Auctions & Liquidations
Private Treaty Sale | Electrolux White Goods Manufacturing Facility
Listing 6022012:Thermoforming machine ADOLF ILLIG UA 200/1g | 1999
used to produce Door liner , Adolf ILLIG UA 200/1g, serial 1573, YOM 1999
Machine Specifications
Forming Dimensions
-
Maximum forming area: 1,960 × 960 mm
-
Minimum mould dimensions: 860 × 720 mm
-
Maximum draw depth: 600 mm (positive/negative)
Material Handling
-
Maximum material width: 1,000 mm
-
Maximum material thickness (roll): 2.0 - 2.5 mm (used for 1.0-1.5mm thickness)
-
Maximum material thickness (sheet): up to 10 - 12 mm
-
Maximum roll diameter (QS unit): 1,200 mm
Power & Energy
-
Total heating capacity: 87.2 kW
-
Power supply: 3 × 380-400 V, 50 Hz
-
Total connected load: ~105 kW (configuration dependent)
Pneumatics & Vacuum
-
Operating pressure: 6 - 10 bar
-
Vacuum pump capacity: 100 - 160 m³/h (unit not explicitly shown, but typically specified as m³/h)
Control System
-
Primary PLC: Proprietary ILLIG control system
-
Indexing accuracy: ± 0.2 mm
Utility Requirements
-
Electrical supply: 3-phase, 380-400 V, 50 Hz
-
Connected electrical load: approximately 105 kW
-
Compressed air: 6-10 bar operating pressure
-
Vacuum system capacity: 100-160 m³/h
-
Primary PLC - Prorietary ILLIG
Indexing Accuracy +- 0.2mm
.
High-precision, servo-driven thermoforming machine designed primarily for sheet-fed plastic processing.
Tax Rate on Hammer Price: 27%
Tax Rate on Charges: 27%
Description
| Type | Thermoforming machine |
| Make | ADOLF ILLIG |
| Model | UA 200/1g |
| Year of Manufacture | 1999 |
| Serial Number | 1573 |
| Condition | Used |
| Quantity | 1 |
Item Description:
Lot consists of:
(1) Thermoforming machine
Technical Details:
used to produce Door liner , Adolf ILLIG UA 200/1g, serial 1573, YOM 1999
Machine Specifications
Forming Dimensions
-
Maximum forming area: 1,960 × 960 mm
-
Minimum mould dimensions: 860 × 720 mm
-
Maximum draw depth: 600 mm (positive/negative)
Material Handling
-
Maximum material width: 1,000 mm
-
Maximum material thickness (roll): 2.0 - 2.5 mm (used for 1.0-1.5mm thickness)
-
Maximum material thickness (sheet): up to 10 - 12 mm
-
Maximum roll diameter (QS unit): 1,200 mm
Power & Energy
-
Total heating capacity: 87.2 kW
-
Power supply: 3 × 380-400 V, 50 Hz
-
Total connected load: ~105 kW (configuration dependent)
Pneumatics & Vacuum
-
Operating pressure: 6 - 10 bar
-
Vacuum pump capacity: 100 - 160 m³/h (unit not explicitly shown, but typically specified as m³/h)
Control System
-
Primary PLC: Proprietary ILLIG control system
-
Indexing accuracy: ± 0.2 mm
Utility Requirements
-
Electrical supply: 3-phase, 380-400 V, 50 Hz
-
Connected electrical load: approximately 105 kW
-
Compressed air: 6-10 bar operating pressure
-
Vacuum system capacity: 100-160 m³/h
-
Primary PLC - Prorietary ILLIG
Indexing Accuracy +- 0.2mm
.
High-precision, servo-driven thermoforming machine designed primarily for sheet-fed plastic processing.
Further Information
| Asset Location | Electrolux Jasbereny, HU |
| Delivery Conditions | EXW (Incoterms 2020) Sale on an as-is, where-is basis, ex location |
| Payment Term | Immediately after Invoice Receipt If you receive a surcharge - more information on the Invoice |
| Seller | Maynards Europe GmbH Maynards is selling and issues the Invoice in order and in the name of the mentioned Seller |
Test
This website’s original content is provided in English. Translations into other languages are AI-generated and offered solely for user convenience; they may contain errors or inaccuracies. In case of any inconsistency, the English version prevails. No liability is assumed for misunderstandings or damages arising from translated content. Users should refer to the English version for authoritative information.
Auction Software by Bidlogix
