Private Treaty Sale | Hella Sonnenschutztechnik GmbH | Closure of the Sun Protection Solutions Plant

Starts: 18 December 2025 at 13:30 GMT
Ends: 28 February 2026 at 15:00 GMT
On behalf of Hella Sonnenschutz GmbH, Maynards Europe GmbH offers machines and equipment for the production of the well-known plastic roller shutter systems. Highlights include extrusion lines from renowned manufacturers, including KRAUSS-MAFFEI and Battenfeld. More to come – register now to make sure you don’t miss any further highlights. Site visits can be arranged by appointment.
Share:
Showing 59 of 59 lots
  • 2890001_02.jpg
    2890001_03.jpg
    2890001_04.jpg
    2890001_05.jpg
    2890001_06.jpg
    2890001_07.jpg
    2890001_08.jpg
    2890001_09.jpg
    2890001_10.jpg
    2890001_11.jpg
    Deutsch
    LISTING 2890001

    Twin-Screw Extruder KRAUS - MAFFEI KMD 75 XS/P | 2012





    screw dia 75mm, Capacity: max 200kg/h, KraussMaffei-Berstorff control, weight 3,5 to /// Drive: SIEMENS 2860 / 30,5 rpm, 5.070 Nm, weight 1,2to
  • 2890002_02.jpg
    2890002_03.jpg
    2890002_04.jpg
    2890002_05.jpg
    2890002_06.jpg
    2890002_07.jpg
    2890002_08.jpg
    2890002_09.jpg
    Deutsch
    LISTING 2890002

    Calibration Table IDE ME 14/6.3 | 2013





    with three (3) SPECK pump systems, length of table ca. 4m
  • 2890003_02.jpg
    2890003_03.jpg
    2890003_04.jpg
    2890003_05.jpg
    2890003_06.jpg
    2890003_07.jpg
    2890003_08.jpg
    Deutsch
    LISTING 2890003

    Haul-Off Unit IDE ME 31/6.2 | 2013





    speed 0,1 - 11 m/min, pulling force 25.000 N, contact length 1.500 mm, profile clearance WxH 300 x 180 mm
  • 2890004_02.jpg
    2890004_03.jpg
    2890004_04.jpg
    2890004_05.jpg
    2890004_06.jpg
    2890004_07.jpg
    2890004_08.jpg
    2890004_09.jpg
    2890004_10.jpg
    Deutsch
    LISTING 2890004

    Punching Unit + Guillotine Unit IDE ME 41 / 6.S1 - D Quertrenneinheit | 2013





    punching force 1.800 N, operation method: C-Frame, punching sequence 130 strokes/min, punching die LxWxH 185x180x132
  • 2890005_02.jpg
    2890005_03.jpg
    2890005_04.jpg
    2890005_05.jpg
    2890005_06.jpg
    2890005_07.jpg
    2890005_08.jpg
    2890005_09.jpg
    2890005_10.jpg
    Deutsch
    LISTING 2890005

    Tipping Table IDE ME 82 D | 2013





    slide into adjacent profile 1-strand roller shutter, table length ca. 6.000 mm
  • 2890006_02.jpg
    2890006_03.jpg
    2890006_04.jpg
    2890006_05.jpg
    2890006_06.jpg
    2890006_07.jpg
    2890006_08.jpg
    2890006_09.jpg
    2890006_10.jpg
    Deutsch
    LISTING 2890006

    Twin-Screw Extruder KRAUS - MAFFEI KMD 75 XS/P | 2008





    screw dia 75mm, Capacity: max 200kg/h, KraussMaffei-Berstorff control, weight 3,5 to /// Drive: SIEMENS 2860 / 30,5 rpm, 5.070 Nm, weight 1,2to
  • 2890007_02.jpg
    2890007_03.jpg
    2890007_04.jpg
    2890007_05.jpg
    2890007_06.jpg
    2890007_07.jpg
    Deutsch
    LISTING 2890007
  • 2890008_02.jpg
    2890008_03.jpg
    2890008_04.jpg
    2890008_05.jpg
    2890008_06.jpg
    2890008_07.jpg
    2890008_08.jpg
    2890008_09.jpg
    Deutsch
    LISTING 2890008
  • 2890009_02.jpg
    2890009_03.jpg
    2890009_04.jpg
    2890009_05.jpg
    2890009_06.jpg
    2890009_07.jpg
    2890009_08.jpg
    Deutsch
    LISTING 2890009
  • 2890010_02.jpg
    2890010_03.jpg
    2890010_06.jpg
    2890010_07.jpg
    2890010_08.jpg
    2890010_09.jpg
    2890010_10.jpg
    2890010_11.jpg
    Deutsch
    LISTING 2890010

    Twin-Screw Extruder Battenfeld BBEX 2-90-25V | 2006





    screw dia 90mm, capacity max 300kg/h, BMCsmart operation panel, weight ca. 3to /// drive motor HENSCHEL T1MAX90 C-35L, SerNo 43-220/5, weight ca. 1,5to
  • 2890011_02.jpg
    2890011_04.jpg
    2890011_05.jpg
    2890011_06.jpg
    2890011_07.jpg
    2890011_08.jpg
    2890011_09.jpg
    Deutsch
    LISTING 2890011
  • 2890012_02.jpg
    2890012_03.jpg
    2890012_04.jpg
    2890012_05.jpg
    2890012_06.jpg
    2890012_07.jpg
    2890012_08.jpg
    2890012_09.jpg
    2890012_10.jpg
    2890012_11.jpg
    2890012_12.jpg
    2890012_13.jpg
    2890012_14.jpg
    2890012_15.jpg
    Deutsch
    LISTING 2890012
  • 2890013_02.jpg
    2890013_03.jpg
    2890013_04.jpg
    2890013_05.jpg
    Deutsch
    LISTING 2890013

    Tipping Table IDE MEN 53/7 | 2001





    tipping of profiles, table length ca. 6.000 mm
  • 2890014_02.jpg
    2890014_03.jpg
    2890014_04.jpg
    2890014_05.jpg
    2890014_06.jpg
    2890014_07.jpg
    2890014_08.jpg
    Deutsch
    LISTING 2890014

    Mobile / Co-Extruder IDE MEBH 20/5x25D | 2015





    screw dia 2omm, 2,2-2,6kW, 50.197 rpm, process length 25D, output 0,5 - 6 kg/h
  • 2890015_02.jpg
    2890015_03.jpg
    2890015_04.jpg
    2890015_05.jpg
    2890015_06.jpg
    2890015_07.jpg
    2890015_08.jpg
    2890015_09.jpg
    2890015_10.jpg
    Deutsch
    LISTING 2890015

    Twin-Screw Extruder KRAUS - MAFFEI KMD 75 XS/P | 2011





    screw dia 75mm, Capacity: max 200kg/h, KraussMaffei-Berstorff control, weight 3,5 to /// Drive: SIEMENS 2860 / 30,5 rpm, 5.070 Nm, weight 1,2to
  • 2890016_02.jpg
    2890016_03.jpg
    2890016_04.jpg
    2890016_05.jpg
    2890016_06.jpg
    2890016_07.jpg
    2890016_08.jpg
    Deutsch
    LISTING 2890016

    Calibration Table KRAUS - MAFFEI KM-KAL 6 XS | 2017





    four (4) SPECK pump units, length ca. 6m, weight 2,7to
  • 2890017_02.jpg
    2890017_03.jpg
    2890017_04.jpg
    2890017_05.jpg
    2890017_06.jpg
    2890017_07.jpg
    2890017_08.jpg
    2890017_09.jpg
    2890017_10.jpg
    2890017_11.jpg
    2890017_12.jpg
    Deutsch
    LISTING 2890017
  • 2890018_02.jpg
    2890018_03.jpg
    2890018_04.jpg
    2890018_05.jpg
    2890018_06.jpg
    Deutsch
    LISTING 2890018

    Tipping Table BASTON 710-00-300 | 1981





    tipping of profiles, table length ca. 6.000 mm
  • 2890019_02.jpg
    2890019_03.jpg
    2890019_04.jpg
    2890019_05.jpg
    2890019_06.jpg
    Deutsch
    LISTING 2890019
  • 2890020_02.jpg
    2890020_03.jpg
    2890020_04.jpg
    2890020_05.jpg
    2890020_06.jpg
    2890020_07.jpg
    2890020_08.jpg
    2890020_09.jpg
    2890020_10.jpg
    2890020_11.jpg
    2890020_12.jpg
    2890020_13.jpg
    Deutsch
    LISTING 2890020

    Twin-Screw Extruder Battenfeld BEX - 2 - 65 - 18V DURUMAX | 1998





    screw dia 65mm, weight 2,8to /// drive: Thyssen Henschel TPM 3-65-DOS-25, SerNo 6333547/13, weight 710kg
  • 2890021_02.jpg
    2890021_03.jpg
    2890021_04.jpg
    2890021_05.jpg
    2890021_06.jpg
    2890021_07.jpg
    2890021_08.jpg
    Deutsch
    LISTING 2890021
  • 2890022_02.jpg
    2890022_03.jpg
    2890022_04.jpg
    2890022_05.jpg
    Deutsch
    LISTING 2890022
  • 2890023_02.jpg
    2890023_03.jpg
    2890023_04.jpg
    Deutsch
    LISTING 2890023
  • 2890024_02.jpg
    2890024_03.jpg
    2890024_04.jpg
    2890024_05.jpg
    2890024_06.jpg
    2890024_07.jpg
    2890024_08.jpg
    2890024_09.jpg
    Deutsch
    LISTING 2890024

    Sawing Unit IDE ME 50/5 | 2001





    upstroke, saw blade dia 250 - 400mm, profile clearance WxH 340 x 20mm / dia 115 mm, sequence max 40 cuts/min
  • 2890025_02.jpg
    2890025_03.jpg
    2890025_04.jpg
    Deutsch
    LISTING 2890025
  • 2890026_02.jpg
    2890026_03.jpg
    2890026_04.jpg
    2890026_05.jpg
    2890026_06.jpg
    2890026_07.jpg
    Deutsch
    LISTING 2890026

    Mobile / Co-Extruder IDE MEBH 20/5x25D | 2015





    screw dia 2omm, 2,2-2,6kW, 50.197 rpm, process length 25D, output 0,5 - 6 kg/h
  • 2890027_02.jpg
    2890027_03.jpg
    2890027_04.jpg
    2890027_05.jpg
    2890027_06.jpg
    Deutsch
    LISTING 2890027
  • 2890028_02.jpg
    2890028_03.jpg
    2890028_04.jpg
    2890028_05.jpg
    2890028_06.jpg
    2890028_07.jpg
    2890028_08.jpg
    2890028_09.jpg
    Deutsch
    LISTING 2890028

    Twin-Screw Extruder KRAUS - MAFFEI KMD 75 XS/P | 2016





    screw dia 75mm, Capacity: max 200kg/h, KraussMaffei-Berstorff control, weight 3,5 to /// Drive: SIEMENS 2860 / 30,5 rpm, 5.070 Nm, weight 1,2to
  • 2890029_02.jpg
    2890029_03.jpg
    2890029_04.jpg
    2890029_05.jpg
    2890029_06.jpg
    2890029_07.jpg
    2890029_08.jpg
    2890029_09.jpg
    Deutsch
    LISTING 2890029

    Calibration Table KRAUS - MAFFEI KM-KAL 6 XS | 2016





    four (4) SPECK pump units, length ca. 6m, weight 2,7to
  • 2890030_02.jpg
    2890030_03.jpg
    2890030_04.jpg
    2890030_05.jpg
    2890030_06.jpg
    2890030_07.jpg
    2890030_08.jpg
    2890030_09.jpg
    2890030_10.jpg
    2890030_11.jpg
    2890030_12.jpg
    2890030_13.jpg
    2890030_14.jpg
    2890030_15.jpg
    2890030_16.jpg
    2890030_17.jpg
    2890030_18.jpg
    2890030_19.jpg
    Deutsch
    LISTING 2890030

    Haul-Off / Saw Combination KRAUS - MAFFEI KM-AS 28/2400 XS | 2016





    weight ca. 1,8to, mit zwei (2) Stück IDE Späneabsauganlagen ME AS 58
  • 2890031_02.jpg
    2890031_03.jpg
    2890031_04.jpg
    2890031_05.jpg
    2890031_06.jpg
    Deutsch
    LISTING 2890031
  • 2890032_02.jpg
    2890032_03.jpg
    2890032_04.jpg
    2890032_05.jpg
    2890032_06.jpg
    2890032_07.jpg
    2890032_08.jpg
    2890032_09.jpg
    2890032_10.jpg
    2890032_11.jpg
    Deutsch
    LISTING 2890032

    Conical Twin-Screw-Extruder KRAUS - MAFFEI KMD 43 K/P | 2011





    screw dia 43mm, Capacity: max 150kg/h, KraussMaffei-Berstorff control, weight 2,3 to /// Drive: SIEMENS 2860 / 30,5 rpm, 5.070 Nm, weight 1,2to
  • 2890033_02.jpg
    2890033_03.jpg
    2890033_04.jpg
    2890033_05.jpg
    2890033_06.jpg
    2890033_07.jpg
    2890033_08.jpg
    2890033_09.jpg
    Deutsch
    LISTING 2890033

    Calibration Table IDE ME 14/6.3 | 2015





    with three (3) SPECK pump systems, length of table ca. 4m
  • 2890034_02.jpg
    2890034_03.jpg
    2890034_04.jpg
    2890034_05.jpg
    2890034_06.jpg
    2890034_07.jpg
    2890034_08.jpg
    2890034_09.jpg
    Deutsch
    LISTING 2890034

    Haul-Off Unit IDE ME 30/5 | 2011





    speed ca. 0,1 - 11 m/min, pulling force ca. 25.000 N, contact length ca. 1.500 mm, profile clearance ca. WxH 300 x 180 mm, with foil application unit
  • 2890035_02.jpg
    2890035_03.jpg
    2890035_04.jpg
    2890035_05.jpg
    2890035_06.jpg
    2890035_07.jpg
    2890035_08.jpg
    Deutsch
    LISTING 2890035

    Sawing Unit IDE ME 50/5 | 2001





    upstroke, saw blade dia 250 - 400mm, profile clearance WxH 340 x 20mm / dia 115 mm, sequence max 40 cuts/min
  • 2890036_02.jpg
    2890036_03.jpg
    2890036_04.jpg
    2890036_05.jpg
    2890036_06.jpg
    Deutsch
    LISTING 2890036

    Tipping Table IDE ME-AS Sonder | 2001





    tipping of profiles, table length ca. 6.000 mm
  • 2890037_02.jpg
    2890037_03.jpg
    2890037_04.jpg
    2890037_05.jpg
    2890037_06.jpg
    2890037_07.jpg
    Deutsch
    LISTING 2890037
  • 2890038_02.jpg
    2890038_03.jpg
    2890038_04.jpg
    2890038_05.jpg
    Deutsch
    LISTING 2890038
  • 2890039_02.jpg
    2890039_03.jpg
    2890039_04.jpg
    2890039_05.jpg
    2890039_06.jpg
    2890039_07.jpg
    Deutsch
    LISTING 2890039

    Extraction system IDE ME-AS 53 | 1995





    fitted with Lammers motor, 230/400 V; 60 Hz; 4.2/2.4 A
  • 2890040_01.jpg
    2890040_02.jpg
    Deutsch
    LISTING 2890040
  • 2890041_01.jpg
    2890041_02.jpg
    Deutsch
    LISTING 2890041
  • 2890043_02.jpg
    2890043_03.jpg
    2890043_04.jpg
    2890043_05.jpg
    2890043_06.jpg
    2890043_07.jpg
    2890043_08.jpg
    2890043_09.jpg
    2890043_10.jpg
    2890043_11.jpg
    2890043_12.jpg
    2890043_13.jpg
    2890043_14.jpg
    2890043_15.jpg
    2890043_16.jpg
    2890043_17.jpg
    Deutsch
    LISTING 2890043

    Battenfeld TM 75/350 | 130116 100





    Own weight: 3300 kg; Hydraulic operative pressure: 210; rated motor power: 28,5 A; Rated voltage: 24 DC V
  • 2890044_02.jpg
    2890044_03.jpg
    2890044_04.jpg
    2890044_05.jpg
    2890044_06.jpg
    2890044_07.jpg
    2890044_08.jpg
    Deutsch
    LISTING 2890044
  • 2890045_02.jpg
    2890045_03.jpg
    2890045_04.jpg
    2890045_05.jpg
    Deutsch
    LISTING 2890045
  • 2890046_02.jpg
    2890046_03.jpg
    2890046_04.jpg
    2890046_05.jpg
    2890046_06.jpg
    2890046_07.jpg
    2890046_08.jpg
    2890046_09.jpg
    2890046_10.jpg
    2890046_11.jpg
    2890046_12.jpg
    2890046_13.jpg
    2890046_14.jpg
    2890046_15.jpg
    Deutsch
    LISTING 2890046

    Plastic injection moulding machine Battenfeld TM 750/350 | 26632





    Own weight: 3300 kg; rated motor power: 29 A; Rated voltage: 24 DC V
  • 2890047_02.jpg
    2890047_03.jpg
    2890047_04.jpg
    2890047_05.jpg
    2890047_06.jpg
    2890047_07.jpg
    2890047_08.jpg
    2890047_09.jpg
    Deutsch
    LISTING 2890047

    Surface grinding machine Bernardo BSG 2040 M | PWA-15033





    Power: 400 V; Frequency: 50 Hz; Rated power: 4 A; 1,5 kW; Own weight: 920 kg
  • 2890048_02.jpg
    2890048_03.jpg
    2890048_04.jpg
    Deutsch
    LISTING 2890048
  • 2890049_02.jpg
    2890049_03.jpg
    2890049_04.jpg
    2890049_05.jpg
    2890049_06.jpg
    2890049_07.jpg
    2890049_08.jpg
    2890049_09.jpg
    2890049_10.jpg
    2890049_11.jpg
    2890049_12.jpg
    2890049_13.jpg
    2890049_14.jpg
    Deutsch
    LISTING 2890049

    Plastic injection moulding machine Battenfeld PLUS 350/75 | 26859





    Own weight: 1000 kg; rated motor power: 17 A; Rated voltage: 24 DC V; Frequency: 50 Hz; Nominal power: 400 V; Rated current: 44 A
  • 2890050_01.jpg
    2890050_02.jpg
    Deutsch
    LISTING 2890050
  • 2890051_01.jpg
    2890051_02.jpg
    Deutsch
    LISTING 2890051
  • 2890052_02.jpg
    2890052_03.jpg
    2890052_04.jpg
    2890052_05.jpg
    2890052_06.jpg
    2890052_07.jpg
    Deutsch
    LISTING 2890052
  • 2890053_02.jpg
    2890053_03.jpg
    2890053_04.jpg
    2890053_05.jpg
    2890053_06.jpg
    Deutsch
    LISTING 2890053

    Separation unit IDE ME 50/6 | 2001





    Mains supply: 400 V; 50 Hz; Fuse max: 35 A; Power: 14 kW
  • 2890055_02.jpg
    2890055_04.jpg
    2890055_05.jpg
    Deutsch
    LISTING 2890055
  • 2890057_02.jpg
    2890057_03.jpg
    2890057_04.jpg
    2890057_05.jpg
    2890057_06.jpg
    Deutsch
    LISTING 2890057
  • 2890058_02.jpg
    2890058_03.jpg
    2890058_04.jpg
    2890058_05.jpg
    2890058_06.jpg
    2890058_07.jpg
    Deutsch
    LISTING 2890058
  • 2890059_02.jpg
    2890059_03.jpg
    2890059_04.jpg
    2890059_05.jpg
    2890059_06.jpg
    2890059_07.jpg
    2890059_08.jpg
    Deutsch
    LISTING 2890059
  • 2890060_02.jpg
    2890060_03.jpg
    2890060_04.jpg
    2890060_05.jpg
    2890060_06.jpg
    2890060_07.jpg
    2890060_08.jpg
    2890060_09.jpg
    2890060_10.jpg
    2890060_11.jpg
    2890060_12.jpg
    2890060_13.jpg
    2890060_14.jpg
    2890060_15.jpg
    Deutsch
    LISTING 2890060
  • 2890061_02.jpg
    2890061_03.jpg
    2890061_04.jpg
    2890061_05.jpg
    2890061_06.jpg
    2890061_07.jpg
    2890061_08.jpg
    2890061_09.jpg
    Deutsch
    LISTING 2890061
  • 2890062_02.jpg
    2890062_03.jpg
    2890062_04.jpg
    2890062_05.jpg
    Deutsch
    LISTING 2890062

Essential Information

General Information

Auction Dates
Starts: 18 December 2025 at 13:30 GMT
Ends: 28 February 2026 at 15:00 GMT
Site Address
Duisburg
Germany
Viewing Days
By Appointment Only
Viewings by appointment only | Please contact Inquiry@Maynards.com to arrange a viewing appointment

Fees & Payment

Currency
EUR
Buyers Premium
18% or as specified on individual items
Payment

General Payment Information

  • Per bidder, there will only one invoice be issued for all lots won in one auction/sale.
  • The invoice will be in PDF format and will be emailed to successful bidders within 24 hours after the last lot in the auction has closed.  Alternatively, a link will be emailed from where the invoice can be downloaded.
  • Payment is due immediately on receipt of invoice unless stated differently on the invoice.
  • All payments must be made in the currency stated on the issued invoice.
  • The only accepted form of payment is bank transfer.  
  • We DO NOT accept payment by cheque, debit or credit card.
  • Please reference the invoice number on the bank transfer. 
  • For all bidders with residence outside of the country from where the assets are being sold, Maynards Europe will collect 20% of the invoice total as a deposit.  This deposit will be refunded in full after Maynards Europe have received proof of export.
  • It happens frequently that Maynards Europe at first only issue a so-called “proforma invoice”.  After receipt of full payment, collection of the items and receipt of export documentation (if applicable), the final invoice will be issued. 

Goods

Clearance days
01 January 1970 at 01:00 GMT+1 - 01 January 1970 at 01:00 GMT+1
General Collection Information
  • Buyers are fully responsible for the removal of the items purchased including all transport and rigging charges.
  • Items only become available for collection after Maynards Europe have received payment in full, and a collection appointment has been booked with the project manager / on-site contact. 
  • Buyers or third-party movers must present the ‘Paid Invoice’ confirmation to the on-site personnel when collecting and removing their items.  The ‘Paid Invoice’ confirmation will be issued by Maynards Europe after receipt of the full payment and will be emailed in PDF format to the buyer.
  • Buyers must complete the removal of items within the clearance deadline (individually stated for each auction / sale).  Removal is by appointment only.
  • Removal and on-site contact information will be emailed to buyers at the same time invoices are issued.
  • Entrance to the site is subject to the Conditions of Admission for customers, agents and contractors.  For your protection you will be required to wear safety equipment including high visibility jackets and safety footwear as a minimum.  Everybody entering the site has to undergo a short security briefing. 
  • Conditions of Site Admission: All Customers, agents & contractors must report to the site manager / foreman on arrival and must not proceed on to site without permission.  No persons under 16 years of age will be allowed on site.
  • Buyers / Transport Companies must bring their ‘Paid Invoice’ document to site together with proof of appropriate insurance coverage.  It is the buyer’s responsibility to ensure their removal contractor has the appropriate insurance coverage.  As a standard, an insurance cover of 5 million EUR is required.  We reserve the right to deny access to the site if these requirements are not met or the contractor fails to provide proof of this.  If you have any questions on this, please do not hesitate to contact us on +49 8151 973420.
  • There is NEITHER lifting equipment NOR tools for dismantling available on site.  Please make your own arrangements. 
  • Removal of items is solely the responsibility of the purchaser and/or those collecting on their behalf.  This may require you to remove other items to gain access although efforts will be made to keep this to a minimum.  Dismantling of machinery may be required.
  • The buyer and their removal company are responsible for the condition of the site after removal of their goods.  Electrical connections must be left in a safe condition and protrusions (grouting, hold down bolts / studs) must be removed and left flush to ground level.  The site must be cleaned after removal and all waste must be disposed of.
  • The buyer and their removal company are responsible for conducting the removal and transportation of their goods according to the standard environmental regulations. 
  • Removal must be carried out without damage to the site itself or any property/ items on or near the site.  Liability for any such damage lies with the buyer.
  • If items have not been removed by the clearance deadline, our standard Terms & Conditions apply.
  • Our staff are on site to supervise and control removals only, they are not permitted to move equipment or assist with the removal in any way.  We thank you for your cooperation in helping to keep yourself and others safe while on site and for aiding us in the timely removal of goods from site.
Sales Contacts
Auction information
Customer Service Maynards Europe GmbH
Gewerbealle 3
Poecking
82343
Germany

 

+ 49 (0) 8151 1878 400
Timo Kalthoff
Maynards Europe GmbH
Starnberg
82319
Germany

 

+49 8151 1878434