Online Auction | Samsung Electronics SK | Day 2 | Injection Molding & Factory Assets

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


SLP SL, RTS Pallet Rack, year 2018. Rack bay with four beam levels, blue uprights and orange beams, the top level fitted with wire mesh decking. Cell length 3600 mm, 4 cells in column, cell load capacity 2000 kg, column load capacity 8000 kg, with a handwritten label note reading W. 1100, H. 2700.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Bernardo KF 25 D Vario Drilling and Milling Machine, year 2022, serial PWA-2220086. Power 0,6 kW. Supplied with a base cabinet, a drill chuck and a table power feed unit.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


MALOW Work Bench, Metal Cabinet. Work bench with wooden worktop and green mat covering, perforated back panel with hooks and rails, three drawers, open shelf compartments and one lockable door compartment; two-door metal cabinet in blue and grey. Supplied with mesh baskets and blue and red plastic storage bins mounted in the cabinet interior and on its doors.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Milwaukee CHS 355 Cut-Off Saw. Rated at 2300 W, 10.5 A, 220 - 240 V and 50 / 60 Hz, with a no-load speed of n0 = 3800 min-1. Wheel size Ø 355 mm x Ø 25.4 mm.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Grey metal body with blue doors, 3 columns, cam locks with keys. First locker has 7 compartments per column (21 compartments, numbered 2965-2985), second locker has 10 compartments per column (30 compartments, numbered 4004-4033). Dimensions of first unit as handwritten on lot sticker: approx. 90 x 50 x 180.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Each unit has 30 lockable compartments in 3 columns of 10, with blue doors and a grey steel body. Each door has a cylinder lock, and the compartments are numbered 4034-4063 and 4064-4093.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Fitted with 30 lockable compartments in 3 columns of 10, with blue doors, a grey body and key locks. Dimensions approx. 90 x 50 x 180.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Metal Locker. Two-door units with blue doors and grey bodies, each with two compartments fitted with ventilation louvres and twist handle locks. The open compartment shows one shelf and one hanging rail with hooks.

Binding Dismantling/Handling and Loading Fee:
84 € (EURO)


metaloBox Metal Locker Cabinet. Each cabinet has 21 compartments (3 columns x 7 rows), with a grey body and blue doors fitted with key locks. Compartments are numbered 3007-3027 and 2986-3006.

Binding Dismantling/Handling and Loading Fee:
84 € (EURO)


metalobox Metal Locker Cabinet. Configured with 3 columns and 7 rows of lockable compartments, giving 21 compartments per unit, numbered 2944-2964 and 2923-2943.

Binding Dismantling/Handling and Loading Fee:
84 € (EURO)


Metal Locker. Each unit has 21 lockable compartments arranged in 3 columns of 7, with a grey body and blue doors. Compartment numbers run 2902-2922 and 2881-2901.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Metal Locker. Two-compartment construction with blue doors and a grey body, ventilation louvres in the upper and lower door sections, and turn-handle cylinder locks. A shelf is fitted in the upper part of the left compartment, and both doors carry "VIP" labels.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Each cabinet has 3 columns of 10 lockable compartments, 30 compartments per cabinet, with blue doors, cylinder locks and a grey body. Compartment numbers 3854-3883 and 3884-3913.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Comprises 30 compartments in 3 columns of 10, with a grey frame and blue doors fitted with key locks. Compartments are numbered 3764-3793.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Metal Locker Cabinet. Free-standing, with 30 numbered compartments arranged in 3 columns of 10, each compartment having a hinged door and a key lock. The compartment doors carry barcode labels and Czech notice stickers.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Locker units with two compartments each, blue doors and grey body. Cylinder lock handles, ventilation slots and label holders on the doors, with a shelf in the upper part of each compartment.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-door steel construction with blue doors and grey bodies. Doors have ventilation slots, handles with cylinder locks and a card holder. Inside are an upper shelf and hanging space. Numbered labels with barcodes are fitted on top.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-door construction with blue doors and a grey frame. Fitted with ventilation slots, label holders and cylinder lock handles.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Metal Locker. Single-door construction with a blue door and grey body, ventilation slots, a turn handle with cylinder lock and one internal shelf.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Metal Locker. Tall locker with blue doors and a grey body, ventilation slots in the doors and cylinder lock handles. Each compartment has a shelf at the top and a clothes rail.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Metal Locker. Blue doors and grey bodies, with single-door compartments installed in rows. Each compartment has a shelf, a clothes rail, ventilation slots and a turn handle lock.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-compartment construction with blue doors and a grey body, fitted with ventilation slots and a cylinder lock handle. The interior has a shelf and a hanging rail.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-door design with a blue door and a light grey body, ventilation slots in the door and a turn handle with cylinder lock.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-door sheet steel construction with blue doors and grey bodies, ventilation slots in the doors, and padlocks fitted to some doors.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


Metal Locker. Single-door construction with blue doors and a grey carcass. Ventilation slots in the doors, cylinder locks and an internal coat rail.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Metal Locker. Single-compartment locker with a blue louvred door and grey body. Fitted with an upper shelf, a hanging rail with hooks and a door handle with lock mechanism.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Metal Locker. Grey body with blue doors, ventilation slots in the doors and rotary handle latches. Each compartment is fitted internally with a shelf and a coat rail.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Roller Conveyor. Motor-driven, with a steel frame and adjustable feet. Supplied with control boxes with emergency stop switch, fitted to some units.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Lifter Conveyor System. Glass-enclosed lifter frames with servo motors, sprocket shafts and yellow guard housings, and belt conveyor sections with emergency stop switches, partly dismantled on pallets. Supplied with two control cabinets labelled SKY C/V PANEL UP L/F-43"-55" and DOWN L/F-43"-55", and a pallet with chain carriers.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Stretch Wrapping Machine, year 2007, serial 64839. Rated at 400 V, 3 phase, 50 Hz, with a current of 5,2 A and a power of 1440 W. Recorded as type 16-PW-4CF+, part number FAMWSSEMIAUTO.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Stretch Wrapper, year 2006, serial 55474. Turntable machine with mast, type 16-PW-4CF+, part number FAMWSSEMIAUTO, rated 400 V, 3 phase, 50 Hz, 5,2 A and 1440 W. Supplied with a signal light tower.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Pallet Stretch Wrapper, year 2007, serial 64848. Comprises a turntable with roller conveyor, a mast with film carriage and a control panel. Rated at 400 V, 50 Hz, 3 phase, with a current of 5,2 A and a power of 1440 W.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Chain Belt Roller Conveyor. Steel construction, chain driven, with geared motors. Recorded dimensions are approx. 2500 mm x 1650 mm and approx. 2000 mm x 1700 mm.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Belt Conveyor. Continuous rubber belt conveyors on tubular frames, each fitted with an emergency stop button and an isolator switch. Unit dimensions approx. 1650 mm x 1100 mm x 900 mm.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Automatic Voltage Regulator, SHINWOO POWER TECHNOLOGY CO.,LTD., year 2025, serial 2502C12909. Rated at 150 kVA with 97% efficiency, input 3 Ø 3 W 400 V (± 10%), 50 Hz and output 3 Ø 3 W 220 V (± 2%), 50 Hz at 393.7 A. Analogue meters, phase selector switches and a selector switch (OFF, AUTO, Bypass Manual); mounted on casters, dimensions approx. 1100 mm x 850 mm x 1360 mm.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


TIAC SX - 100 Automatic Voltage Regulator, year 2022, serial 221135050365. Capacity 3Ø 50 KVA, input 3Ø 3W 380 V ±15 %, 50 Hz, output 3Ø 4W 220 V ±2 %, 50 Hz, output current 131 A, efficiency 90 % min., digital tap changing, dimensions approx. 700 mm x 700 mm x 1300 mm. Supplied with a User's Handbook (TIAC).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


TIAC SX - 100 Automatic Voltage Regulator, year 2022, serial 22113S050366. Capacity 3Ø 50 KVA, with input 3Ø 3W 380 V, ±15 %, 50 Hz and output 3Ø 4W 220 V, ±2 %, output current 131 A. Efficiency 90 % min., Digital Tap Changing, with analog meters, an AVR/Bypass switch and an input circuit breaker.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


Belt Conveyor. Foam continuous belt conveyor with an aluminium frame, unit dimensions approx. 1150 mm x 1700 mm x 930 mm and belt dimension approx. 400 mm.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Stretch Wrapping Machine, year 2007, serial 64847. Part number FAMWSSEMIAUTO, type 16-PW-4CF+. Rated at 400 V, 3 phase, 50 Hz, with a current of 5,2 A and a power of 1440 W.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Pallet Stretch Wrapping Machine, year 2007, serial 64483. Rated at 400 V, 50 Hz, 3 phase, with a current of 5,2 A and a power of 1440 W. Recorded type 16-PW-4CF+, part number FAMWSSEMIAUTO.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Pallet Wrapping Machine, year 2007, serial 64842. Operator panel with manual mode keys, programme selection P1 to P4, emergency stop and main switch, with panel labels in Slovak. Electrical data: 400 V, 3 phase, 50 Hz, 5,2 A, 1440 W.

Binding Dismantling/Handling and Loading Fee:
180 € (EURO)


ESD PCB Storage Racks. Black ESD circuit board magazine racks with metal support rails and slotted side panels, mounted on castor trolley bases. Partly stacked two high and wrapped in stretch film.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Transfer Conveyor. Frame with polycarbonate enclosure panels and an overhead linear handling unit with suction grippers; control cabinet with main power AC220V and an Auto / Teach safety mode key switch. Supplied with a control cabinet and a Pro-face touch screen operator panel.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Transfer Conveyor. Long frame unit with transparent side panels, overhead linear gantry axis with multi-finger gripper carriage, energy chain and machine-mounted emergency stop, with a control cabinet on main power AC220V and an Auto / Teach safety mode selector. Supplied with (2) control cabinets, (1) Pro-face touch panel and (1) emergency stop box.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M 16-PW-4CF+ Pallet Wrapping Machine, year 2007, serial 64945. Fitted with a round turntable, a mast with film carriage, and an operator panel with main switch and emergency stop. Rated at 400 V, 50 Hz, 3 phase, 5,2 A and 1440 W, with a power cable and CEE plug.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Pallet Stretch Wrapper, year 2007, serial 64944. Turntable stretch wrapper with mast and film carriage, type 16-PW-4CF+, part number FAMWSSEMIAUTO. Rated voltage 400 V, 50 Hz, 3 phase, current 5,2 A, power 1440 W.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2 Pallet Wrapping Machine, year 2017, serial SWSEMIAUTO047750025. Fitted with a rotating turntable, a mast with film carriage, and a control panel with emergency stop button and signal light. Rated at 220-240 V, 50-60 Hz, single phase, 5.2 A and 1440 W.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


SIAT SW2M Pallet Wrapping Machine, year 2007, serial 64838. Rated at 400 V, 50 Hz, 3 phase, with a current of 5.2 A and a power of 1440 W. Supplied with a turntable.

Binding Dismantling/Handling and Loading Fee:
84 € (EURO)


Shimadzu EDX-720-P Energy Dispersive X-Ray Spectrometer, serial Q23844800002 AE. Rated voltage 220-240V ~, 50-60Hz, max. 1000VA. Supplied with an Edwards vacuum pump, an X-ray warning light and a plastic standard sample set (PE-1E4G, Sb, LDPE).

Binding Dismantling/Handling and Loading Fee:
300 € (EURO)


Container.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Steel Mobile Trolley. Steel frame with two wooden shelves, mounted on swivel casters, with dimensions of approx. 1400 mm x 700 mm x 1250 mm.

Binding Dismantling/Handling and Loading Fee:
540 € (EURO)


MATEOS CALIBRATION Linear Positioning System, year 2022, serial 021. Horizontal linear track with vertical mast on castors, marked "WALL-E" and fitted with cable chains, track dimensions handwritten on the lot sticker as 4000m x 2000m. Supplied with a Rittal control cabinet, a Mitsubishi Electric touch panel and a signal light.

Binding Dismantling/Handling and Loading Fee:
144 € (EURO)


LKLAB KOREA LO-FS250 Forced Convection Oven, serial U100064. Rated at 220 Vac, 60 Hz, 11.9 A, with a PID control system, digital timer function, over temperature safety dial, emergency stop button and a stainless steel interior with a door viewing window. Supplied with (4) wire shelves.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


LKLAB KOREA LO-FS150 Forced Convection Oven, serial V110024. Rated at 220 VAC, 60 Hz and 8.2 A, made in Korea. Supplied with a wire shelf.

Binding Dismantling/Handling and Loading Fee:
264 € (EURO)


Lansmont Drop Tester, year 2008, serial MJ5175. Vertical drop tower with motor hoist at the top and impact base plate, rated 230 V and carrying CE marking. Supplied with a control cabinet, a handheld remote control (Lansmont Field-to-Lab) and an operation and maintenance manual (Team Corporation, Dynatek/Samsung IPC).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


ADE Engineering AD-29 Salt Spray Tester. Voltage 1Φ 220V AC, power 2KW, chamber temperature 35°C (±2°C), saturator tank temperature 47°C (±2°C) and pressure range 0.07-0.17MPa (sticker), with Autonics TZN4S temperature controllers and an Autonics CT4S-1P timer. Supplied with a control box with a Mitsubishi Electric GOT2000 touch panel.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


smipack SL 45 Shrink Wrapping Machine, year 2013, serial 42996. Electrical data: AC input 1PH+N+PE 220-240, frequency 50-60 Hz, power 1650 W, current 7 A. Code ZA440004, made in Italy.

Binding Dismantling/Handling and Loading Fee:
900 € (EURO)


Team HPS-65 Vibration Test System, serial 660. Comprises a hydraulic power supply with electric motor, a hydraulic manifold with pressure gauges, a control cabinet, a control rack and a floor-mounted vibration table. Supplied with a Team 1510-D hydraulic power supply controller, a Team 2240 voice coil valve driver, a Team HPS-PLC control box and a Young Touchstone heat exchanger.

Binding Dismantling/Handling and Loading Fee:
108 € (EURO)


Lansmont PDT80 Drop Tester, serial 18639. Fitted with vertical guide columns, an overhead hoist assembly and a base plate.

Binding Dismantling/Handling and Loading Fee:
180 € (EURO)


SESK ESD Magazine Rack. Slotted magazine racks with black ESD-dissipative side panels and galvanised frames, marked with the ESD symbol. The racks are partly stacked on castor trolleys.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


UBTECH XCAD101 Automated Guided Vehicle, serial DAQ003UBT30000089. Input voltage DC 25.6 V; product size approx. 550 (L) x 485 (W) x 1285 (H) mm; fitted with a display screen, an emergency stop button and multi-level shelves. Supplied with a power adapter with power cable and a documentation set in a plastic bag on the top tray.

ENGEL DUO DUO 11050H/7050M/1700 Combi Injection Molding Machine, year 2009, serial 170627. Two-platen design with two injection units and a turning platen, weight 25.000 kg, hydraulic oil filling 3000 l of mineral oil ISO VG 46, DIN 51524 HLP. Supplied with a Yudo-Star handling robot, a Yudo YUCON-400 control cabinet, Yudo mold temperature controllers, two hopper loaders and a QMC quick mold change control box.

Dismantling, Handling and Loading can be offered and quoted upon request.

ENGEL DUO 11050H/7050M/1700 Combi Injection Molding Machine, year 2009, serial 170626. Fitted with two injection units, a moving platen, a turning platen, a stationary platen and an ENGEL Access Card control panel with touch screen; weight 25.000 kg. Supplied with a Yudo-Star MEGA-2000-2P take-out robot, a Yucon-400 robot control cabinet and a Solutech C&C QMC System.

Dismantling, Handling and Loading can be offered and quoted upon request.

ENGEL DUO 23050H/11050M/2300 Combi Injection Molding Machine, year 2009, serial 171604. Fitted with two injection units, an operator panel with access card reader and a quick mold change panel, with a recorded weight of 32 000 kg. Supplied with a YUDO-STAR MEGA-2500-2P take-out robot, a YUCON-400 robot controller, a YUCON-500 handheld pendant, Yudo and Yudo-Suns mold temperature controllers, and material hoppers.

Dismantling, Handling and Loading can be offered and quoted upon request.

ENGEL DUO 2300 2F CLS Injection Molding Machine, year 2008, serial 166130. Two-platen machine with two injection units, marked Unit 1 and Unit 2, weighing 140.000 kg (plate on machine enclosure) and 32.000 kg (second plate), with a hydraulic system oil filling of 3600 l, ISO VG 46 mineral oil. Supplied with a Yudo Giga 3525 4P take-out robot, a Yudo Yucon 700 robot control cabinet, two material hoppers with loaders and a handheld operating terminal.

Dismantling, Handling and Loading can be offered and quoted upon request.upon request.

ENGEL DUO 11050H/7050M/1700 Combi Injection Molding Machine, year 2008, serial 168251. Fitted with two injection units labelled Agg. 1 and Agg. 2, weight 25.000 kg, hydraulic oil filling 3000 l of mineral oil ISO VG 46, DIN 51524 HLP. Supplied with a Yudo-Star MEGA-2000-2P take-out robot, Yudo control cabinets and a Solutech C&C QMC System.

Dismantling, Handling and Loading can be offered and quoted upon request.

ENGEL DUO 11050H/7050M/1700 Injection Molding Machine, year 2008, serial 168248. Weight 25.000 kg, hydraulic system oil filling 3000 l of mineral oil ISO VG 46 (DIN 51524-2 HLP), control cabinet 3/PEN AC 400/230 V, 50 Hz, TN-C-S. Supplied with a Yudo MEGA-2000-2P take-out robot, a Yudo material hopper loader, temperature controllers and a Solutech C&C QMC quick mold change system.

Dismantling, Handling and Loading can be offered and quoted upon request.

ENGEL DUO 23050H/11050M/3200 Injection Moulding Machine, year 2008, serial 168162. Two injection units labelled AGG. 1 and AGG. 2; weight 25.000 kg; hydraulic oil filling 3000 l, mineral oil ISO VG 46, DIN 51524-2 HLP. Supplied with a Yudo-Star MEGA-2500-2P gantry frame with platform and ladder, a hopper loader and Yudo twin temperature control units.

Dismantling, Handling and Loading can be offered and quoted upon request.

Binding Dismantling/Handling and Loading Fee:
300 € (EURO)


Storage Hopper. Three-compartment hopper on a steel frame, with compartments marked C1, C2 and C3, each having a conical outlet and inspection windows. The outlets are connected to flexible conveying hoses. Supplied with 3 conveying hoses.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Shini SHD-1500U-SL-CE Resin Dryer, year 2018, serial 2HU00001227. Insulated hopper with SHD-U Power Dryer controller, manual discharge valve and mounted blower, 35000 W, 3 Ø 400 V, 50 Hz, weight approx. 495 KG, dimensions approx. 105*141*217 CM. Supplied with a Shini SHD-U control cabinet, a blower with motor on mobile frame, two electrical enclosures and a steel support frame with platform and ladder.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


Shini SHD-1500U-SL-CE Resin Dryer, year 2018, serial 2HU00001228. Rated at 35000 W, 3~ / 400 V, 50 Hz, version C, with approx. weight 495 KG and approx. dimensions 105*141*217 CM. Supplied with a steel support frame with platform, railing and cage ladder, an OuGuan blower on trolley, a Shini control box with display, a control cabinet with main switch, an insulated cabinet and a material loader.

Binding Dismantling/Handling and Loading Fee:
660 € (EURO)


SHINI SHD-1500U-SL-CE Hopper Dryer, year 2018, serial 2HU00001229. Fitted with an SHD-U Hopper Dryer Controller and main switch, with an insulated hopper, rated 35000 W on 3 Ø 400 V, 50 Hz, weight approx. 495 KG and dimensions approx. 105*141*217 CM. Supplied with a blower with motor (Type JZ100L-2) on trolley and a steel support frame.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Shini SD-2000H-LC-D-CE Dehumidifying Dryer, year 2018, serial 2DH00000377. Control cabinet with Schneider Electric Magelis touch panel and main switch. Power 59500 W, 3~ / 400 V, 50 Hz, version E. Dimensions 215*141*206 CM, weight 937 KG.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Shini Resin Dryer, year 2015, serial 2DU15070020. Fitted with a Schneider Electric Magelis touchscreen control panel and connecting hoses, version B, 3~ / 400 V, 50 Hz, power 31200 W, weight approx. 725 KG, dimensions approx. 174*126*261 CM. Supplied with a drying hopper and a steel stand.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Shini Resin Dryer, year 2016, serial 2DU16100022. Power 31200 W, 3~ / 400 V, 50 Hz, version B. Weight approx. 725 kg, dimensions approx. 174*126*261 CM. Supplied with a Schneider Electric Harmony touch screen panel.

Binding Dismantling/Handling and Loading Fee:
180 € (EURO)


Shini Resin Dryer, year 2015, serial 2DU15070019. Stainless steel drying hopper on a mobile stand, with a control cabinet fitted with a Schneider Electric Harmony touchscreen. Power 31200 W, 3 Ø 400 V, 50 Hz, weight approx. 725 KG, dimensions approx. 174*126*261 CM.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


Moretto FC40CPB Filter Unit, year 2015, serial 1514772. Recorded data: voltage 24DC, power 0,01 kW and weight approx. 112 kg. Supplied with a Moretto blower unit with control cabinet.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


MORETTO Filter Unit. Stainless steel separator column with pressure gauge, mounted on a blue steel frame with castors, and a side channel blower on a separate blue frame. Control cabinet with touchscreen operator panel. Supplied with a side channel blower and a control cabinet with an Omron touchscreen operator panel.

Binding Dismantling/Handling and Loading Fee:
960 € (EURO)


Plastic Systems D820P CS TCHC Resin Dryer, year 2016, serial 10022074. Weight approx. 1650 kg, rated voltage 3~ / 400 V, 50 Hz, nominal power 47.5 kW, total load current 83 A, degree of protection IP 54. Supplied with (3) drying hoppers, and (1) support frame with platform.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8800 Video Signal Generator, serial KGE206, KGE208, KGE166, KGE154. Front panel with display, USB port, card slot and keypad; rear panel with plug-in module slots, Displayport, HDMI, analog, CVBS, Y/C, component, USB, RS-232C, IR and remote connections. Rated voltage 100 - 240 VAC, 50/60 HZ, fuse T2AL250V.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Video Signal Generator, MIK21 CO., LTD. K-8800, serial KGE204, KGE167, KGE209, KGE158, KGE164. Programmable, with front display, USB port, card slot, keypad and rotary knob; rear chassis with seven slots fitted with HDMI, DisplayPort, DVI-D, BNC and analog interface modules, varying by unit. Rated voltage 100 - 240VAC, 50/60HZ. Supplied with an Audio Box (MIK K-8800AB).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Video Signal Generator, MIK21 CO., LTD. K-8800, serial KGE207, KGE156, KGE165, KGE155, KGE157. Programmable unit with display, keypad, USB port and memory card slot, with seven slots and rear connections for DisplayPort, RS-232C, Remote and IR. Rated voltage 100 - 240 VAC, 50/60 Hz, fuse T2AL250V.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8800, K-270L Video Signal Generator, LCM Tester, serial K-8800: KGE173, KGE205, KGE203; K-270L: KLT467, KLT540. Video Signal Generator rated 100 - 240 VAC, 50/60 Hz, fuse T2AL250V; Multi Signal LCM Tester rated 100-240VAC, 50/60 Hz, fuse T5AL250V. Rear panels show Displayport, HDMI, RS-232C, Remote and IR connections.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


MIK K-270L Multi Signal LCM Tester, serial KLT294, KLT436, KLT537, KLT438, KLT539. Input 100-240VAC, 50/60HZ, with fuse T5AL250V. Front panel marked Programmable Video Signal Generator and Quad LVDS; rear connectors LVDS Slave, LVDS Master, Remote, RS-232C and Power.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


KUKA SEMD Justage Set / SEMD/MEMD Justageset Electronic Mastering Set. Set 1 carries article number AN 00-228-936 and Set 2 AN 00-228-934; the Universal Mastering Box is AN 00-228-862 and the SEMD Sensor 00-228-930. Supplied with two carrying cases, two Universal Mastering Boxes, two SEMD Sensors and two connecting cables.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Olympus IV8420L2 Industrial Videoscope, serial Y203665. Insertion tube diameter 4.0mm, length 2.0m (case label), with PAL video standard, AC adapter input 12V DC, 11W and battery input 10.8V DC, 11W. Supplied with a carrying case, a handheld control unit with insertion tube, an AC adapter with power cable and an instruction manual.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Master MSPG - 5400QL Programmable Video Pattern Generator, serial M0P9G1294, M0P9G1295, M0P9G1296. Front panel with touch screen, keypad, Easy Jog / Enter dial and USB port; rear panel with RS-232C, Remote, LAN, LVDS-CH1 and LVDS-CH2 connectors. Touch screen, LVDS / Quad, input 100-240V~, 50/60Hz, 1.5A.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Creaform HandySCAN 700 Handheld 3D Scanner, year 2017, serial 662037. Rated 18 V DC at 0.8 A, made in Canada, and a laser product complying with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007. Supplied with a transport case and a cable set with mains plug.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


ShibaSoku TG39AC Multi Test Signal Generator, serial 3000016703. Equipped with Video, Sound MPX, Teletext and RF sections and an RS-232C interface. Rated voltage AC 90-130/180-250 V, frequency 50/60 Hz, power 180 VA, 1 phase + PE, fuse 3 A, 250 V, Type T, weight 11 kg.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


ROHDE&SCHWARZ SFE100 Test Transmitter, serial 132729. Rack-style bench unit with front display, keypad, USB ports and RF output connector, RF output 50 Ω. Rear panel connectors are labelled Video In, Audio Aux, Dig I/Q In, 1PPS/Trig, Ref In, TS1 In, TS2 In, USB and Network Port.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Eiden SSR5000A DTV Signal Generator, serial DC131633, DC131634. Rated voltage ~ 100-240 V (±10%), frequency 50/60 Hz, max. power 72 W, fuse T3.15A/250V, RF output impedance 50 Ω. Rack-mount unit with front panel display, two USB ports and VGA port, made in Japan.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Master MSPG-5100 Quad LVDS Pattern Generator, serial M1P2G0114, M1P2G0115, M1P2G0116. Bench unit with touchscreen, function keys and front USB port. Rear interfaces: RS-232C, LAN, Remote, Debug and 2 LVDS output channels (CH 1, CH 2). AC input 100-240V~, 50/60Hz, with F 3.15A 250V fuse.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


EIDEN 198B TV Multi Sound Encoder, serial DF 90319. Rack-mount unit with analog level meter, and a heat sink and fan on the rear panel. Recorded data includes a voltage selector of 100 V / 110 V / 200 V / 240 V, composite output 5.85MHz, CW input 38.9MHz (90dBµV) and bit clock 728kHz.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


LAON PEOPLE LPMYC-CL50M Industrial Camera, serial LPV48K10001. Fitted with a cooling fan on the rear, with a lens of 35 mm focal length and 1:1.4 aperture. Supplied with a Samyang 35 mm 1:1.4 lens, a mounting bracket, a tripod with 3-way pan head, an aluminium transport case and a set of cables.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


EIDEN 4013A Wide Band Boost Amplifier, serial GL112149, FC101825, GH106986, GD105886. Rack-mount unit with front panel power switch, fan alarm and over indicators, level adjustment, and RF input and RF output connectors. Supply voltage ~90-250V, mains switch rating 2A, RF input label -10dBm at DTV use. Made in Japan.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Eiden 4013A Wide Band Boost Amplifier, serial GG106662, GL112148, EE94282, DF90406. Rack-mount units with front power switch, fan alarm indicator, over indicator, level adjust, RF input connector, RF output connector and rear cooling fan, for a supply voltage of ~90-250V.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Eiden 4013A Wide Band Boost Amplifier, serial GD105887, GL112151, FC101824, HB112897. Rack-mount units with power switch, fan alarm and over indicators, level adjustment, and RF input and RF output connectors on the front panel, with a fan on the rear panel. Input voltage ~90-250V; rear switch marked 2A.

Binding Dismantling/Handling and Loading Fee:
120 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B 1112675, B 1112680, B 1112553, B1108952, B1105649, B1104836, B1106648, B1107657, B1109185, B1107656. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz. Supplied with a crate of measuring probes (Konica Minolta CA-PU12/15).

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


WON-TECH BRK-2001 BGA Reballing Kit. Adjustable BGA component reballing fixture in an aluminium-framed carrying case with foam inserts. Supplied with a reballing fixture with micrometer, tweezers, a brush and a manual.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Yokogawa WT210 Digital Power Meter. Supply 100-240V AC~, 50/60Hz, with power consumption of 35VA MAX and a 250V T 1A fuse. Current input 20A MAX, voltage input 600V MAX. Interfaces: GP-IB (IEEE488) and SERIAL (RS-232-C).

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Rohde&Schwarz ESPI EMI Test Receiver. Frequency range 9 kHz ... 3 GHz, order number 1164.6407.03. Rated voltage 100-240VAC, current 3.1-1.3A, frequency 50-400Hz.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


ROHDE&SCHWARZ ENV216 Two-Line V-Network, serial 102179. Equipment under test is rated at max. 16 A, with an input of 0 ... 240 V AC / 50 ... 60 Hz or 0 ... 50 V DC. The RF output is 50 Ω and the external power supply is 10 ... 18 V DC, 250 mA. Item ID 3560.6550.12.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


METTLER TOLEDO HB43-S Halogen Moisture Analyzer, serial 1123411021. Capacity 54 g, readability d = 0.001 g, 200-240V, 2A, 50/60Hz, made in Switzerland. Supplied with a sample pan handler.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Konica Minolta CS-3000HDR Spectroradiometer, serial 3001154. DC input 12V, 3A, with RS-232C, USB and EXT (V.SYNC) interfaces; made in Japan. Supplied with an AC adapter and a lens with protective cap.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Konica Minolta CS-100 A Chroma Meter. Handheld unit with lens, LCD display and pistol grip, with switches for Calibration Preset / Vari., Measuring Mode Abs. / Diff. and Response Fast / Slow. Supplied with a transport case with foam insert, a carrying strap, a wrist strap and a lens cap.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Yokogawa WT210 Digital Power Meter. Supply 100-240V AC, 50/60Hz, with power consumption of 35VA max. and a 250V T 1A fuse. Current input 20A max., voltage input 600V max., CAT II, with GP-IB (IEEE488) and serial (RS-232-C) interfaces.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Yokogawa CA71 Handheld Calibrator, serial T1GB027. Measure ranges are 300V ~, 100V, 10V, 1V, 100mV TC, Ω RTD, FREQ 30Vmax and mA; source ranges are 30V, 10V, 1V, 100mV TC, 400Ω RTD, PULSE, 20mA, 4-20mA and 20mA SINK. Supplied with a carrying case, user's manual (Yokogawa IM CA71-E), set of measuring leads, power adapter and set of connector adapters.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Compass Systems FPS16SYSTEM Production High-Speed Programmer, serial FPS0012G16. Fitted with 16 sockets and a USB 2 interface, made in Korea. Supplied with a set of socket adapter boards fitted to the programming sockets, four socket adapter boards on a foam pad (2x FIII-SO8, 2x FIII-153BG-M) and a bag of socket adapter boards.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321258, AAP190321423. Rated for a maximum of 5KV AC and 6KV DC, it is a bench-top unit with twin ports, Scan and RS232 interfaces. Calibration labels (HES, s.r.o.) are valid until 15.1.2027.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321308, AAP190321036. Twin Ports version with high voltage output max 5 kV AC / 6 kV DC. Line voltage selector settings of 90V-110V~, 108V-132V~, 198V-242V~ and 216V-250V~; interfaces Scan and RS232; pollution degree 2, installation category II.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321552, AAP190321041. Maximum output voltage 5 kV AC / 6 kV DC, with twin ports design and rear interfaces GPIB (slot without module), Scan and RS232. Each unit carries a HES s.r.o. calibration sticker, unit AAP190321552 calibrated 13.1.2026, valid until 13.1.2027, unit AAP190321041 calibrated 14.1.2026, valid until 14.1.2027.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321054, AAP190320561. High voltage output is max 5KV AC / 6KV DC. Fitted with GPIB, Scan and RS232 interfaces on the rear panel and marked Twin Ports on the front panel.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190320989, AAP190321002. Twin Ports model with output max 5KV AC / 6KV DC and line voltage ranges of 90V-110V, 108V-132V, 198V-242V and 216V-250V. Interfaces are SCAN and RS232, with calibration stickers (HES, s.r.o.) valid until 14.1.2027 and 13.1.2027.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321344, AAP190320998. Twin ports, with output max. 5 kV AC / 6 kV DC and line voltage selector ranges 90V-110V, 108V-132V, 198V-242V and 216V-250V. Each unit has a numeric keypad, Stop and Start buttons, and GPIB (slot without module), SCAN and RS232 connectors on the rear panel.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Chroma 19032 Electrical Safety Analyzer, serial AAP190321034, AAP190321010. Maximum output voltage 5KV AC / 6KV DC. Line voltage 90V-110V~ and 108V-132V~ with 8AT 250V fuse, or 198V-242V~ and 216V-250V~ with 4AT 250V fuse. Units carry calibration labels of HES, s.r.o. Calibration Laboratory, valid until 15. 1. 2027.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268, K-8258 Programmable Video Signal Generator, year 09.2005, serial KGE181, KGE434, KGE393, KGE061. Front panel with LCD display, keypad, memory card slot and USB port; rear panel with HDMI, DVI-I, analog, BNC, SCART, RS-232C and USB connections. Rated input power 100-240VAC, 50/60HZ, 600mA(MAX), fuse T2AL250V.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268 Programmable Video Signal Generator, year 09.2005, serial KGE1671, KGE1373, KGE197, KGE016. Front keypad, LCD display, memory card slot and USB port. Rear panel with HDMI 1-3, DVI-I, analog, BNC, optical input, SCART, RS-232C and USB connections. Rated voltage 100-240 VAC, 50/60 Hz, fuse T2AL250V.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268 Programmable Video Signal Generator, year 2005, serial KGE013, KGE228, KGE1365, KGE1698. Rated voltage 100-240 VAC, 50/60 Hz, with fuse T2AL250V. Calibration stickers dated 14.1.2026 (valid until 14.1.2027) and 13.1.2026 (valid until 13.1.2027).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268 Programmable Video Signal Generator, year 2005, serial KGE211, KGE1662, KGE1669, KGE429. Front panel with LCD display, keypad, memory card slot and USB port. Rear panel with HDMI 1-3, DVI-I (Single and HDCP), DVI-I (Dual), analog, optical input, RS-232C, USB, remote, monitoring and tester set connections. Rated voltage 100-240 VAC, 50/60 Hz.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268 Video Signal Generator, year 09.2005, serial KGE010, KGE177, KGE302, KGE528. Programmable, with HDMI Ver 1.3, LCD display, keypad, memory card slot and USB port on the front panel. Rear panel with 3 HDMI ports, DVI-I (Single & HDCP), DVI-I (Dual), BNC connectors, RS-232C and Scart sockets; rated voltage 100-240VAC 50/60HZ.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


MIK K-8268 Programmable Video Signal Generator, year 2005, serial KGE012, KGE381, KGE035, KGE1372. Front panel with LCD display, keypad, memory card slot and USB port. Rear connections: 3 x HDMI, DVI-I (Single & HDCP), DVI (Dual), Analog, Optical Input, Y/C, CVBS, Y/Pb/Pr, D Terminal, Monitoring, Tester Set, Remote, USB and RS-232C. Rated voltage 100-240VAC, 50/60HZ.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


MIK K-8268 Programmable Video Signal Generator, year 2005, serial KGE311, KGE200, KGE1371. Features Caption/Teletext/Media Player HDMI function, keypad, LCD display, memory card slot and USB port. Rear connections: 3 HDMI, DVI-I (Single & HDCP), DVI-I (Dual), Analog, RS-232C, USB, Remote. Rated voltage 100-240 VAC, 50/60 Hz.

Binding Dismantling/Handling and Loading Fee:
120 € (EURO)


datamax·o'neil H-4408 Label Printer, serial 41530016, 34730067, 42330035, 64130119, 54030025, 34730068, 52530019, 52530020, 54030023. Rated voltage 115-230 VAC, 50-60 Hz, with a current of 3.0-1.5A, from the H-CLASS family.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Tokyo Measuring Instruments Lab. DC-204R Dynamic Strain Recorder, serial D0A1371363. Four measuring channels, CH.1 to CH.4 (CH.1 with Remote Sense), a memory card slot, power input DC10V-16V, 0.4A MAX, and USB, Control IN and Control OUT interfaces. Supplied with an aluminium carrying case, operation manual (DC-204R/204Ra), power supply unit, USB cable, terminal block connectors and a GBDriver memory card.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


ION Systems 280A Digital Charged Plate Monitor, serial 61948. Fitted with an LCD display, plate voltage bar display, range selector, analog output, and temperature and humidity sensors, with a rated voltage of 100-240 VAC, frequency of 50-60 Hz and power of 30 Watts Max. Supplied with a transport case with foam inlay and a set of cables.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Radiant Vision Systems IP-PMY16 Photometer, serial 9276080. Labelled ProMetric, made in USA, with a resolution of 16M Pixel. Supplied with a transport case, a power supply, a power cord, an Ethernet cable and a software CD (TrueTest 1.6).

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Tektronix TDS5054 Digital Phosphor Oscilloscope, serial B051580. Four channels with a touch screen and auxiliary input, bandwidth 500 MHz and sample rate 5 GS/s. Inputs CH 1 - CH 4: 150V CAT I, 1M Ω 18pF, or 50 Ω, ≤5V RMS; input AUX IN: <20 V pk, 1.5KΩ.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Tektronix MTX100B MPEG Recorder & Player, serial B010232, B010233, B010236, B020551. Benchtop unit with colour display, 2 front USB ports and carrying handle. Rear panel interfaces: ASI In, ASI Out, SPI In/Out, IEEE 1394b, VGA and LAN. Rated voltage 100-240 V, 50/60Hz; power consumption 180 VA. Supplied with ASI Interface Module (Option 01).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Tektronix MTX100B MPEG Recorder & Player, serial B010234, B010237, B010278, B010231. Front panel with display, menu keys, navigation keys and 2 USB ports. Rear panel with ASI In, ASI Out, SPI In/Out, Clock/Ref In, IEEE 1394b, VGA, LAN and Com connections. Option 01, supply voltage 100-240 V, 50/60Hz, power 180 VA.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Tektronix MTX100, MTX100A MPEG Recorder & Player, serial J320199, J320197, B010296. Rated voltage 100-240 V, 50/60 Hz, with power consumption of 120 VA. Rear interfaces: ASI In/Out, SPI In/Out, Trig In, Clk/Ref In (0 dBm), SCSI, COM2, Printer, VGA and 100/10 BASE-T; front panel with display, 2 USB ports and optical drive.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Teledyne LeCroy 980B Advanced Test Platform, serial 19020002. Portable unit with integrated touchscreen display and carrying handle, Quantum Data Series, part number 00-00231, revision N, rated 100-240 VAC, 50/60 Hz, 175 VA Max, calibrated 01 February 2019 with calibration due 01 February 2020. Supplied with an HDMI 2.1 Board (95-00156) and an HDMI 2.1 Generator (95-00158).

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Teledyne LeCroy 980B Test Platform, serial 19020001. Plate designation Quantum Data 980B Advanced Test Platform, part number 00-00231, revision N, with installed options 95-00156 HDMI 2.1 Board and 95-00158 HDMI 2.1 Generator. Rated voltage 100-240 V AC, 50/60 Hz, power consumption 175 VA Max.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Tektronix TDS 3032C Digital Phosphor Oscilloscope, serial TDS3032C C013385, TDS3032C C013392, TDS3032C C013394. Bandwidth 300 MHz with a sample rate of 2.5 GS/s. Channel 1 and 2 inputs 1 MΩ, 13 pF, ≤150 VRMS CAT I. Supply voltage 100 V~ to 240 V~ (±10%), line frequency 47 Hz to 440 Hz, power consumption 75 Watts maximum.

Binding Dismantling/Handling and Loading Fee:
36 € (EURO)


Tektronix TDS 2012B Digital Storage Oscilloscope, serial C056355, C056366. Two channel, with a bandwidth of 100 MHz and a sample rate of 1 GS/s. Supply 100-240V, 50-60Hz or 115V, 400Hz, power 30 WATTS, input rating 300V CAT II.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Konica Minolta CA-310 Display Color Analyzer, serial B 1105620, B 1105740, B 1106826. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz, with USB, RS-232C and EXT (V.SYNC) interfaces. Supplied with Measuring Probe (Konica Minolta CA-PU32/35).

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Konica Minolta CA-310 Display Color Analyzer, serial B 1105658, B 1105642, B 1105589, B 1301220. Bench-top units with front keypad and display, rated voltage 100-240V~, power consumption 50VA, frequency 50-60Hz. Supplied with Konica Minolta CA-310 measuring probes.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Konica Minolta CA-310 Display Color Analyzer, serial B 1105697, B 1104536, B 1105454. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz, with USB, RS-232C and EXT (V.SYNC) interfaces. Supplied with three Probes (CA-310 Standard Probe) and one Expansion Board (CA-B15).

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Konica Minolta CA-310 Display Color Analyzer, serial B 1104504, B 1104365. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz, made in Japan. Measuring probe calibrated on 15.08.2025, calibration valid until 15.02.2026, calibration laboratory SESK. Supplied with (2) Konica Minolta CA-PU32/35 measuring probes.

Binding Dismantling/Handling and Loading Fee:
24 € (EURO)


Konica Minolta CA-310 Color Analyser Probe. Small type probe, designation on probe housing CA-PSU32/35, fitted with a measuring hood and connecting cable. Supplied with a connecting cable.

Binding Dismantling/Handling and Loading Fee:
12 € (EURO)


Konica Minolta CA-310 CA-P32/35 Color Analyser Probe. Master probe label A3CT-0005-75 and barcode label 0GBA-Y51942 are recorded. Supplied with connecting cables.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


Shimadzu IRAffinity-1S FTIR Spectrophotometer, serial A21965301193LP. Catalogue number 206-30500-58, rated voltage 220V/230V/240V~, 50/60Hz, power consumption 150VA, fuse type T 4.0A, Class 1 Laser Product. Supplied with a Single Reflection ATR Accessory (Shimadzu MIRacle 10), a power cable and a connection cable.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Hirox KH-7700 Digital Microscope, serial 0491310. Fitted with a fold-up monitor, front control panel, USB ports and disc drive, rated 100-240 V~, 50/60 Hz, 2.5-1.0 A. Supplied with a Hirox microscope stand with XY stage, a Hirox MXG-5040RZ lens with encoder mount, a Hayashi Luminar Ace LA-HDF158A light source, a Hirox CT-101 motor controller and a keyboard.

Binding Dismantling/Handling and Loading Fee:
48 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1104911, B 1112659, B1102330, B1103391. Rated voltage 100-240V~, frequency 50-60Hz, power consumption 50VA, with USB, RS-232C and EXT (V.SYNC) interfaces and measuring ports P1 to P5. Supplied with (8) Measuring Probes (Konica Minolta CA-210 CA-PU12/15).

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1103899, B1106456, B1102259, B1107984, B1101039, B1103357, B1107633, B1104307, B1106656, B1103370. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz, with USB, RS-232C, EXT (V.SYNC) and probe ports P1 to P5. Supplied with measuring probes, Konica Minolta CA-210 CA-PU12/15.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer. Rear connections comprise a Probe Port P1, a USB Port, an RS-232C Port and an EXT (V.SYNC) Connection, plus an expansion panel with Ports P2 to P5. Rated voltage 100-240V~, power 50VA, frequency 50-60Hz. Supplied with (20) Measuring Probes (Konica Minolta CA-210 CA-PU12/15).

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1105658, B1105675, B1108919, B1107638, B1107652, B1104843, B1101314, B1101118, B1105911. Rated voltage 100-240V~, frequency 50-60Hz, power consumption 50VA, with USB, RS-232C and EXT (V.SYNC) interfaces and probe ports P1 to P5. Supplied with measuring probes with cable, Konica Minolta CA-210 CA-PU12/15.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B 1112279, B1110009, B1107505, B 1112614, B1107534, B1110010, B 1111584, B1109537. Rated voltage 100-240V~, power consumption 50VA, frequency 50-60Hz, with P1, USB, RS-232C and EXT (V.SYNC) interfaces. Supplied with measuring probes, Konica Minolta CA-210 CA-PU12/15.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1107529, B1106466, B1104908, B1107906, B1101309, B1106108, B1109415, B1107355. Rated voltage 100-240V~, rated power 50VA, frequency 50-60Hz, with rear connections P1, USB, RS-232C and EXT (V.SYNC). Supplied with Measuring Probes Konica Minolta CA-PU12/15.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1109009, B1106454, B1106429, B1108920, B1104915, B1101290, B1109199, B1106642. Probe ports P1 to P5, with USB, RS-232C and external V.SYNC connections. Rated voltage 100-240V~, power consumption 50VA, frequency 50-60Hz. Supplied with (8) measure probes, one marked Konica Minolta CA-210 CA-PU12/15.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1107756, B1107650, B1106432, B1106422, B1102338, B1107636, B1104834, B1106650. Rear panel with USB, RS-232C and external V.SYNC connections and probe ports P1 to P5. Rated voltage 100-240V~, frequency 50-60Hz, power consumption 50VA. Supplied with measuring probes with cable (Konica Minolta CA-210 CA-PU12/15).

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Konica Minolta CA-210 Display Color Analyzer, serial B1105182, B1103407, B1103385, B1107635, B1109168, B1107646, B1105761, B1109003. Rated voltage 100-240V~, frequency 50-60Hz, power consumption 50VA, with USB, RS-232C and EXT (V.SYNC) interfaces. Supplied with (8) Measuring Probe (Konica Minolta CA-PU12/15).

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


Display Color Analyzer, Minolta / Konica Minolta CA-210, serial B1102333, B1104827, B 1112479, B1104921, B 1112548, B 1112590, B 1112513, B1103361. Rated voltage 100-240V~, frequency 50-60Hz, power consumption 50VA, with P1, USB, RS-232C and EXT (V.SYNC) interfaces. Supplied with (8) Konica Minolta probes with cable.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


FANUC R-2000iB/125L Industrial Robot, year 2011, serial R11900/26. Robot controller type A05B-2535-B056, serial no. E11831978, dated 2011-08, with a 3 phase, 50/60 Hz power supply rated 12 KVA. Supplied with a Robot Controller (Fanuc System R-30iA) and a Teach Pendant.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


FANUC R-2000iC/210F Industrial Robot, year 2020, serial R20600B71. Robot type A05B-1333-B205, weight approx. 1090 kg; robot controller weight approx. 120 kg, input voltage (multi-tap input) 380-415/440-500 VAC, EN55011 Group 1 Class A. Supplied with a Robot Controller (Fanuc System R-30iB Plus), a Teach Pendant and a Connecting Cable.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


KUKA KR 120 R3100-2 / FLR Industrial Robot, year 2025, serial 1105606. Series QUANTEC-2, payload 120 kg, range 3100 mm, robot weight 1148 kg; control cabinet supply voltage 3~ 380...480 V, 50/60 Hz, full-load current 15 A. Supplied with a KUKA KR C5 dualcab AC control cabinet, a KUKA smartPAD, a cable set and a box of screws and small parts.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


KUKA KR 120 R3100-2 / FLR Industrial Robot, year 2025, serial 1105605. Series QUANTEC-2, payload 120 kg, range 3100 mm, robot weight approx. 1148 kg; control cabinet supply 3~ 380...480V, 50/60Hz, full load current 15A. Supplied with a KUKA KR C5 dualcab AC control cabinet, a KUKA teach pendant and a set of connecting cables.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


KUKA KR 16 R2010-2 / SEL Industrial Robot, year 2025, serial 810127635. Payload 16 kg, range approx. 2013 mm, weight approx. 261 kg, with a KUKA KR C4 controller on 3x400V, 50/60Hz, 22A full-load current. Supplied with a KUKA KR C4 robot controller and a KUKA teach pendant with cable.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


KUKA KR 10 R1440-2 6-Axis Industrial Robot, year 2025, serial 4327469. Payload 10 kg, reach 1440 mm, robot weight approx. 163 kg, with an energy supply chain mounted on the arm. Supplied with a KUKA KR C5 micro control cabinet, a KUKA teach pendant, a KUKA Akkupack battery pack and a set of connecting cables.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


KUKA KR 10 R1440-2 6-Axis Industrial Robot, year 2025, serial 4327470. CYBERTECH-2 Series, payload 10 kg, range approx. 1440 mm, weight approx. 163 kg, with a KUKA KR C5 micro controller. Supplied with a KUKA teach pendant, a KUKA Akkupack battery pack and a set of connecting cables.

Binding Dismantling/Handling and Loading Fee:
132 € (EURO)


KUKA KR 30-3 Industrial Robot, year 2017, serial 703959. Load 30 KG, range 2033 MM; control cabinet supply voltage 3x400V, 50/60Hz, full load current 22A, mains fuse 25A. Supplied with a KUKA KR C4 control cabinet, a KUKA teach pendant with cable, a connecting cable and an energy supply hose package.

Binding Dismantling/Handling and Loading Fee:
72 € (EURO)


KUKA KR 10 R1440-2 Industrial Robot, year 2025, serial 4327566. Payload 10 kg, range 1440 mm, weight 163 kg, series CYBERTECH-2; control unit supply voltage 200-240 V, 50/60 Hz, mains fuse 16 A. Supplied with a KUKA KSP-300-6-AC control unit, a KUKA teach pendant, a set of connecting cables and an energy supply hose package.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


KUKA KR 60-3 Industrial Robot, year 2018, serial 704697. Load 60 KG, range approx. 2033 MM, weight approx. 665 KG, variant KR60_3 C4 FLR ZH02, KR60_3\FLOOR; KR C4 control cabinet with 3x400V supply, 50/60Hz, 22A full-load current. Supplied with a KUKA teach pendant and a set of connecting cables in a plastic crate.

Binding Dismantling/Handling and Loading Fee:
96 € (EURO)


KUKA KR 60-3 Industrial Robot, year 2018, serial 704637. Load 60 KG, range approx. 2033 MM and weight approx. 665 KG, with control cabinet supply of 3x400V, 50/60Hz, full-load current 22A and mains fuse 25A. Supplied with a KUKA KR C4 control cabinet and a KUKA teach pendant.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


KUKA KR 3 R540 Industrial Robot, year 2017, serial 495504. Payload 3 KG, reach 541 MM, robot weight 27 KG. Supplied with a KUKA KR C4 compact robot controller (supply voltage 1x230V, 50/60Hz, mains fuse 16A), a KUKA teach pendant, a mains cable and a set of connecting cables.

Binding Dismantling/Handling and Loading Fee:
60 € (EURO)


KUKA KR 3 R540 Industrial Robot, year 2017, 2018, serial 495101, 495149, 495909, 495910, 495911. Robot data: load 3 KG, range approx. 541 MM, weight approx. 27 KG, variants KR3R540 C4SR and KR3R540\FLOOR. Controller: supply voltage 1x230 V, 50/60 Hz, full load current 12 A, mains fuse 16 A. Supplied with KUKA KR C4 compact robot controllers.