife grinding machine with motorized swiveling magnet • Equipped with CBN grinding wheel • No coolant system included Remarks: Machine in functional condition; ideal for industrial knife and tool sharpening applications.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 52691 Machine Description: Bar Feeder (used) Manufacturer: LNS Model: HYDROBAR Serial Number: 41991 / 6.32 HS Year of Manufacture: approx. 2001 Control System: Electronic control Dimensions / Weight: • Width (left–right): 4600 mm • Depth (front–back): 600 mm • Height: 1200 mm • Total weight: approx. 500 kg Electrical Specifications: • Connection voltage: 400 V • Frequency: 50 Hz Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 39715 Machine Description: Tool Holders (used) Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
800 € (EURO)


Internal Reference Number: 46842 Machine Description: Deep Hole Drilling Machine (cubic type, used) Manufacturer: TBT Model: BW 200 Serial Number: 106061-11 Year of Manufacture: 2001 Control System: Siemens 840 D CNC Working Area – Cubic: • Number of machining axes (without parallel axes): 5 • X-axis travel: 800 mm • Y-axis travel: 600 mm • Z-axis travel: 800 mm • W-axis travel: 1250 mm • B-axis rotation range: 0° – 360° Drilling Section: • Max. drilling depth: 800 mm • Drilling capacity (solid drilling, steel): 25 mm Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
on Request


Internal Reference Number: 51124 Machine Description: Vertical Machining Center (APC, used) Manufacturer: MAZAK Model: FJV 35/60 Year of Manufacture: approx. 2016 Control System: Mazatrol CNC Working Area – Cubic: • Number of machining axes (without parallel axes): 3 • X-axis travel: 1500 mm • Y-axis travel: 800 mm • Z-axis travel: 660 mm • Spindle nose to table distance (max.): 820 mm Table: • Table size (left–right): 1740 mm • Table size (front–back): 750 mm • Max. workpiece weight: 2500 kg Spindle / Head: • Speed range: 35 – 10 000 rpm • Spindle taper: ISO SK 50 Tool Magazine: • Not specified Remarks: Technical data provided to the best of knowledge, without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 48355 Machine Description: Universal Machining Centre (APC) (used) Manufacturer: FEHLMANN Model: PICOMAX 60 M Serial Number: 14508590 Year of Manufacture: approx. 2008 Control System: HEIDENHAIN iTNC 530 Specifications: • Number of machining axes: 5 • Travel (X / Y / Z): 505 / 355 / 610 mm • Max. spindle speed: 20,000 rpm • Tool holder: ISO SK 30 • Tool magazine capacity: 32 positions • Workpiece handling: Pick-up manipulator Remarks: All data provided to the best of knowledge and without guarantee.

Binding Handling & Service Fee:
500 € (EURO)


Internal number: 42374 Machine designation: Double-face grinding machine, vertical (used) Manufacturer: DISKUS Model: DDS 457 III PRVM-CNC Serial number: 7976 Year of manufacture: approx. 1997 Control system: Siemens 840 C CNC control Working area (double-face grinding machine): • Grinding wheel diameter: 457 mm • Maximum grinding width (through-feed grinding): 80 mm • Maximum material thickness (through-feed grinding): 20 mm • Maximum grinding width (plunge grinding): 205 mm • Maximum material thickness (plunge grinding): 80 mm Grinding spindles: • Spindle 1 – Drive power: 23 kW • Spindle 2 – Drive power: 23 kW Part feed: • Design: Circular feed • Feed speed: 20–240 mm/min Accessories and scope of delivery: • Complete machine • Emulsion tank, built in 2012 • IONIC 17A measuring controller Video link: https://youtube.com/embed/OxZCLC3dBM8 Note: Technical specifications are provided to the best of our knowledge, but without guarantee. Inspection is recommended for verification.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 46805 Machine Description: Coil Feed Line / Strip Processing Line (used) Manufacturer: KOHLER Model: 50.140/21-3000.1VSRM Serial Number: 60111 Year of Manufacture: approx. 1999 Control System: PLC control Siemens S5-115U Country of Manufacture: Germany Line Data (Strip Line): • Max. strip width: 140 mm • Max. strip thickness: 6 mm • Max. coil weight: 3 t Coil Loading Car: • Max. coil weight: 3 t • Lift: 500 mm Uncoiler: • Type: Single mandrel • Max. strip width: 300 mm • Max. coil weight: 3 t • Max. outside coil diameter: 1300 mm • Expansion range: 360–430 mm Straightening Unit (VSRM 50.140/21): • Max. strip width: 140 mm • Strip thickness: 3–6 mm • Number of straightening rolls: 21 • Roll diameter: 50 mm • Max. line speed: 43 m/min Electrical Specifications: • Total connected load: 35 kW Included Equipment: • Coil loading car CS3000 • Uncoiler 300.1 H • Straightening unit VSRM 50.140/21 • Edgewise straightening unit HK 140 Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 45966 Machine Description: Bandsaw – Automatic (used) Manufacturer: KASTO Model: HBA 360 AU Serial Number: 6016 109 102 Year of Manufacture: approx. 1995 Control System: PLC control Technical Data: • Max. cutting height: 360 mm • Saw blade length: 5334 mm • Saw blade width: 41 mm • Max. bar feed (single stroke): 600 mm • Cutting speed range: 20 – 130 m/min Electrical Specifications: • Total power consumption: 17 kW Dimensions / Weight: • Space requirement (left–right): 2900 mm • Space requirement (front–back): 2900 mm • Overall height: 1900 mm • Total weight: approx. 2,540 kg Remarks: All specifications provided to the best of knowledge and without guarantee. Inspection is recommended to verify all technical data.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 43446 Machine Description: Coil Unwinding Unit (used) Manufacturer: AMT Model: AHDR 500 Serial Number: 1835/6203 Year of Manufacture: approx. 2000 Coil Unwinding Unit: • Type: Double uncoiler • Max. coil weight: 0.5 t • Max. outside coil diameter: 1600 mm • Spreading range: 270–550 mm • Max. strip width: 150 mm • Equipped with 3 pressure arms • Line speed: approx. 20 m/min Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
150 € (EURO)


Internal Reference Number: 37723 Machine Description: Clamping Device (used) Manufacturer: — Model: — Serial Number: — Year of Manufacture: not specified Control System: — Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection is recommended to verify all specifications.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 48749 Machine Description: Surface Grinding Machine, Horizontal (used) Manufacturer: GEIBEL + HOTZ Model: FS 635 SA Serial Number: 7880595 Year of Manufacture: approx. 1995 Control System: SIEMENS S5-95U Working Range (Surface Grinding): • Grinding length: 600 mm • Grinding width: 350 mm • Max. distance spindle axis – clamping surface: 525 mm • Max. workpiece height (largest wheel): 375 mm Table (Surface Grinding): • Max. workpiece weight: 400 kg Magnetic Chuck: • Length: 600 mm • Width: 350 mm Grinding Spindle Head: • X-axis travel: 660 mm • Y-axis travel: 350 mm • Z-axis travel: 385 mm • Spindle drive power: 4.5 kW Grinding Wheel: • Type: Disk • Max. diameter: 300 mm • Bore: 76.2 mm • Width: 50 mm Feed Drives: • X-axis feed: 2000–28,000 mm/min Electrical Specifications: • Total power consumption: 8 kW • Voltage: 400 V • Frequency: 50 Hz Dimensions / Weight: • Approx. total weight: 2,100 kg Accessories: • Grinding wheel flange • 1 grinding wheel • Balancing device • Coolant system Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 48353 Machine Description: Vertical Machining Centre (used) Manufacturer: FEHLMANN Model: PICOMAX 60 CNC Serial Number: 14599243 Year of Manufacture: approx. 1999 Control System: HEIDENHAIN TNC 426 Specifications: • Number of machining axes: 3 • Travel (X / Y / Z): 500 / 350 / 610 mm • Table clamping surface (L × W): 920 × 380 mm • Spindle speed range: 50 – 18,000 rpm • Tool holder: ISO SK 30 • Tool magazine capacity: 24 positions Remarks: All details are provided without guarantee. Inspection recommended.

Binding Handling & Service Fee:
500 € (EURO)


Internal number: 43890 Machine name: Coil processing line (used) Manufacturer: ARKU Model: RM 50X/9 ECOPLAN Year of manufacture: approx. 2005 Control system: PLC control System data (coil processing line): • Maximum sheet width: 500 mm • Maximum sheet thickness: 4 mm • Maximum coil weight: 10.5 t • Material flow direction: right–left • Maximum working speed: 20 m/min Coil loading station: • Maximum coil weight: 10.5 t • Stroke: 750 mm Coil unwinding unit: • Design: Single coiler • Sheet width: 150–500 mm • Maximum coil weight: 10.5 t • Max. outer diameter of coil: 2020 mm • Spreading range: 470–530 mm Shear: • Maximum sheet thickness: 4 mm • Maximum working width: 530 mm • Max. stroke rate: 20/min Sheet straightening unit: • Sheet width: 150–500 mm • Sheet thickness: 2–4 mm • Number of straightening rollers: 9 • Straightening roller diameter: 56 mm • Feed roller diameter: 150 mm • Max. working speed: 20 m/min Electrical connection data: • Total power: 30 kW • Voltage: 400 V • Frequency: 50 Hz Dimensions / Weight: • Total weight: approx. 17,000 kg System components: • HUBTEX coil loading chair • ARKU AH single-side decoiler 10000/500/MSG-4Q • ARKU RM 5050/9 feed leveler (feed accuracy ± 0.1 mm) • Measuring wheel for slippage control • Huttenlocher & Schäfer KSK/S cross-cutting shear, built in 2017 Note: Technical specifications are not guaranteed; inspection is recommended for verification.

Binding Handling & Service Fee:
500 € (EURO)


Internal Reference Number: 43098 Machine Description: Cycle Lathe (used) Manufacturer: PADOVANI Model: LABOR E300 Year of Manufacture: approx. 1997 Control System: Siemens Cycle Control Construction: • Type: Flat-bed lathe • Number of spindles: 1 Working Range (Turning): • Max. swing diameter: 720 mm • Max. turning diameter: 380 mm • Max. bar capacity: 108 mm • Max. workpiece length: 1500 mm Main Spindle: • Speed range: 0 – 1200 rpm • Number of gearbox stages: 3 • Spindle bore: 108 mm Cross Slide: • Feed rate Z-axis: up to 5000 mm/min • Feed rate X-axis: up to 5000 mm/min • Rapid traverse Z-axis: 5000 mm/min • Rapid traverse X-axis: 5000 mm/min • Tool holder type: Turning tool holder Tailstock: • Distance between centres: 1500 mm • Quill stroke: 200 mm • Quill diameter: 120 mm • Quill taper: MK 6 Electrical Specifications: • Voltage: 400 V • Frequency: 50 Hz Dimensions / Weight: • Width (left–right): 4050 mm • Depth (front–back): 1730 mm • Height: 2050 mm • Approx. total weight: 5500 kg Included Equipment: • 3-jaw chuck Ø 315 mm • 1 steady rest • Tailstock Remarks: All technical data provided to the best of knowledge and without guarantee. Inspection recommended to verify specifications.