Description

Item Description:

Lot consists of:
(1) Roll Feed Thermoforming Machine

Technical Details:

Used to produce door liner by thermoforming. YOM 2003

General

• Maximum roll diameter: 1200 mm

• Maximum roll width: 850 mm

• Minimum roll width: 570 mm

• Sheet loading height: 1750 mm

• Sheet feeding height: 1750 mm

• Discharge height of thermoformed product: 1750 mm

• Machine overall dimensions: See layout drawing

Roll Unwinding Station

• Sheet loading: Manual

• Roll change: Automatic (pneumatic)

• Sheet pulling: Motorized

Heating Station

• Format change: Motorized

• Format change stroke length: 500 mm

• Oven emptying in emergency: Automatic (pneumatic)

• Upper panel radiators: 134 × 300 W + 45 × 600 W

• Upper panel radiator power: 67,200 W

• Lower panel radiators: 112 × 600 W

• Lower panel radiator power: 67,200 W

Forming Station

Moving Level of the Mould Holder

• Maximum stroke of pneumatic cylinders: 750 mm

• Closing force of pneumatic cylinders: 687.5 daN × 4

Clamping Ring (Rim)

• Maximum stroke of pneumatic cylinders: 200 mm

• Closing force of pneumatic cylinders at 6 bar: 735 daN × 2

Pre-Stretching / Cooling Dome for Thermoformed Product

• Maximum stroke of pneumatic cylinders: 200 mm

• Closing force of pneumatic cylinders: 687.5 daN × 2

• Electric fan power: 0.55 kW × 4

Vacuum System

• Pump capacity: 240 m³/h × 2

• Pump motor power: 5.5 kW × 2

• Tank capacity: 1200 L × 2

Pneumatic System

• Operating pressure: 6 bar (±10%)

• Air intake connection:

Water System

• Operating pressure: 2.5 bar (±10%)

• Water intake (flow to chiller, closed-loop connection): DN ½"

• Temperature: 15°C (±10%)

Electrical System

• Three-phase electrical voltage + neutral + earth: 400 V (+10% / -6%)

• Frequency: 50 Hz

• Installed power: 280 kW

• Current: 465 A

Roll feed Thermoforming machine currently used in the manufacture of fridge door linings. 

Thermoformer comprises of :

Roll Unwinding Station.

Heating Station. - Upper and lower pre heater and heating

Forming Station. - table closing force of da Nx2: 735. 

Clamping Ring.

Pre-Stretching / Cooling Dome.

Vacuum System.

Pneumatic System.

Full workshop manuals.

Machine footprint of approximately 10m x 3 m x 5m



Further Information

Test

_{This website’s original content is provided in English. Translations into other languages are AI-generated and offered solely for user convenience; they may contain errors or inaccuracies. In case of any inconsistency, the English version prevails. No liability is assumed for misunderstandings or damages arising from translated content. Users should refer to the English version for authoritative information.}