Korábbi aukciók
Online Auction | Stryker - Machine tools sale in Switzerland
Started: 04 June 2023 at 22:00 UTC
Ended: 26 July 2023 at 07:00 UTC
At the centre of the swiss watch valley, offering high end machining center and swiss lathe from a renowned medical equipment manufacturer following the decision to complete close this 80.000m² production site. Sale in conjunction with PRODEQ
Megosztás:
LOT 2120016
Sandblasting Machine, Year: 2005
Binding Dismantling & Loading Fee:
375 CHF (Swiss Franc)
Technical data
working room: length: 896 mm
working room: width: 796 mm
working room: height: 800 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 0.75 kW
mains voltage: 380 V
mains frequency: 15 HzAz eladás véget ért
LOT 2120077CNC Swiss Type Lathe TRAUB TNL 16/26, Year: 2000
Binding Dismantling & Loading Fee:
2750 CHF (Swiss Franc)
Used To Cut Titanium Raw Bar. Working hours 54000 (circa)
CONTROLS
CNC controls TRAUB TX 8I
BASIC FUNCTIONS
number of spindles: 2
number of turrets: 2
number of c-axes: 2
WORKING RANGE TURNING
turning diameter (max): 26 mm
bar diameter (max): 26 mm
worpiece length max.: 250 mm
MAIN SPINDLE
spindle revolutions (max): 8000 /min
COUNTER SPINDLE
spindle revolutions (max): 8000 /min
ELECTRICAL SPECIFICATIONS
total power consumption: 33 kW
DIMENSIONS / WEIGHTS
space requirements -left/right-: 3706 mm
space requirements -front/back-: 1292 mm
total height: 1630 mm
MAIN SPINDLE
- max. bar diameter: 26 mm
- max. speed: 8.000 rpm
- C-axis indexing: 0.1 degree
- stroke Z1: 250 mm
- stroke Z1 with rotating guide bush: 225 mm
- max. feed rate: 30 m/min
COUNTER SPINDLE
- max. bar diameter: 26 mm
- max. speed: 8.000 rpm
- C-axis indexing: 0.1 degree
- travel Z4: 250 mm
- travel X3: 370 mm
- max. feed Z4: 30 m/min
- max. feed X3: 60 m/min
TOOL REVOLVER 1 (bottom)
- Travel X1: 35 mm
- travel Y1: +/- 20 mm
- Rapid traverse X1/Y1: 15 m/min
- Tool positions: 12
- of which driven tools: 12
- max. speed: 6.000 rpm
TOOL REVOLVER 2 (top)
- Traverse path X2: 50 mm
- travel Z2: 100 mm
- Travel Y2: +/- 20 mm
- Rapid traverse X1/Y1: 15 m/min
- Tool positions: 12
- of which driven tools: 12
- max. speed: 6.000 rpm
FRONTAPPARAT
- tool positions: 5
- max. speed: 6.000 rpm
- Clamping diameter: 40 mm
- Distance between sleeves: 54 mm
- Travel X3: 370 mm
- Traverse path Z3: 250 mm
- Rapid traverse X3: 60 m/min
- Rapid traverse Z3: 30 m/min
RECAPPARAT
- Tool positions: 5
- max. speed: 6.000 rpm
- Clamping diameter: 40 mm
- Distance between sleeves: 54 mm
- Travel X4: 73 mm
- Traverse path Y4: +/- 50 mm
- Rapid traverse X4/Y4: 15 m/min
incl. IMECA bar feederAz eladás véget ért
LOT 2120037CNC Swiss Type Lathe TRAUB TNL 26, Year: 2006
Binding Dismantling & Loading Fee:
2750 CHF (Swiss Franc)
CONTROLS
CNC controls TRAUB TX 8I
BASIC FUNCTIONS
number of spindles: 2
number of turrets: 2
number of c-axes: 2
WORKING RANGE TURNING
bar diameter (max): 26 mm
worpiece length max.: 225 mm
MAIN SPINDLE
spindle revolutions (max): 8000 /min
COUNTER SPINDLE
spindle revolutions (max): 8000 /min
Z-axis travel: 250 mm
X/Z SLIDE
tool fixture: Turret
number of tool positions (total): 12
number of live positions: 12
- rotation speeds (min): 0 /min
- rotation speeds (max): 6000 /min
MAIN SPINDLE
- max. bar diameter: 26 mm
- max. speed: 8.000 rpm
- C-axis indexing: 0.1 degree
- stroke Z1: 250 mm
- stroke Z1 with rotating guide bush: 225 mm
- max. feed rate: 30 m/min
COUNTER SPINDLE
- max. bar diameter: 26 mm
- max. speed: 8.000 rpm
- C-axis indexing: 0.1 degree
- travel Z4: 250 mm
- travel X3: 370 mm
- max. feed Z4: 30 m/min
- max. feed X3: 60 m/min
TOOL REVOLVER 1 (bottom)
- Travel X1: 35 mm
- travel Y1: +/- 20 mm
- Rapid traverse X1/Y1: 15 m/min
- Tool positions: 12
- of which driven tools: 12
- max. speed: 6.000 rpm
TOOL REVOLVER 2 (top)
- Traverse path X2: 50 mm
- travel Z2: 100 mm
- Travel Y2: +/- 20 mm
- Rapid traverse X1/Y1: 15 m/min
- Tool positions: 12
- of which driven tools: 12
- max. speed: 6.000 rpm
FRONTAPPARAT
- tool positions: 5
- max. speed: 6.000 rpm
- Clamping diameter: 40 mm
- Distance between sleeves: 54 mm
- Travel X3: 370 mm
- Traverse path Z3: 250 mm
- Rapid traverse X3: 60 m/min
- Rapid traverse Z3: 30 m/min
RECAPPARAT
- Tool positions: 5
- max. speed: 6.000 rpm
- Clamping diameter: 40 mm
- Distance between sleeves: 54 mm
- Travel X4: 73 mm
- Traverse path Y4: +/- 50 mm
- Rapid traverse X4/Y4: 15 m/min
incl. LNS Hydrobar Express 332 bar feederAz eladás véget ért
LOT 2120078Ultrasonic Degreasing GLOGAR MU 45L, Year: 2009
Binding Dismantling & Loading Fee:
150 CHF (Swiss Franc)
ELECTRICAL SPECIFICATIONS
total power consumption: 1.9 kW
mains voltage: 230 V
max volume: 45 litersAz eladás véget ért
LOT 2120098Xmas Cell – Anodization, Year: 2012
Binding Dismantling & Loading Fee:
1650 CHF (Swiss Franc)
IMPORTANT NOTE following component are disfunct on this item : Staubli robot, control cabinet, electric and hydraulics systems.Az eladás véget ért
LOT 2120099Xmas Cell – Anodization, Year: 2012
Binding Dismantling & Loading Fee:
1650 CHF (Swiss Franc)Az eladás véget ért
LOT 2120092Storage automat ALPROBOTIC TS200, Year: 2012
Binding Dismantling & Loading Fee:
3500 CHF (Swiss Franc)Az eladás véget ért
LOT 2120142Plasma Polishing Machine STS INDUSTRIE , Year: 2021
Binding Dismantling & Loading Fee:
on demandAz eladás véget ért
LOT 2120091Xmas Cell, Year: 2012
Binding Dismantling & Loading Fee:
25 CHF (Swiss Franc)
IMPORTANT NOTE following component are disfunct on this item : PC, automation, electrics.Az eladás véget ért
LOT 2120006CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2005
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120095Sandblasting Machine ALPROBOTIC MB100, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
+ Stäubli robot arm
The cell was used for sandblasting medical parts.Az eladás véget ért
LOT 2120048CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2007
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
number of c-axes: 2
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120102Laser Marking and assembly ALPROBOTIC MLA100, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
+ 1x Stäubli robot arm / The cell was used for laser marking of medical parts.Az eladás véget ért
LOT 2120143Pure Water Circulation System ENVIROFALK RKA 1200, Year: 2021*
Binding Dismantling & Loading Fee:
on demand
max 1200L/h, < 0,1 μS/cm, softening equipment MC-N 100, reverse osmosis 500l/hAz eladás véget ért
LOT 2120014Sandblasting Machine, Year: 2005
Binding Dismantling & Loading Fee:
375 CHF (Swiss Franc)
Technical data
working room: length: 896 mm
working room: width: 796 mm
working room: height: 800 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 1.12 kW
mains voltage: 380 V
mains frequency: 50 HzAz eladás véget ért
LOT 2120097Sandblasting Machine ALPROBOTIC MB200, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)Az eladás véget ért
LOT 2120096Sandblasting Machine ALPROBOTIC MB100, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
+ Stäubli robot arm The cell was used for sandblasting medical parts.Az eladás véget ért
LOT 2120101Laser Marking ALPROBOTIC ML100, Year: 2012
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
LOT 2120101
+ 1x Stäubli robot arm
The cell was used for laser marking of medical parts.
The complete system is currently not functional and needs to be repaired.Az eladás véget ért
LOT 2120085CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2010
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
number of c-axes: 2
Machine with 10 axis and 6 spindles!
Movable headstock (Z1)
- Speed S1: 10.000 rpm
- C-axis spindle: yes
- Indexing spindle: 0.1 degrees
- spindle passage: 20 mm
- max. workpiece length: 220 mm
Slide 1 (X1-Y1)
- tool holder: 2x5 pcs.
- Speed S6: 8.000 rpm
Slide 2 (X2-Y2)
- Tool holder: 2x5 pcs.
- Speed S2: 6.000 rpm
- 4 driven tools
Front attachment (X3-Z3)
- Tool holder: 4 pcs.
- Speed S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Speed S4: 10.000 rpm
- C-axis spindle: yes
- Indexing spindle: 0.1 degrees
- spindle passage: 20 mm
- max. workpiece length 220 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- Bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120007CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2005
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120066Sandblasting Machine, Year: 2005
Binding Dismantling & Loading Fee:
450 CHF (Swiss Franc)
Technical data
working room: length: 896 mm
working room: width: 796 mm
working room: height: 800 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 1.12 kW
mains voltage: 400 V
mains frequency: 50 HzAz eladás véget ért
LOT 2120124Sandblasting Machine IEPCO I 15/20
Binding Dismantling & Loading Fee:
75 CHF (Swiss Franc)
Technical data
working room: length: 375 mm
working room: width: 600 mm
working room: height: 760 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 1.5 kW
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
space requirements -left/right-: 850 mm
space requirements -front/back-: 1020 mm
total height: 2000 mm
total weight approx.: 420 kg
- Peenmatic 850 GSD-2
- Machine already dismantledAz eladás véget ért
LOT 2120034CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2006
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120107Label Printer ZEBRA ZM600
Binding Dismantling & Loading Fee:
50 CHF (Swiss Franc)Az eladás véget ért
LOT 2120126Degreasing Machine AMSONIC A-4000, Year: 2015
Binding Dismantling & Loading Fee:
1450 CHF (Swiss Franc)
DIMENSIONS / WEIGHTS
space requirements -left/right-: 1500 mm
space requirements -front/back-: 1500 mm
total height: 2400 mm
Solvent parts cleaning system with ZESTRON VD
(Class A3 hydrocarbons)
Basket dimensions
- approx. 300x200x150 mm
- approx. 420x220x170 mm
max. weight per batch: 25 kg
Hourly output: 3-6 batches/hourAz eladás véget ért
LOT 2120088Stacker MÉKAPHARM Apoteka, Year: 2010
Binding Dismantling & Loading Fee:
450 CHF (Swiss Franc)Az eladás véget ért
LOT 2120015Sandblasting Machine, Year: 2005
Binding Dismantling & Loading Fee:
375 CHF (Swiss Franc)
Technical data
working room: length: 896 mm
working room: width: 796 mm
working room: height: 800 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 0.75 kW
mains voltage: 380 V
mains frequency: 50 HzAz eladás véget ért
LOT 2120052Press, Year: 2007*
Binding Dismantling & Loading Fee:
150 CHF (Swiss Franc)Az eladás véget ért
LOT 2120144Bar feeder LNS HYDROBAR SPRINT 555, Year: 2006
Binding Dismantling & Loading Fee:
on demand
Bar diameter 5-55mm, with Loading system Side chain lift. Bar length 3200mmAz eladás véget ért
LOT 2120004Laser Marking TRUMPF VWS 800 RS, Year: 2005
Binding Dismantling & Loading Fee:
650 CHF (Swiss Franc)
CONTROLS
PC controller
DIMENSIONS / WEIGHTS
laser capacity: 2000 WAz eladás véget ért
LOT 2120084CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2010
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
number of c-axes: 2
Machine with 10 axis and 10 spindles!
Movable headstock (Z1)
- Speed S1: 10.000 rpm
- C-axis spindle: yes
- Indexing spindle: 0.1 degrees
- spindle passage: 20 mm
- max. workpiece length: 220 mm
Slide 1 (X1-Y1)
- tool holder: 2x5 pcs.
- Speed S6: 8.000 rpm
Slide 2 (X2-Y2)
- Tool holder: 2x5 pcs.
- Speed S2: 6.000 rpm
- 4 driven tools
Front attachment (X3-Z3)
- Tool holder: 4 pcs.
- Speed S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Speed S4: 10.000 rpm
- C-axis spindle: yes
- Indexing spindle: 0.1 degrees
- spindle passage: 20 mm
- max. workpiece length 220 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- Bar diameter: 5-32 mm
- mx. bar length: 4200 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120081Sandblasting Machine SANDMASTER FG2, Year: 2010*
Binding Dismantling & Loading Fee:
450 CHF (Swiss Franc)
ELECTRICAL SPECIFICATIONS
total power consumption: 0.2 kW
mains voltage: 230 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
space requirements -left/right-: 570 mm
space requirements -front/back-: 350 mm
total height: 430 mm
Tool size up to approx. 80x80x50 mm
Industry: Medical Technology, Restoration, PalaeontologyAz eladás véget ért
LOT 2120100Inspection Machine ALPROBOTIC CAD200, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
+ 2x Stäubli robot arm / The cell was used to inspect medical parts.Az eladás véget ért
LOT 2120147Industrial shelving units w/o contents
Binding Dismantling & Loading Fee:
on demand
1x shelving with 4 long shelves with a payload of 3500 kg each + 5 short shelves with a payload of 4500 kg each (according to the picture)
1x shelving with 6 long shelves with a payload of 3500 kg each + 4 short shelves with a payload of 4500 kg each (according to the picture)Az eladás véget ért
LOT 2120005CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2005
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120035CNC Swiss Type Lathe TORNOS Deco-20a/26a, Year: 2006
Binding Dismantling & Loading Fee:
2400 CHF (Swiss Franc)
CONTROLS
CNC controls FANUC 16 ITB
BASIC FUNCTIONS
number of spindles: 6
Machine with 10 axes and 6 spindles!
Movable headstock (Z1)
- Spindle S1: 10.000 rpm
- C-axis spindle: yes
- spindle passage: 20 mm
- max. workpiece length: 200 mm
Slide 1 (X1-Y1)
- spindle S6
Slide 2 (X2-Y2)
- spindle S2
Front attachment (X3-Z3)
- Spindle S3: 6.000 rpm
Counter spindle (X4-Z4-Y4)
- Spindle S4: 10.000 rpm
- spindle passage: 20 mm
- max. workpiece length 200 mm
- tool holders counter-operation: 7x
- speed counter-operation S5: 8.000 rpm
incl. bar feeder TORNOS SBF 532
- bar diameter: 5-32 mm
- Loading capacity: approx. 8x32 mm to 55x5 mmAz eladás véget ért
LOT 2120094Sandblasting Machine ALPROBOTIC MB100, Year: 2013
Binding Dismantling & Loading Fee:
1150 CHF (Swiss Franc)
+ 1x Stäubli robot arm
The cell was used for sandblasting medical parts.Az eladás véget ért
LOT 2120146Industrial shelving units w/o contents
Binding Dismantling & Loading Fee:
on demand
1x shelving unit with 6 long shelves, each with a load capacity of 3500 kg (see picture)
1x shelving unit with 4 long shelves, each with a load capacity of 3500 kg + 4 short shelves, each with a load capacity of 4500 kg (see picture)Az eladás véget ért
LOT 2120038CNC Swiss Type Lathe TRAUB TNC 42/65, Year: 2006
Binding Dismantling & Loading Fee:
2750 CHF (Swiss Franc)
CONTROLS
CNC controls TRAUB TX 8I
BASIC FUNCTIONS
number of spindles: 2
number of turrets: 2
number of c-axes: 2
number of y-axes: 1
WORKING RANGE TURNING
turning diameter (max): 65 mm
bar diameter (max): 65 mm
worpiece length max.: 450 mm
MAIN SPINDLE
spindle revolutions (max): 4000 /min
spindle bore diameter: 65 mm
COUNTER SPINDLE
spindle revolutions (max): 4000 /min
c-axis: yes
Z-axis travel: 520 mm
ELECTRICAL SPECIFICATIONS
total power consumption: 49 kW
mains power supply: 39 kVA
mains voltage: 400 V
mains frequency: 50 Hz
DIMENSIONS / WEIGHTS
space requirements -left/right-: 4354 mm
space requirements -front/back-: 2076 mm
total height: 1917 mm
total weight approx.: 5200 kg
ATTACHMENTS (TURNING)
bar feeder: yes
bar magazine: no
- bar length (max): 4200 mm
- bar diameter (max): 65 mm
chip conveyor: yes
coolant unit: yes
European CE standards: yes
MAIN SPINDLE
- max. turning diameter: 65mm
- max. turning length: 450 mm
- speed: 4000 rpm
- power: 18.5 kW
- torque: 230 Nm
- C-axis: yes
X AXIS (slide S1 + S2)
- travel: 140 mm
- feed rate: 15 m/min
Z AXIS (slide S1 + S2)
- travel: 450 mm
- feed rate: 30 m/min
Z ACHSE (slide S1)
- travel: +/- 35 mm
- feed rate: 6 m/min
TOOL TURRET TOP(W1)
- number of positions: 10
- of which driven positions: 10
- Y-axis: yes
TOOL TURRET BOTTOM(W2)
- number of positions: 10
- of which driven positions: 10
- Y-axis: no
COUNTER SPINDLE
- max. turning diameter: 65mm
- speed: 4000 rpm
- power: 11 kW
- torque: 210 Nm
- C-axis: yes
- traverse path: 520 mm
- feed rate: 30 m/min
incl. LNS HYDROBAR SPRINT 555 bar feederAz eladás véget ért
LOT 2120065Sandblasting Machine, Year: 2008*
Binding Dismantling & Loading Fee:
450 CHF (Swiss Franc)Az eladás véget ért
