Description

Item Description:

Lot consists of:
(1) Thermoforming machine

Technical Details:

used to produce innerliner

Equipment Specifications Summary

Forming and Tool Dimensions

• Maximum frame inner size: 2005 × 905 mm

• Maximum tool base size: 2000 × 900 mm

• Minimum tool base size: 700 × 500 mm

• Maximum sheet size: 2090 × 960 mm

• Minimum sheet size: 790 × 560 mm

• Maximum tool height: 800 mm (550 + 250 mm)

• Maximum formed workpiece height: 550 mm

• Maximum sheet stack height: 1000 mm

• Maximum pallet height: 180 mm

Heating System

• Upper heating power: 83.3 kW

• Lower heating power: 71.3 kW

• Upper preheating power: 52 kW

• Lower preheating power: 46.8 kW

Drive Motors & Auxiliary Equipment

• Oil pump motor power: 19 kW

• Vacuum pump motor power: 23.4 kW

• Sheet centering motors power: 0.24 kW

• Sheet feed motor power: 2.2 kW

• Sheet feed width-adjustment motor power: 2.2 kW

• Sheet picker motor power: 0.37 kW

• Fan motor power: 5.5 kW

• Shear motor power: 2.2 kW

• Carriage motor power: 2.2 kW

• Rotary table motor power: 1.1 kW

• Scrap cutter motor power: 3.0 kW

• Scrap conveyor motor power: 0.37 kW

• Finished workpiece discharge belt motor power: 0.75 kW

• Cross-cutting motor power: 0.25 kW

• Cross-cut scrap conveyor motor power: 0.22 kW

• Transfer unit motor power: 1.5 kW

• Auxiliary units maximum consumption: 5.1 kW

• Tempering unit power: 52 kW

Electrical Requirements

• Maximum installed power: 375 kW

• Power consumption at 70% load: 262.5 kW

Vacuum System

• Vacuum pumps capacity: 750 m³/h (250 × 3)

• Tool vacuum tank capacity: 2,000 L

• Bell vacuum tank capacity: 2,000 L

Hydraulic System

• Required oil quantity: 600 L

• Hydraulic operating pressure: 10 MPa

• Maximum hydraulic operating pressure: 18 MPa

Pneumatic System

• Required air pressure: 600 kPa

• Compressed air consumption: 1,300 N litres/cycle

Cooling Water Requirements

• Incoming water pressure: 200-300 kPa

• Incoming water temperature: 12-20 °C

• Outgoing water temperature: 30-35 °C

Mechanical Characteristics

• Lower tool holder force: 9,000 kg

• Machine weight: 35,000 kg (35 tonnes)

Key Utility Requirements

• Electrical Supply: 375 kW installed load

• Compressed Air: 600 kPa, 1,300 N litres/cycle

• Cooling Water: 200-300 kPa at 12-20 °C

• Hydraulic Oil Capacity: 600 litres

Vacuum Capacity: 750 m³/h with two 2,000-litre vacuum tanks

Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. 

Thermoformer details: 

Forming area 2005mm x 905mm

Max forming depth 550mm

3x loading stations.

1 x heating station. (pre heating, final heating, upper and lower elements) - ceramic/quartz infrared elements

Pressure and vacuum forming operation. 

4 x side trimming presses. (rotation) Guillotine. 

Scrap collection end station.

Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. 

Yom 2007.



Further Information

Test

_{This website’s original content is provided in English. Translations into other languages are AI-generated and offered solely for user convenience; they may contain errors or inaccuracies. In case of any inconsistency, the English version prevails. No liability is assumed for misunderstandings or damages arising from translated content. Users should refer to the English version for authoritative information.}