CNC Horizontal Machining Center DMG MORI NHX5000 | 2021

Binding Handling & Service Fee:
4785 € (EURO)


Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: Travel X / Y / Z: 730 / 730 / 880 mm Pallet size: 500 × 500 mm Pallet quantity: 2 (with threaded holes) Minimum B-axis indexing angle: 0.001° (DD direct drive) Max. rotary table speed: 100 rpm Pallet load: 500 kg Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) Automatic indexing setup station • Performance / Spindle Speed / Drive Power: Spindle: speedMASTER® motor spindle Speed range: 35 – 20,000 rpm Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) Torque: 221 / 107 / 86.8 Nm Tool taper: SK40 (7/24 taper, face contact) Tool magazine capacity: 60 tools (ring-type, random selection) Max. tool diameter: 70 mm (adjacent) / 170 mm (free) Max. tool length: 550 mm Max. tool weight: 12 kg Chip conveyor: rear discharge with drum filter Through-spindle coolant interface (8-step pressure control, up to 7 MPa) Coolant / air switching via spindle External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: Machine weight: approx. 12,000 kg Coolant tank capacity: 800 L Transformer: 54 kVA Power supply: 400 V, 50 Hz Equipment / Accessories: Renishaw OMP60 spindle probe system (optical transmission) Tool breakage detection system in the magazine Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) Automatic door for setup station Rotating inspection window (air-driven) Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) EtherNet/IP robot interface IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger CELOS with touchscreen and MAPPS functionality Four-color signal light tower Handheld control device (mobile handwheel) Central coolant preparation for through-spindle supply Drain circuit for auto-coupler (to prevent pressure drop) 10 programmable external M-codes 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) Voltage: 400 V, 50 Hz configuration Air filter unit (T105A-1000MSP)

CNC Horizontal Machining Center DMG MORI NHX5000 | 2021

Binding Handling & Service Fee:
4785 € (EURO)


Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: Travel X / Y / Z: 730 / 730 / 880 mm Pallet size: 500 × 500 mm Pallet quantity: 2 (with threaded holes) Minimum B-axis indexing angle: 0.001° (DD direct drive) Max. rotary table speed: 100 rpm Pallet load: 500 kg Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) Automatic indexing setup station • Performance / Spindle Speed / Drive Power: Spindle: speedMASTER® motor spindle Speed range: 35 – 20,000 rpm Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) Torque: 221 / 107 / 86.8 Nm Tool taper: SK40 (7/24 taper, face contact) Tool magazine capacity: 60 tools (ring-type, random selection) Max. tool diameter: 70 mm (adjacent) / 170 mm (free) Max. tool length: 550 mm Max. tool weight: 12 kg Chip conveyor: rear discharge with drum filter Through-spindle coolant interface (8-step pressure control, up to 7 MPa) Coolant / air switching via spindle External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: Machine weight: approx. 12,000 kg Coolant tank capacity: 800 L Transformer: 54 kVA Power supply: 400 V, 50 Hz Equipment / Accessories: Renishaw OMP60 spindle probe system (optical transmission) Tool breakage detection system in the magazine Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) Automatic door for setup station Rotating inspection window (air-driven) Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) EtherNet/IP robot interface IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger CELOS with touchscreen and MAPPS functionality Four-color signal light tower Handheld control device (mobile handwheel) Central coolant preparation for through-spindle supply Drain circuit for auto-coupler (to prevent pressure drop) 10 programmable external M-codes 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) Voltage: 400 V, 50 Hz configuration Air filter unit (T105A-1000MSP)

CNC Horizontal Machining Center DMG MORI NHX5000 | 2021

Binding Handling & Service Fee:
4785 € (EURO)


Machine Description for 2021 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Bielefeld Hilden GmbH Type / Model: NHX 5000, Fanuc 31iB with CELOS ERGOline Touch Year of Manufacture: 2021 Control System: FANUC 31iB with CELOS / 21.5" Multi-Touchscreen / MAPPS system Technical Data: • Working Area / Travels: Travel X / Y / Z: 730 / 730 / 880 mm Pallet size: 500 × 500 mm Pallet quantity: 2 (with threaded holes) Minimum B-axis indexing angle: 0.001° (DD direct drive) Max. rotary table speed: 100 rpm Pallet load: 500 kg Hydraulic coupling with 2 hydraulic and 2 air circuits (max. 7 MPa) Automatic indexing setup station • Performance / Spindle Speed / Drive Power: Spindle: speedMASTER® motor spindle Speed range: 35 – 20,000 rpm Power: 37 / 26 / 18.5 kW (15% / 30 min / continuous duty) Torque: 221 / 107 / 86.8 Nm Tool taper: SK40 (7/24 taper, face contact) Tool magazine capacity: 60 tools (ring-type, random selection) Max. tool diameter: 70 mm (adjacent) / 170 mm (free) Max. tool length: 550 mm Max. tool weight: 12 kg Chip conveyor: rear discharge with drum filter Through-spindle coolant interface (8-step pressure control, up to 7 MPa) Coolant / air switching via spindle External coolant system: INTERLIT TMF300/600 compact filter unit (70 bar / 32 L/min) • Weight / Dimensions / Electrical Connection: Machine weight: approx. 12,000 kg Coolant tank capacity: 800 L Transformer: 54 kVA Power supply: 400 V, 50 Hz Equipment / Accessories: Renishaw OMP60 spindle probe system (optical transmission) Tool breakage detection system in the magazine Hydraulic coupling on both pallets with integrated pressure regulation (7 MPa) Automatic door for setup station Rotating inspection window (air-driven) Oil mist extraction system: LTA AC3002 (1,050 m³/h, dual electrostatic stages) INTERLIT TMF300/600 high-pressure coolant filter system (70 bar, 32 L/min) EtherNet/IP robot interface IoTconnector, NETservice, Machine Data Connector (MDC), DMG MORI Messenger CELOS with touchscreen and MAPPS functionality Four-color signal light tower Handheld control device (mobile handwheel) Central coolant preparation for through-spindle supply Drain circuit for auto-coupler (to prevent pressure drop) 10 programmable external M-codes 2 hydraulic clamping towers (each with 6 hydraulic 2-jaw chucks, GHHY-2B-200.00/K) Voltage: 400 V, 50 Hz configuration Air filter unit (T105A-1000MSP)

CNC Horizontal Machining Center DMG MORI NHX5000 | 2017

Binding Handling & Service Fee:
4785 € (EURO)


Machine Description for 2017 Model: Horizontal Machining Center NHX 5000 Manufacturer: DMG MORI Co. Ltd. Type / Model: NHX 5000_M730UM, Series J-NHX5000-C_C01 Year of Manufacture: 2016 Control System: MAPPS M730UM with CELOS / 21.5" ERGOline Touch Technical Data: • Working Area / Travels: Travel X / Y / Z: 730 / 730 / 880 mm Pallet size: 500 × 500 mm Max. workpiece diameter: 800 mm Max. workpiece height: 1,000 mm Distance spindle center to pallet surface: 80 – 810 mm Distance pallet center to spindle reference plane: 70 – 950 mm Pallet load: 500 kg [optional 700 kg] Number of pallets: 2 Minimum table indexing angle: 1° [optional 0.001° rotary table] • Performance / Spindle Speed / Drive Power: Spindle type: speedMASTER® motor spindle Spindle speed range: 35 – 15,000 rpm Power: 30.7 / 26 / 18.5 kW (15% ED / 30 min / continuous) Torque: 207 / 95.5 Nm (10% / 100% duty) Tool taper: BT40 / #40 Tool magazine capacity: 40 tools [optional 60 / 120 / 180 / 240] Max. tool diameter: 70 mm (adjacent) / 170 mm (free) Max. tool length: 550 mm Max. tool weight: 12 kg Tool change time (chip-to-chip): 2.5 s Rapid traverse X/Y/Z: 60 m/min Feedrate range: 0 – 60,000 mm/min Acceleration: 1 G • Weight / Dimensions / Electrical Connection: Machine weight (incl. coolant tank): approx. 12,000 kg Floor space (W × L): 3,078 × 4,784 mm Total height: 2,852 mm Coolant tank capacity: 800 L Power supply: 37.3 kVA Compressed air: 0.5 MPa / 420 L/min Equipment / Accessories: NC rotary table with 0.001° indexing (DDM optional) Automatic 2-pallet changer (rotary APC) Two pallets with threaded bores and interface for hydraulic fixtures Chip conveyor (rear discharge) Direct measuring systems on X/Y/Z axes Renishaw OMP60 spindle probe system Tool breakage control system in the magazine High-pressure coolant interface (70 bar, Knoll) Coolant / air switching device for through-spindle supply Rotating inspection window Coolant gun Oil mist separator interface Ø200 mm (LTA AC3002 optional) Automatic loading station door Signal tower (red/yellow/green/blue) Portable manual pulse generator (handwheel) Air filter unit for clean compressed air supply 45 kVA transformer Knoll KF110/700 high-pressure coolant unit (7.0 MPa, 31 L/min) Three hydraulic clamping towers with double-jaw chucks CELOS system with apps (Production, Accessories, Support, Monitoring, Configuration) MAPPS M730UM control with 21.5" touchscreen and 15.6" sub-display SmartKey® operator access management

CNC 2-Pallet Vertical Machining Center Leadwell LCV-760 | 2009

Binding Handling & Service Fee:
3850 € (EURO)


Machine Designation: Vertical Machining Center LCV-760 (Column Moving Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Data • Working Area / Travels: X-axis travel: 760 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Distance from table (pallet) top to spindle end: 150 – 760 mm Distance from column front to spindle center: 718 mm Table size: 850 × 600 mm Permissible workpiece weight: 400 kg Table configuration: M16 × P2.0 mm T-slots Table height (floor to top): 1033 mm • Spindle / Drive: Spindle speed: 10 000 rpm (optional 12 000 rpm) Spindle motor: 18.5 / 24 kW (30 min / continuous) Max. spindle torque: 95 Nm (67.5 ft-lb) Spindle taper: 7/24 TAPER No. 40 (BT-40) Spindle bearing inner diameter: Ø 70 mm Tool clamping force: 1200 kgf Transmission: HT.D belt drive Spindle oil chiller: included Rigid tapping: standard • Feedrates: Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min Cutting feedrate: 10 m/min Jog feedrate: 2500 mm/min • Automatic Tool Changer (ATC): Type: arm-type changer Tool capacity: 30 tools Tool taper: BT-40 Retention knob: MAS P40T-1 (JIS B-6339) Max. tool diameter (adjacent): Ø 80 mm Max. tool diameter (free): Ø 100 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool-to-tool): 2 s Chip-to-chip: 6 s • Automatic Pallet Changer (APC): Number of pallets: 2 Change method: hydraulic “swapper” type Pallet change time: 12 s • Motors: Spindle motor: 18.5 kW (24 HP) X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque Hydraulic pump motor: 3 kW Lubrication pump motor: 0.01 kW Coolant pump motor: 0.76 kW • Guideways: X-axis: SNS45C2SSCOEx3 (600 mm width, 1000 mm distance) Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: Electrical power supply: 45 kVA Compressed air: 0.6 MPa (87 psi) @ 400 L/min Hydraulic oil tank: 400 L Lubrication tank: 2 L Coolant tank: 300 L • Dimensions / Weight: Machine height: 2885 mm Floor space: 3510 × 2410 mm Machine weight: 9200 – 9500 kg (≈ 10 t lifting requirement) • Cutting Capacity: Milling: 230 cm³/min Drilling: Ø 40 mm Tapping: M30

CNC 2-Pallet Vertical Machining Center Leadwell LCV-760 | 2009

Binding Handling & Service Fee:
3850 € (EURO)


Machine Designation: Vertical Machining Center LCV-760 (Column Moving Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Data • Working Area / Travels: X-axis travel: 760 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Distance from table (pallet) top to spindle end: 150 – 760 mm Distance from column front to spindle center: 718 mm Table size: 850 × 600 mm Permissible workpiece weight: 400 kg Table configuration: M16 × P2.0 mm T-slots Table height (floor to top): 1033 mm • Spindle / Drive: Spindle speed: 10 000 rpm (optional 12 000 rpm) Spindle motor: 18.5 / 24 kW (30 min / continuous) Max. spindle torque: 95 Nm (67.5 ft-lb) Spindle taper: 7/24 TAPER No. 40 (BT-40) Spindle bearing inner diameter: Ø 70 mm Tool clamping force: 1200 kgf Transmission: HT.D belt drive Spindle oil chiller: included Rigid tapping: standard • Feedrates: Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min Cutting feedrate: 10 m/min Jog feedrate: 2500 mm/min • Automatic Tool Changer (ATC): Type: arm-type changer Tool capacity: 30 tools Tool taper: BT-40 Retention knob: MAS P40T-1 (JIS B-6339) Max. tool diameter (adjacent): Ø 80 mm Max. tool diameter (free): Ø 100 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool-to-tool): 2 s Chip-to-chip: 6 s • Automatic Pallet Changer (APC): Number of pallets: 2 Change method: hydraulic “swapper” type Pallet change time: 12 s • Motors: Spindle motor: 18.5 kW (24 HP) X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque Hydraulic pump motor: 3 kW Lubrication pump motor: 0.01 kW Coolant pump motor: 0.76 kW • Guideways: X-axis: SNS45C2SSCOEx3 (600 mm width, 1000 mm distance) Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: Electrical power supply: 45 kVA Compressed air: 0.6 MPa (87 psi) @ 400 L/min Hydraulic oil tank: 400 L Lubrication tank: 2 L Coolant tank: 300 L • Dimensions / Weight: Machine height: 2885 mm Floor space: 3510 × 2410 mm Machine weight: 9200 – 9500 kg (≈ 10 t lifting requirement) • Cutting Capacity: Milling: 230 cm³/min Drilling: Ø 40 mm Tapping: M30

CNC 2-Pallet Vertical Machining Center Leadwell LCV-760 | 2012

Binding Handling & Service Fee:
3850 € (EURO)


Machine Designation: Vertical Machining Center LCV-760 (Column Moving Type) Manufacturer: LEADWELL CNC Machines Mfg. Corp., Taichung, Taiwan Type / Model: LCV-760 Control System: FANUC Oi-MD Technical Data • Working Area / Travels: X-axis travel: 760 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Distance from table (pallet) top to spindle end: 150 – 760 mm Distance from column front to spindle center: 718 mm Table size: 850 × 600 mm Permissible workpiece weight: 400 kg Table configuration: M16 × P2.0 mm T-slots Table height (floor to top): 1033 mm • Spindle / Drive: Spindle speed: 10 000 rpm (optional 12 000 rpm) Spindle motor: 18.5 / 24 kW (30 min / continuous) Max. spindle torque: 95 Nm (67.5 ft-lb) Spindle taper: 7/24 TAPER No. 40 (BT-40) Spindle bearing inner diameter: Ø 70 mm Tool clamping force: 1200 kgf Transmission: HT.D belt drive Spindle oil chiller: included Rigid tapping: standard • Feedrates: Rapid traverse (X / Y / Z): 32 / 32 / 32 m/min Cutting feedrate: 10 m/min Jog feedrate: 2500 mm/min • Automatic Tool Changer (ATC): Type: arm-type changer Tool capacity: 30 tools Tool taper: BT-40 Retention knob: MAS P40T-1 (JIS B-6339) Max. tool diameter (adjacent): Ø 80 mm Max. tool diameter (free): Ø 100 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool-to-tool): 2 s Chip-to-chip: 6 s • Automatic Pallet Changer (APC): Number of pallets: 2 Change method: hydraulic “swapper” type Pallet change time: 12 s • Motors: Spindle motor: 18.5 kW (24 HP) X-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Y-axis feed motor: 4.5 kW (6.4 HP), 30 Nm torque Z-axis feed motor: 3.88 kW (5.4 HP), 22 Nm torque Hydraulic pump motor: 3 kW Lubrication pump motor: 0.01 kW Coolant pump motor: 0.76 kW • Guideways: X-axis: SNS45C2SSCOEx3 (600 mm width, 1000 mm distance) Y-axis: SNS45LC2X151SLHx2 (600 mm width, 600 mm distance) Z-axis: SHS45R2SSCOEx1305×2 (500 mm distance) • Utilities / Connections: Electrical power supply: 45 kVA Compressed air: 0.6 MPa (87 psi) @ 400 L/min Hydraulic oil tank: 400 L Lubrication tank: 2 L Coolant tank: 300 L • Dimensions / Weight: Machine height: 2885 mm Floor space: 3510 × 2410 mm Machine weight: 9200 – 9500 kg (≈ 10 t lifting requirement) • Cutting Capacity: Milling: 230 cm³/min Drilling: Ø 40 mm Tapping: M30

Automatic Chips Wringer with Loading System Scoro Z3C T&A | 2021

Binding Handling & Service Fee:
1210 € (EURO)


Machine Designation: Chip Drying and Cleaning System with Centrifugal Dryer and Coolant Cleaning Unit Manufacturer: T & A Trenntechnik & Anlagenbau GmbH, Ettenheim, Germany Type / Model: SCORO Z3C chip wringer system with TORNADO 200 RT-S 2-phase coolant centrifuge Year of Manufacture: 2021 Control System: Siemens S7 PLC control according to EN 60204 Technical Data: • Application / Capacity: Material: short, free-flowing brass chips (various alloys) Throughput: up to 6 t / week (3-shift operation) Max. residual moisture: 3 % Coolant type: water-miscible Chip feeding: via lifting-tilting device Discharge: into Big-Bag (91 × 91 × 110 cm, max. 1000 kg) • Main Components: Lifting-tilting unit EHKG 250: • Load capacity 250 kg • Tilting angle 150° • Tilting height 2200 mm • Manual bin feeding • Lifting speed 7 m/min Protective fence: • Electrically interlocked door • Height 2500 mm • Built to UVV safety standards Scraper-belt chip conveyor KF 300/380/2: • Total length ≈ 4000 mm • Discharge height 1800 mm • Conveyor width 380 mm, height 300 mm • Pitch angle 60° • Chain type DIN 8165, pitch 63 mm, breaking load 60 000 N • Gear motor drive with safety clutch and standstill monitoring • Wear-resistant manganese steel bottom lining and full covering Feed hopper: • Volume 1 m³ • Ultrasonic level sensor for automatic stop when empty Chip wringer / centrifuge SCORO Z3C: • Fully automatic de-oiling centrifuge for short free-flowing chips • Inlet 350 × 350 mm • Chip discharge Ø 400 mm • Motor 2.2 kW, IP54, 400 V / 50 Hz, with brake 24 V and thermal protection • Drum Ø 300 mm, speed 1900 rpm, slot width 0.2 mm, stainless steel screen • Throughput ≈ 400 kg brass chips (depending on shape and material) Base frame for centrifuge: steel welded construction adapted to Big-Bag height Coolant tank (3-chamber type): 600 × 600 × 350 mm with rinse pump, discharge pump and level control Drip tray: covers entire system footprint Electrical control cabinet: • Siemens S7 PLC • 400 V / 50 Hz supply • 24 V DC control • Operator elements mounted in door • Prepared for future integration of chip crusher V200 Paint finish: system RAL (specified by customer), control cabinet RAL 7035 Documentation: Operating manual, parts list, drawings, circuit diagrams, CE declaration, test book (in German and Hungarian) Installation & Commissioning: Includes transport, assembly, start-up and training of operating staff Chip collection trolleys: 16 pcs (600 × 600 × 600 mm, ≈ 180 L each) 2-phase coolant centrifuge TORNADO 200 RT-S: • Stationary design for cleaning recovered coolant and drying solids • Drive motor 2.2 kW, 400 V / 50 Hz with electric and mechanical brake • Drum speed 3900 rpm • Sludge capacity 15 kg • Drum insert NBR • Noise level < 70 dB(A) • Safety interlocks IFM & Euchner • Pump A40-110B/A (0.55 kW, ≈ 60 L/min) with suction hose DN 25 • Independent electrical control cabinet (400 V / 50 Hz, 24 V DC)

Tool Setter Zoller Hyperion 500 H500UF3-00089 | 2015

Binding Handling & Service Fee:
198 € (EURO)

Tool Setter Zoller Smile 400 / SMU442M2-00149 | 2014

Binding Handling & Service Fee:
198 € (EURO)

CNC Turning Center Leadwell ECO 250 HS | 1990

Binding Handling & Service Fee:
1540 € (EURO)

CNC Belt Grinding and Polishing System STAHL SM-CNC 8/7 - S350 | 1989

Binding Handling & Service Fee:
605 € (EURO)


The digital stand control-unit visible on the pictures and video is not included (visible because exchangeable between machines). The machine works with its own controller.

CNC Belt Grinding and Polishing System STAHL CNC 8/5 P 1000 | 1989

Binding Handling & Service Fee:
605 € (EURO)

CNC Belt Grinding and Polishing System STAHL CNC 8/7 S 350 | 1991

Binding Handling & Service Fee:
605 € (EURO)


The digital stand control-unit visible on the pictures and video is not included (visible because exchangeable between machines). The machine works with its own controller.

CNC Belt Grinding and Polishing System STAHL CNC 8/7 S 350 | 1991

Binding Handling & Service Fee:
605 € (EURO)


The digital stand control-unit visible on the pictures and video is not included (visible because exchangeable between machines). The machine works with its own controller.

CNC Belt Grinding and Polishing System STAHL CNC 8/7 S 350

Binding Handling & Service Fee:
605 € (EURO)


The digital stand control-unit visible on the pictures and video is not included (visible because exchangeable between machines). The machine works with its own controller.

CNC Belt Grinding and Polishing System STAHL CNC 8/5 P 1000 | 1989

Binding Handling & Service Fee:
605 € (EURO)

Hot forging press 150t with brass furnace MECOL PRESS SOV150 | 1982

Binding Handling & Service Fee:
3850 € (EURO)


Excenter; 15 kW; Capacity 150 t.; strokes per minute 120; push stroke 175 mm

Hot forging press 360t with brass furnace MECOL PRESS SEO 36 | 1996

Binding Handling & Service Fee:
6380 € (EURO)


Excenter; 22 kW; Capacity 360 t; control Siemens; tool dimensions 240x240mm; strokes per minute 1/min 55

Hydraulic trimming press HYDRAP PRESSEN HPDB 40 | 1982

Binding Handling & Service Fee:
1210 € (EURO)


Overtravel distance 9 mm; overtravel time 85 ms

Hydraulic gap frame press WANZKE HPC 30R | 1983

Binding Handling & Service Fee:
990 € (EURO)


Pressing force 300 kN; rapid traverse force 80 kN, lag time 0.15

Robot casting with controller ABB IRB 2400 | 1994

Binding Handling & Service Fee:
198 € (EURO)

Sandcore shooter with sliding table VOGEL & SCHEMMANN KSM 6.05 HB/E | 1984

Binding Handling & Service Fee:
495 € (EURO)


Hotbox process; 40 kW, tool dimension 500x150x60mm; control Siemens

Automatic hydraulic sandcore shooter with belt conveyor VOGEL & SCHEMMANN BA-05.00-HB/E/SPS | 1990

Binding Handling & Service Fee:
495 € (EURO)


Hotbox process; 34 kW, tool dimension 500x250x60mm; control Siemens

Automatic hydraulic sandcore shooter with belt conveyor VOGEL & SCHEMMANN BA-05.00-HB/E/SPS | 1990

Binding Handling & Service Fee:
495 € (EURO)


Hotbox process; 34 kW, tool dimension 500x250x60mm; control Siemens

Automatic hydraulic sandcore shooter with belt conveyor VOGEL & SCHEMMANN BA-05.00-HB/E/SPS | 1993

Binding Handling & Service Fee:
495 € (EURO)


Hotbox process; 34 kW, tool dimension 500x250x60mm; control Siemens

Automatic sprue gate disc saw machine IAG 112.00 | 1993

Binding Handling & Service Fee:
352 € (EURO)

Induction furnace 600 kg with controller IMR B2R 85 | 1988

Binding Handling & Service Fee:
352 € (EURO)

Induction furnace 600 kg with controller IMR | 1990

Binding Handling & Service Fee:
352 € (EURO)

Induction furnace 600 kg with controller IMR | 1990

Binding Handling & Service Fee:
352 € (EURO)