Banbury 2 Mixing Line Kobelco DEFU-BB270 Mixer (NP/P) | 1973-2022

Binding Dismantling/Handling and Loading Fee:
132500 € (EURO)


Banbury Kneader / Mixer #2 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1973 Installation of 2 × 38" ASM Batch-Off units – Banbury II 1979 Beth filter for Kneader II 1981 Exhaust system for solvent tank Kneader 2 1985 Temperature control unit Kneader 2 1994 Automatic laydown system for Mixer #2 2008 Vibration measurement system Mixer II 2008 Demag Manipulator Mixer I (2x) 2009 Measuring device – Power Quality Interface for Kneader 2009 Ergonomic upgrade Rubber splitter 2010 CMS system for Mixer II 2010 Upgrade TCU for Mixer II 2014 BB 270-6W Mixer Head Transfer Unit (HTU) for Kneader II 2015 Monitoring system (Kneaders I–III) for CMS Kneader II 2015 Replacement of obsolete computer and UPS for Mixer 2 2015 Installation Autorelease Terminals Mixer II 2017 Hopper for Mixer #2 2018 Mixer 2 MS Version 4 2018 Slab feeder Mixer 2 2021 Replacement Mixer Body / Serial no. 16439 2022 Mill gearbox Kneader 2 Control system: CMS system, TCU upgrade, Computer & UPS replaced Maintenance / condition: Regular modernizations and upgrades documented (1973–2022) Accessories / options: Batch-Off units, Slab feeder, Hopper, Drop Door Box, Roller Head with Conveyor, Mill, Dip Tank, Cooling Line, Lay Down

Banbury 3 Mixing Line Kobelco DEFU-BB270 Mixer (NP/P) [hybrid / productive and non productive] | 1962-2023

Binding Dismantling/Handling and Loading Fee:
132500 € (EURO)


Banbury Kneader / Mixer #3 with peripheral equipment Documented modifications / upgrades: Year Modification / Upgrade 1962 Gearbox upgrade Kneader III 1973 Carbon black weighing & charging system for Kneader III 1981 Exhaust system for Kneader III 1985 Batch-Off machine Kneader 3 1985 Temperature control unit Kneader 3 1995 DC motor 1500 HP, 1700 V, 1678 A 1996 Upgrade to KSBI-L270 Kneader III 2007 Hose scale for Kneader #3 2008 Vibration measurement system Mixer III 2008 Column slewing crane for bale handling Mixer III 2009 Vacuum hoist system Kneader III 2010 CMS system for Mixer III 2013 Long-strip cutting device for Kneader III 2014 Slab feeder for Kneader III 2014 Overnose conveyor Kneader III 2014 2 × floor scales for Kneader III 2014 New controls for Kneader III 2014 Cooling register MUAFAN 1+2 – cooling line mill Kneader 2+3 2015 Monitoring system (Kneaders I–III) for CMS Kneader III 2017 Mixer body Kneader III (replacement) 2023 Rubber kneader III KSBI-L270 Control system: New controls 2014, CMS system 2010, DC Drive / Automax, PLC Batch-Off & Conveyor, AC Drives documented Maintenance / condition: Regular modernizations and upgrades documented 1962–2023 Accessories / options: Batch-Off machine, Slab feeder, Put Up conveyor, Long-strip cutter, Floor scales, Bale handling crane, Vacuum hoist system, Carbon black silos & weighing system, Extruder, Roller Die, Roller Head with conveyor, Cooling systems (Dip Tank, Cooling Line, Laydown), Control systems (DC Drive, AC Drive, Automax, PLC)

Triplex Extrusion Line Nakata | ca. 1996/97 (overhauled 2012/13)

Binding Dismantling/Handling and Loading Fee:
68900 € (EURO)


Documented notes: Line has been frequently modernized since commissioning Line setup according to diagram: • Head • Cylinder • Gearbox • Motors • Steel frame • Triplex extruder configuration • Control system with Beckhoff interface • Operator screens displaying extrusion parameters • Winder units labeled “Wickler” • Emergency stop button present • Industrial electrical control cabinets installed

Quadruplex Extruder Troester | 2012

Binding Dismantling/Handling and Loading Fee:
55700 € (EURO)


Documented modifications / upgrades: Year Modification / Upgrade 2012 Installation Quadruplex Extrusion Line #02 for single treads 2012 Foundation for Quadruplex Extruder #02 2012 Induction heating insert + die on Quad. #02 2013 Expansion of extrusion tools for tread/SW production 2014 2 Siemens compact asynchronous motors 2017 Extruder screw 150 base Quad 2 2019 Extended closed loop upgrade 2021 Extended closed loop upgrade 2022 New 200 mm screw for Troester extruders Control system: Modern control and visualization units (control desks, operator panels) Technical data: • Extruder screws up to 200 mm (2022) • Base screw 150 mm (2017) • Siemens asynchronous motors (2014) Maintenance / condition: Regularly modernized and upgraded 2012–2022 Accessories / options: Conveyor systems, heating and cooling units, monitoring and measuring stations, winding equipment

Bead Apexing Line (1) SMM d.o.o. Bead Apexing Line 1 // Apex 14"-24" | 2005

Binding Dismantling/Handling and Loading Fee:
12200 € (EURO)

Liquid Polymer Weighing and Dosing System MEYER PLANTTEC / PLANER Systemtechnik Verwiegung Ricon 603 | 2020

Binding Dismantling/Handling and Loading Fee:
700 € (EURO)


Manufacturer: • MEYER PLANTTEC • PLANER Systemtechnik Model / Designation: Verwiegung Ricon 603 Control Cabinet Type: 2005767 = P1 Power Supply: 400 VAC / 50 Hz Control Voltage: 24 VDC Maximum Fuse Rating: 25 A Rated Current: 8 A Total Weight: 60 kg Serial Number: 2005767-1 Year of Manufacture: 2020 PST Drawing Number: 161-10-760-02 2. System Overview (Visible Components) 2.1 Structural Frame • Welded steel frame with grated working platform • Integrated drum support area • Mounted linear guiding rails and table elements • Lower grid section for drainage or spill collection 2.2 Pump and Mixing Section Mounted on the left side: • Vertical motor-driven pump assembly, equipped with INVEOR motor controller • Pump intake connected to a chemical drum positioned on the system frame • Stainless-steel piping connected to the valve block and dosing line 2.3 Valve and Actuator Unit • Stainless steel valve block with flanged connections • Pneumatic rotary actuator: AIR TORQUE Germany Type / Model: SC0050-AJZ Series: FGF-010-S-17 Pressure range: Max. 10 bar Torque values: 29 Nm (min) / 60 Nm (max) Temperature range: –40 °C to +180 °C Connections: 1/4" Certification: CE, ATEX (EX II 2 G Ex h IIC T6 Gb X / Ex h IIIC T85°C Db X) Year Code: 20138769

Bead Apexing Line (2) SMM d.o.o. Bead Apexing Line 2 // Apex 14"-24" | 2005

Binding Dismantling/Handling and Loading Fee:
12200 € (EURO)

Bead Apexing Line (3) SMM d.o.o. Bead Apexing Line 3 // Apex 14"-24" | 2011

Binding Dismantling/Handling and Loading Fee:
14400 € (EURO)

Hexagonal Bead Winding Line (1) Gadsden, Davis, ABB | 2001-2008

Binding Dismantling/Handling and Loading Fee:
7200 € (EURO)


1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety guarding • Multiple rotating winding discs and wire guides • Integrated operator control panels with pushbuttons, indicator lights, and emergency stop • Mechanical winding stations mounted on heavy steel frames • Wire feed paths and guiding elements visible 2. Bead Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Ancillary equipment including heating/control units and material handling components • Safety guarding integrated into the line 3. Carousel and Loader Robot • ABB Industrial articulated robot arm (orange) • Rotary carousel stations with multiple indexed holders • Safety fencing enclosing robot work areas • Integrated control panels adjacent to robot cell 4. Coil Winding Equipment • Multiple wire payoff and take-up reels arranged in series • Tensioning and guiding rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Square Bead Winding Line (2) Gadsden, Davis, ABB | 1995-2006

Binding Dismantling/Handling and Loading Fee:
7200 € (EURO)


1. Bead Winder – Gadsden • Enclosed winding machines with yellow safety guarding • Multiple rotating winding discs and wire guides • Integrated operator control panels with pushbuttons, indicator lights, and emergency stop • Mechanical winding stations mounted on heavy steel frames • Wire feed paths and guiding elements visible 2. Bead Extruder – Davis • Extruder assemblies with screw and barrel sections • Downstream guiding and forming components • Control cabinets and local operator panels • Ancillary equipment including heating/control units and material handling components • Safety guarding integrated into the line 3. Carousel and Loader Robot • ABB Industrial articulated robot arm (orange) • Rotary carousel stations with multiple indexed holders • Safety fencing enclosing robot work areas • Integrated control panels adjacent to robot cell 4. Coil Winding Equipment • Multiple wire payoff and take-up reels arranged in series • Tensioning and guiding rollers • Winding stations mounted on steel frames • Clearly separated parallel winding positions

Oil-filled Power Transformer MGM Transformer Company | 2008

Binding Dismantling/Handling and Loading Fee:
on Request € (EURO)


General Information • Equipment type: Oil-filled power transformer • Installation type: Stationary, floor-mounted • Application context (visual): Industrial power supply for production machinery Manufacturer • Manufacturer (nameplate): MGM Transformer Company • Manufacturer location (nameplate): City of Commerce, CA 90040, USA • Country of manufacture: United States (explicitly stated: “Made in USA”) Identification • Manufacturer serial number (SN): 08-09-08-50232A • Additional identification marking: 7008608D0002 • Catalog number (CAT NO): M2885A2625U0333 • P/L No.: P2885TU-0333 Electrical Characteristics (Nameplate) • Rated power: 2885 kVA • Phase: 3 PH • Frequency: 50 Hz • High voltage (HV): 20,000 V • Low voltage (LV): 2300 / 2300 / 2300 V • Impedance: 6.36 % at 2885 kVA • Insulation class: OA • Temperature rise: 65 °C Insulation / Dielectric Data • HV BIL: 125 kV • LV BIL: 60 kV • Cooling medium: Oil • Liquid level reference: – 14 in. below handhole at 25 °C – Liquid level change: 0.64 in. per 10 °C Mechanical / Tank Data • Tank vacuum suitability: −10 PSI (vacuum filling) • Maximum operating pressure: +7 PSI • Altitude rating: Up to 3300 ft above sea level Weight Data (Nameplate, approximate) • Core and coil weight: 11,820 lb • Tank and fittings: 8,320 lb • Oil quantity: 1,235 gal • Total weight: 27,500 lb • Untanking weight: 11,820 lb Tap Changer Information (Nameplate) • Tap positions: 1 (A) to 5 (E) • HV tap voltages: – 21,000 V – 20,500 V – 20,000 V – 19,500 V – 19,000 V

4-Roller Wire Calender Line Comerio | 1973-2024

Binding Dismantling/Handling and Loading Fee:
62300 € (EURO)


• 4-roller configuration • Asset description text: “4-WALZEN-Z-KALANDER” • Multiple documented upgrades and overhauls listed (hydraulic overhaul, electronic systems update, control upgrade, pre-warming system, bubble piercing unit, etc.) with cap. dates shown

Automatic Horizontal Tire Grinding Machine Matteuzzi RRM45-1 | 2007

Binding Dismantling/Handling and Loading Fee:
4600 € (EURO)


Weight: 6,100 kg | Power Supply: 400 V / 50 Hz / 41 A | Control Unit: Allen-Bradley PanelView Plus 1000 | Workholding: Horizontal rotating chuck | Conveyor System: Integrated roller conveyor (in-feed/out-feed)

Automatic Horizontal Tire Grinding Machine Matteuzzi RRM45/1 | 2009

Binding Dismantling/Handling and Loading Fee:
4600 € (EURO)


Weight: 6,100 kg Power Supply: 400 V / 50 Hz / 39 A Control Unit: Allen-Bradley PanelView Plus 1000 Touchscreen Workholding: Horizontal rotating chuck/clamping system Material Handling: Integrated roller conveyor with vertical centering rollers

X-Ray Tire Inspection Machine Collmann Inspektomat | 2007

Binding Dismantling/Handling and Loading Fee:
3500 € (EURO)


1. Electrical and Power Data • Rated power: 22 kW • Power supply: 400 V / 50 Hz • Rated current: 35 A 2. Pneumatic System • Operating pressure range: 4 – 10 bar 3. Control and Operating System • Control unit (HMI): Allen-Bradley PanelView 550 • X-ray controller: Gulmay MP1 Data Log Controller 4. X-Ray Generation System • High-voltage generator: Gulmay FC160-1/2 • Execution: Mobile unit • Country of manufacture: England 5. Housing and Safety Equipment • Fully enclosed, radiation-shielded cabin • Cabin colour: white / blue • Integrated safety interlock system 6. Material Handling System • Integrated motorized roller conveyor • Conveyor configured for both in-feed and out-feed of material 7. Electrical Installation • External electrical cabinet system • Multi-door cabinet bank • Cabinet manufacturer: Rittal

High Table Cutter BIAS 66 | 1971-1992

Binding Dismantling/Handling and Loading Fee:
1400 € (EURO)


1. Machine Classification • Machine type: Rubber ply / tread servicer and winding line • Component designation: “R-Wickler 1” (R-Winder 1) 2. Functional Description • Conveying of rubber sheet material • Controlled let-off of rubber compounds and auxiliary liner or interleaf materials • Winding of processed rubber components into rolls suitable for downstream tire production processes 3. Mechanical Structure • Heavy-duty steel frame construction • Surface finish: industrial green paint 4. Conveyor and Material Handling Systems • Wide flat-belt conveyor system for rubber sheet transport • Overhead mounting points for liner and interleaf material rolls 5. Safety Equipment • Yellow perimeter safety fencing surrounding the operating area • Emergency stop push-buttons accessible to the operator 6. Control and Operating Interface • Local operator control panel • Integrated display screen • Physical push-button controls • Integrated communication handset Some Pictures show the Machine in the Situation when it was still used, those are only for Presentation Purposes

Gum Strip Application Ply Cutter Karl Eugen Fischer GmbH HTBC | 2005-2015

Binding Dismantling/Handling and Loading Fee:
10100 € (EURO)


1. Manufacturer • Manufacturer: Karl Eugen Fischer GmbH 2. Machine Identification • Machine type: Gum strip application ply cutter • Model: HTBC • Year of construction: 2005–2015 (series production range) 3. Intended Use • Cutting and application of gum strips and/or ply material • Designed for use in tire manufacturing and rubber processing operations 4. Mechanical Construction • Heavy-duty steel frame construction • Industrial green painted finish • Elevated operator platform with integrated access stairs 5. Conveying and Material Handling • Wide flat-belt conveyor system for continuous rubber sheet transport • Conveyor integrated into the cutting and application process 6. Winding and Let-Off System • Overhead and lower roller stations • Designed for liner and ply material handling • Configured for controlled let-off and wind-up operations 7. Electrical Equipment • Electrical supply: 400 V / 50 Hz • Electrical cabinets: – Large standalone grey cabinet bank – Integrated climate control system 8. Safety Equipment • Yellow perimeter safety fencing • Mechanical guarding of hazardous areas

4-Roller Gum-Calender Comerio 18x54 | 1971-2018

Binding Dismantling/Handling and Loading Fee:
10400 € (EURO)


4-Roller Gum Calender 1. Manufacturer • Manufacturer: Comerio Ercole 2. Machine Identification • Machine type: 4-roller gum calender • Roll dimensions: 18" × 54" – Roll diameter: 18 inches – Roll length: 54 inches 3. Year of Construction and Modernization • Original year of construction: 1971 • Modernization history: Machine regularly modernized up to 2018 4. Intended Use • Calendering of rubber compounds (gum) • Designed for continuous processing within tire and rubber manufacturing lines 5. Control and Automation • Upgraded control system implemented in 2012 • MMI system installed in 2001 • Control panel equipped with Beckhoff components 6. Mechanical and Process Upgrades Mechanical upgrades • Installation of new calender rolls (2018) • Spool winder optimization (2014) • Cooling line overhaul (2013) Process-related upgrades • Gauge measurement system installed (2012) • Material width measuring system SQ1 installed (2009) • Cassette wind-up systems with dedicated control cabinets installed (2009) 7. Drive System • Large industrial electric motor manufactured by ABB • Drive system coupled with Comerio Ercole gearbox 8. Line Configuration • Integrated feed extruder adaptation (installed 2012) • Cooling line included in the system • Multiple winding stations integrated into the calender line

Tire Durability Testing Machine Inmess RRT | 2005

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


1. Manufacturer • Manufacturer: inmess Gesellschaft für Industrie- und Messtechnik mbH 2. Machine Identification • Model: RRT (Rolling Resistance Tester) • Machine number: 05-U-RRT-08 • Year of construction: 2005 3. Physical Data • Machine weight: 6,200 kg • Execution: Heavy industrial construction • Finish: Yellow / green 4. Test and Performance Parameters • Test wheel diameter: 67 inches (approx. 1.70 m) • Maximum test speed (V_max): 320 km/h • Maximum test load: 2,500 kg • Camber angle adjustment range: 0° – 5° 5. Drive System • Heavy-duty electric drive motor • Multi-belt transmission system 6. Control and Instrumentation • Control unit (HMI): Allen-Bradley PanelView 550 • Instrumentation: – Digital display units JUMO di 308 – Used for pressure and load monitoring 7. Electrical Equipment • Standalone electrical cabinet • Integrated active cooling unit

Tire Durability Testing Machine Hasbach | 1962

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


1. Manufacturer • Manufacturer: Hasbach 2. Machine Identification • Machine identification: Hasbach 3 • Machine type: Tire endurance / rolling resistance test rig 3. Intended Use • Endurance and rolling resistance testing of tires • Designed for industrial and laboratory tire testing applications 4. Mechanical and Performance Data • Test wheel diameter: 67 inches (approx. 1.70 meters) • Maximum speed (V/MAX): 200 km/h • Maximum test load: 4,500 kg • Camber angle: 0° (fixed) 5. Drive System • Large industrial electric motor • Multi-belt transmission system • Integrated flywheel for rotational inertia 6. Control System • Control unit (HMI): Allen-Bradley PanelView 550 7. Mechanical Construction and Installation • Heavy-duty steel frame construction • Frame colour: green • Yellow safety mesh guarding installed around hazardous areas • Installation type: pit-mounted configuration 8. Electrical Equipment • Standalone electrical cabinet bank • Cabinet colour: beige • Integrated cabinet cooling units

Tire Durability Testing Machine Hasbach | 1962

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


Tire Endurance / Rolling Resistance Test Rig 1. Manufacturer • Manufacturer: Hasbach 2. Machine Identification • Machine identification: Hasbach 4 • Machine type: Tire endurance / rolling resistance test rig 3. Intended Use • Endurance and rolling resistance testing of tires • Designed for industrial and laboratory tire testing applications 4. Mechanical and Performance Data • Test wheel diameter: 67 inches (approx. 1.70 meters) • Maximum speed (V/MAX): 200 km/h • Maximum test load: 4,500 kg • Camber angle: 0° (fixed) 5. Drive System • Large industrial electric motor (blue) • Belt-driven transmission system • Integrated flywheel for rotational inertia 6. Control and Instrumentation • Control unit (HMI): Allen-Bradley PanelView 550 • Instrumentation: – Digital controllers JUMO di 308 7. Safety and Installation • Yellow wire mesh safety cages providing perimeter guarding • Installation type: pit-mounted configuration

Tire Durability Testing Machine Schenk GPCL 316.388 | 1957 (1985)

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


High-Speed Tire Test Rig (Reifenprüfstand) 1. Manufacturer • Manufacturer: Carl Schenck Maschinenfabrik GmbH • Location: Darmstadt, Germany 2. Machine Identification • Machine identification: Schenck 6 • Machine type: High-speed tire test rig (Reifenprüfstand) 3. Year of Construction and Modernization Status • Original year of construction (mechanical chassis): 1957 • Condition: Vintage mechanical structure with subsequently retrofitted modern control technology 4. Intended Use • High-speed endurance and performance testing of tires • Designed for controlled laboratory and industrial testing under elevated rotational speeds 5. Mechanical and Performance Data • Test wheel diameter: 2.0 meters • Maximum speed (V/MAX): 340 km/h (upgrade specification) • Maximum test load: 1,200 kg • Camber angle adjustment range: 0° to 5° 6. Mechanical Construction • Heavy-duty cast steel frame construction • Frame finish: green • Large flywheels and rotating drums integrated into the mechanical structure 7. Drive System • Large industrial electric motor • Power transmission via belt drive 8. Control and Automation • Control unit (HMI): Allen-Bradley PanelView 550 • Modernized control architecture integrated with the original mechanical platform 9. Safety Equipment • Fully enclosed metal safety housing • Circular inspection windows integrated into the enclosure 10. Electrical Equipment • Standalone electrical cabinet • Cabinet finish: grey • Integrated active cooling system • Electrical equipment modernized relative to original mechanical design

Tire Durability Testing Machine WYKO (7) | 1975

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


1. Manufacturer • Manufacturer: Wyko 2. Machine Identification • Machine identification: Wyko 7 • Internal equipment number: PRS07 • Machine type: High-speed tire test rig 3. Intended Use • High-speed and endurance testing of tires • Designed for controlled industrial tire testing operations 4. Mechanical and Performance Data • Test wheel diameter: 67 inches (approx. 1.70 meters) • Maximum speed (V/MAX): 300 km/h • Maximum test load: 2,500 kg • Camber angle adjustment range: 0° to 5° 5. Drive System • Large top-mounted industrial electric motor • Belt-driven power transmission 6. Control System • Control unit (HMI): Allen-Bradley PanelView 550 7. Loading and Handling Equipment • Integrated overhead Demag chain hoist • Tire grabber / manipulator for tire handling and positioning 8. Safety Equipment • Full perimeter yellow wire mesh safety cage • Safety interlocks integrated into enclosure 9. Electrical Equipment • Standalone electrical cabinet • Integrated active cooling unit

Tire Durability Testing Machine Tianjin Jiurong Wheel Tech TJR-2-PC/LT (JC) | 2011

Binding Dismantling/Handling and Loading Fee:
1900 € (EURO)


PC/LT Tire Durability Test Machine 1. Manufacturer • Manufacturer: Tianjin Jiurong Wheel Tech Co., Ltd. • Country of manufacture: People’s Republic of China 2. Machine Identification • Model: TJR-2-PC/LT (JC) • Machine type: PC/LT tire durability test machine • Internal identification: “Tianjin 8” • Serial number: B1060 • Year of construction: August 2011 3. Intended Use • Durability and endurance testing of passenger car (PC) and light truck (LT) tires • Designed for high-speed and load-controlled tire testing applications 4. Test Drum and Capacity • Test drum diameter: 2,000 mm • Test drum width: 500 mm • Tire diameter range: 500 – 1,000 mm • Rim diameter range: 12" – 24" 5. Mechanical and Performance Data • Maximum speed (V/MAX): 350 km/h • Maximum test load: 25 kN (approx. 2,500 kg) • Camber angle adjustment range: –6° to +6° 6. Drive System • Large AC electric drive motor • Power transmission via multi-belt drive system 7. Electrical and Power Data • Rated power: 120 kW • Electrical connection: 400 V / 50 Hz • Rated current: 220 A 8. Control and Automation • Control unit (HMI): Allen-Bradley PanelView 550 9. Electrical Equipment • Standalone electrical cabinet • Cabinet manufacturer: Rittal • Integrated active cooling unit 10. Physical Data • Machine weight: 15,000 kg • Overall dimensions (L × W × H): – 7,064 × 2,795 × 2,050 mm

Bulk Storage Silo System – Silica Ellimetal N.V. | 2008

Fire Truck TSF VW/IVECO Magirus TSF | 2000

Binding Dismantling/Handling and Loading Fee:
30 € (EURO)


LATE DELIVERY: Only available for Pick-up in late March 2026 Current mileage: approx. 17.500 Kilometers (17.12.2025) Fire Fighting Vehicle TSF (Tragkraftspritzenfahrzeug) 1. Vehicle Classification • Vehicle type: Fire fighting vehicle TSF (Tragkraftspritzenfahrzeug) • Applicable standard: DIN 14530 T 16 2. Manufacturer and Chassis • Body manufacturer: IVECO Brandschutztechnik Görlitz GmbH (Magirus) • Chassis manufacturer: Volkswagen • Chassis type: LT 35 3. Identification and Production Data • Year of construction: 2000 • Factory number: 0887 • Internal call sign: 80/59/1 4. Previous Use • Formerly operated by the plant fire department (“Werkfeuerwehr Goodyear Fulda”) 5. Powertrain • Transmission: Manual gearbox 6. Equipment Configuration (As Installed) 6.1 Equipment Compartment G1 (Driver Side) • Holmatro hydraulic rescue equipment, comprising: – Hydraulic power unit – Hydraulic spreader – Hydraulic cutter • Traffic cones • Medical backpack 6.2 Equipment Compartment G2 (Passenger Side) • Chainsaw (Stihl) • Breathing apparatus holders (Dräger) • Toolboxes • Chemical spill absorbent material 6.3 Equipment Compartment GR (Rear) • Slide-out tray for portable fire pump (TS) • Hose reel • Spine board • Stretcher

Commando Car Audi A4 | 2016

Binding Dismantling/Handling and Loading Fee:
30 € (EURO)


LATE DELIVERY: Only available for Pick-up in late March 2026 Audi A4 Avant 2.0 TDI (“Werkfeuerwehr”) 1. Manufacturer and Model • Manufacturer: Audi AG • Model: Audi A4 Avant 2.0 TDI • Body type: Station wagon (“Kombilimousine”) 2. Identification Data • Vehicle Identification Number (VIN): WAUZZZ8KXAA052994 • License plate: FD-WF 112 • First registration: 26 October 2009 3. Mileage • Mileage: 174,522 km • Mileage reading date: 15 December 2025 4. Powertrain • Engine type: Diesel • Displacement: 1,968 ccm • Engine output: 105 kW (143 HP) • Transmission: Manual gearbox 5. Previous Use • Formerly operated as a command and service vehicle of the plant fire department (“Werkfeuerwehr Goodyear Fulda”) 6. Exterior and Interior • Exterior color: Red (“Rot”) • Interior: Grey cloth upholstery • Radio handset installed in the rear • Dashboard-mounted holder present 7. Wheels and Tires • Tire size: 225/50 R17 94Y 8. Equipment (As Stated) • Roof rails • Cargo barrier net • Rubber floor mats • Factory-installed detachable tow bar (AHK), as mentioned in vehicle documents

Hydraulic Pallet Turner Kaup Aschaffenburg | 2017

Binding Dismantling/Handling and Loading Fee:
1600 € (EURO)


1. Manufacturer • Manufacturer: Kaup GmbH & Co. KG 2. Machine Identification • Model: 1.6T451W/099 (Clamp Unit) • Machine type: Stationary hydraulic bale clamp / opening station • Year of construction: 2011 • Serial number: 671426 3. Load and Hydraulic Data • Rated capacity: 1,500 kg at 600 mm load center • Maximum hydraulic pressure: 150 bar 4. Mechanical Construction • Blue hydraulic clamp unit • Mounted on a stationary lifting frame 5. Control System • Local control panel • Siemens hour meter installed • Physical push-buttons for operation 6. Safety Equipment • Full perimeter safety fencing • Fence color scheme: black / yellow • Light curtain protection integrated

CNC Milling Machine Enshu ACCU-Mill AM-1547 | 1983

Binding Dismantling/Handling and Loading Fee:
900 € (EURO)


LATE DELIVERY: Only available for Pick-up in late March 2026 CNC Milling Machine – Enshu Accu-Mill 1. Manufacturer • Manufacturer: Enshu Limited, Japan • Distribution / Affiliation: Yuasa Machinery Corp. 2. Machine Identification • Model: Accu-Mill • Machine type: Vertical CNC bed milling machine 3. Control System • CNC control unit: Fanuc System 6M 4. Spindle System • Vertical spindle head • Variable speed drive 5. Working Table • T-slot working table • Machine vise installed on the table 6. Lubrication System • Manual lubrication system • Automatic way lubrication system • Specified lubricant: Mobil Vactra Oil No. 2 LATE DELIVERY: Only available for Pick-up in late March 2026

NC Milling Machine Knuth UMWF 4 | 2013

Binding Dismantling/Handling and Loading Fee:
800 € (EURO)


LATE DELIVERY: Only available for Pick-up in late March 2026 Universal Milling Machine 1. Manufacturer • Manufacturer: KNUTH Werkzeugmaschinen GmbH 2. Machine Identification • Model: UWF 4 • Machine type: Universal milling machine (Universal-Fräsmaschine) • Year of construction: 2013 • Serial number: 156811 3. Electrical Data • Rated power: 7.5 kW • Electrical connection: 400 V / 50 Hz / 3-phase 4. Control and Measurement • Digital readout (DRO): Knuth X.pos 3.1 • Axis coverage: 3-axis 5. Spindle and Head Configuration • Universal swivel head (Huron system) • Additional horizontal spindle 6. Feed System • Automatic servo feed on X-, Y-, and Z-axes 7. Working Table • Large clamping table • Equipped with T-slots 8. Accessories • Machine vise • Coolant system • Integrated work light