battery leak

able to apply self adhesive label up to 120m/min (90m/min), a barcode laser printer, and camera checking machine

q=10m³/h, h=80m

2 of 3 NOT WORKING OR BROKEN

3 chairs, office table, shelves

including a very nice magnifying lamp made in 2009

DIN50

material 1.4301

approx 78m3/hr stainless steel rotary lobe positive displacement pump, manufactured by Alfa Laval, type SRU6/260/LD, serial #110077, CE, driven by 11kW, 3/50/400/690 volt, 1440 rpm IP55 motor, mechanical seal, mounted on a baseplate

max working pressure 16bar. Option C36, C37, K1, K44

mainly circuit breaker

10 bar max

max 8.5bar. Option K1 C3

material 1.4301

d=0.1g. Last calibration 2020

with content pneumatic connection and O-ring

one cabinet seriously damaged

q=100m³/h, h=37m

6 and 8 bar screw compressor. The SX6 was built in 2012

4-axis. With NC controler

for seawage water retreatment plant. Max density 1.2

closed cabinet. Content unknown

Q=11m³ H=79?

wit loader battery 48V

with pedals

With 4x PACKLAB M120 DX 250 label applicators and 1x PACKLAB M90 DX 250able to apply self adhesive label up to 120m/min (90m/min), a barcode laser printer, and camera checking machine

Portotecnica Syncron 2360 Pressure Washers; volt 380; hz 50; max working pressure 160 bar; max flow 10 lt / min; power consumption kw 5.3

for seawage water retreatment plant. Max density 1.4

option K1 c3

including 2 metal cabinet with parts

q=80m³/h, h=37m

numbered N 1 P 60 - Drawing M. n:46584 from 1 december 1959. Offici grafico G. Vaccari - Sesto S.G.

closed cabinet. Content unknown

with content , lathe and boring machine spares

with angle grinder, welder, gauges, …

include also +1 older loader MORAN CP8

without content

approx 70 liter stainless steel portable tank with high speed mixer/agitator, manufactured by Antico Olindo e Cesare srl, CE, agitator type AMCzme 8, serial #33857, 1.5kW, 50 Hz, 380 volt, 200-1000 rpm, Ex d IIB motor, 170mm diameter impellor, tank 340mm diameter x 800mm straight side, open top, weld sloped bottom, agitator with manual raise and lower mechanism, 3-blade marine type impellor, all mounted on a carbon steel frame with wheels, built on controls, carbon steel cage with feed chute,

e=d=100g

content : angle grinder's wheels

max 1600kg

d=0.1g. Last calibration 2020

and other spares

lot also include TEMPERATURE CONTROLLER from ASCON TECHNOLOGIC model XE501 and Xe301

model 30HXC130--901--BEE, operating pressure 24 bars. 366L condensating water tank. ProDialog controler, Compressor(s) type & model 1x Carlyle 06NW2250S7NC-A0 and 1x Carlyle 06NW2209S7NC-A00

with content, screw and bolts

KAESER compressor spares, manual ball valves, servocommand valves, butterfly valvves with electric drive, ball valves inox, immersion pumps, WILDEN stainless steel ATEX membrane pumps type and more

d=0.1g. Last calibration 2017

d=0.1g. Last calibration 2023