Description

Description

The machine is used for washing and drying flat glasses on both sides, in the industrial sector, in one pass.

The glasses are driven horizontally in a longitudinal direction one behind the other. A maximum of 2 glasses of the same thickness should be placed next to each other in order to ensure safe transport.

The right side of the machine - in the transport direction - is defined as the operating side, i.e. the washing water storage tank is pulled out to the right, the switch cabinet is on the right side at the outlet of the machine.

The machine is constructed as follows in the direction of flow:

• Entry

• High pressure pre-wash zone

• Brush roller washing zone I - II

• Final cleaning spray zone

• Drip zone

• Dry zone

• Outlet

__________

Technical specifications

Operating media

• Compressed air on site, 6 bar

• Fully desalinated water on site, at least 3 bar

• City water provided by the customer, at least 2 - 3 bar

• Average water consumption / Lechler - approx. 6.5 l / min average at 3 bar;

• Maximum water consumption / Lechler nozzle approx. 35 l / min. max. at 3 bar;

• Water loss approx. 60 l / h

• Total water consumption approx. 450 l / h;

• Inlet to the machine ¾ "connection

• Connection of return pump 1 ¼ "

Design of the system

• Disc dimensions 1590 mm wide x 1190 mm long

• Slice thicknesses 2 - 4 mm

• Disc transport lying between transport and pressure rollers

• Transport roller design 50mm, EPDM cover 5 mm, ground

• Transport roller bearing, stainless steel bearing with plastic housing

• Distance between transport rollers in / out and rinsing / drying area approx. 250 mm

• Distance between the transport rollers between the brushes approx. 280 mm

• Distance between the transport rollers in front of and behind the brushes approx. 120 mm

• Transport speed (frequency controlled) approx. 0.5 - 6 m / min.

• Transport roller drive with pulse control via counter wheel and capacitive switch 0.75 kW via worms, worm gears, worm shafts and countershafts

• Pressure roller design 50mm, EPDM cover 5 mm, ground

• Pressure roller bearing mounted in sliding blocks so that it can move in height

• Installation of pressure rollers above the transport rollers in areas with restoring forces

• Pressure roller drive via spur gear drive through the transport rollers with double-toothed spur gears

Electrical information

• Operating voltage 400 V / 50 Hz

• Control voltage 220 V or 24 V DC

• Control software Siemens S7 315-2DP with MP 377, 10 "display with Ethernet interface and Profibus card Siemens CP342-5 for PLC built into the control cabinet door.

Overall dimensions of the washing and drying system

• Installation height of the panes approx. 900 ± 25 mm

• Length of the inlet approx. 2150 mm

• Length of the washing and drying zone approx. 2525 mm

• Length of the spout approx. 2085 mm

• Total length of the machine approx. 6760 mm

• Width of the machine (without protrusions) approx. 2416 mm

• Total width of the machine (installation dimension) approx. 6300 mm with fan housing and control cabinet

• Total height of the machine over the floor approx. 4508 mm

__________________________________________

Descriptions, data, dimensions and quantities are based on the subjective beliefs of the auctioneer and are created to the best of our knowledge and belief. They do not represent guaranteed properties according to .434 BGB or quality guarantees in the sense of Art. 443 BGB. Images are only used to document the condition of the system and in no way justify the scope of the sale!