Vente par traité privé | HAL Plauen | Fermeture d'une usine de composants automobiles en aluminium
LISTE 2770001
Centre d'usinage vertical CNC à 5 axes Wenzler VKM 1-1 | 2016
Centre d'usinage 5 axes Cette machine a été utilisée comme machine d'exposition de 2016 à 2022. À partir de 2022, la machine a été utilisée pour la production chez HAL Plauen pour l'usinage de supports d'essieux. Avant d'être utilisée pour la production, la machine a été entièrement révisée/modernisée. En décembre 2024, une nouvelle broche de fraisage a été achetée (la broche a environ 500 heures de fonctionnement). Heures de fonctionnement de la machine : 24 000 Zone de travail : -> Axe X 1500 mm -> Axe Y 1250 mm -> Axe Z 880 mm Avance / Déplacement rapide : -> Axe X 100 m/min -> Axes Y et Z 100 m/min Accélération des axes : -> Axes X et Y 7 m/s² -> Axe Z 10 m/s² -> Accélération 150 m/s³ Capacité de charge de la table : -> Poids max. 400 kg Broche : -> Porte-outil HSK 100 -> Plage de vitesse 10 000 tr/min -> Puissance (S6/40 % de charge) 40 kW -> Couple max. couple max. 175 Nm Magasin d'outils : -> Positions 36 -> Longueur d'outil max. 520 mm -> Diamètre d'outil max. (avec emplacement adjacent libre) 205 mm -> Poids d'outil max. 20 kg -> Charge totale 200 kg -> Temps de changement d'outil 3 s avec convoyeur à copeaux et refroidisseur / unité de refroidissement • Fabricant : Lahntechnik GmbH • Modèle : KESY 280-01 • Numéro de série : 2017-05981 • Année de fabrication : 2017 • Puissance nominale : 13,6 kW • Tension nominale : 400 V / 3~ / PE / 50 Hz • Tension de commande : 24 V CC • Indice de protection : IP 54 • Réfrigérant : R410A – équivalent 10,03 t CO₂ • Pression de service max. : 30 bar (HD) / 19 bar (ND) • Poids à vide : 400 kg • Pays d'origine : Allemagne La machine/l'équipement ne comprend aucun outil/fixation ou préhenseur (robot) lié au produit.Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770002Centre d'usinage CNC bi-broche horizontal 5 axes SW BAW08-22 | 2020
Commande CNC SIEMENS 840D SL Raccordement électrique Tension de raccordement : 3 × 400 V / 50 Hz (avec mise à la terre) Type de réseau : réseau TN-S ou TN-C Charge totale raccordée : 152 kVA Facteur de puissance : 0,6 Protection par fusible : 250 A gG (5 s) Poids Poids de la machine en fonctionnement : 28 000 kg Poids de transport : 24 500 kg Magasin d'outils Changement d'outils : Système de prélèvement Gestion des outils : Positions d'outils à codage fixe Capacité : 84 outils (2 × 42) Poids total max. des outils : 400 kg Entraînements d'avance Type d'entraînement : Moteurs synchrones triphasés Système de mesure de ligne X/Y/Z : Direct, absolu Axes X1 et X2 Rcs A Hexgpa Rjqn Snsh Avance rapide : 120 m/min Accélération max. : 10 m/s² Facteur Kv : 6 Force de pointe : 2 × 6 000 N Force continue : 2 × 3 000 N Précision de positionnement : Tp = 0,008 mm Axe Y Avance rapide : 120 m/min Accélération max. : 11 m/s² Facteur Kv : 6 Force de crête : 20 000 N Force continue : 10 000 N Précision de positionnement : Tp = 0,008 mm Axes Z1 et Z2 Avance rapide : 120 m/min Accélération max. : 20 m/s² Facteur Kv : 6 Force maximale : 2 × 6 000 N Force continue : 2 × 3 000 N Précision de positionnement : Tp = 0,008 mm Broches principales Disposition des broches : horizontale, deux broches côte à côte Diamètre des broches : 40 mm Porte-outil : HSK-A63 Refroidissement : Broches motorisées refroidies par liquide Lubrification : Lubrification minimale (huile) Force de serrage mécanique : > 18 kN Limite d'usure : 16 kN Plage de vitesse : 1 – 17 500 tr/min Temps d'accélération : 0,7 s Puissance : 2 × 35 kW à 4 200 tr/min (cycle de service de 40 %) Puissance nominale : 2 × 26 kW à 4 200 tr/min Couple : 2 × 80 Nm (cycle de service de 40 %) / 2 × 60 Nm (couple nominal) Plage d'usinage Distance entre broches : 800 mm Courses : - Axe X : 800 mm - Axe Y : 900 mm (1 200 mm en option) - Axe Z : 650 mm Différence entre les axes Z couplés : < 1,0 mm Différence entre les axes X couplés : < 1,0 mm Serrage des pièces / Système de table Double chariot pivotant (axe Q) avec deux tables rotatives à entraînement direct NC (axes A/U) Temps de pivotement 0-180° : 5,0 s Charge asymétrique max. : 1 600 Nm Table rotative Ø 800 mm, répétabilité : < 0,008 mm Poids max. de la pièce : 800 kg Couple de pointe : 1 900 Nm Couple nominal : 1 300 Nm Nm Vitesse max. de la table : 40 min⁻¹ Temps de changement d'outil : Copeau à copeau à n < 10 000 min⁻¹ : > 3,0 s Copeau à copeau à n < 17 500 min⁻¹ : > 3,15 s Données d'exploitation : -> Heures de fonctionnement de la broche env. 10 993 -> Heures de fonctionnement env. 22 851 La machine/l'équipement n'inclut aucun outil/dispositif de fixation ou préhenseur (robot) lié au produit.Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770003Centre d'usinage CNC bi-broche horizontal 4 axes SW BAW06-22 | 2020
CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axes (X1 and X2) Rapid traverse: 100 m/min Max. Acceleration: 12 m/s² Kv Factor: 7 Peak Force: 2 × 10,000 N Continuous Force: 2 × 5,000 N Positioning Accuracy: Tp = 0.008 mm Y-Axis Fast Traverse: 100 m/min Max. Acceleration: 10 m/s² Kv Factor: 7 Peak Force: 10,000 N Continuous Force: 5,000 N Positioning Accuracy: Tp = 0.008 mm Z-Axis (Z1 and Z2) Fast Traverse: 100 m/min Max. Acceleration: 20 m/s² Kv Factor: 7 Peak Force: 2 × 5,000 N Continuous Force: 2 × 2,500 N Positioning Accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Drive Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travel paths: - X-axis: 600 mm - Y-axis: 600 mm (optional 875 mm) - Z-axis: 500 mm Workpiece clamping / Table system Swivelable fixture with two separate swivel tables for mounting clamping bridges (4-Axis) Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 9,354 -> Operating hours approx. 21,130 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770004Centre d'usinage CNC bi-broche horizontal 4 axes SW BAW06-22 | 2020
CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axes (X1 and X2) Rapid traverse: 100 m/min Max. Acceleration: 12 m/s² Kv Factor: 7 Peak Force: 2 × 10,000 N Continuous Force: 2 × 5,000 N Positioning Accuracy: Tp = 0.008 mm Y-Axis Fast Traverse: 100 m/min Max. Acceleration: 10 m/s² Kv Factor: 7 Peak Force: 10,000 N Continuous Force: 5,000 N Positioning Accuracy: Tp = 0.008 mm Z-Axis (Z1 and Z2) Fast Traverse: 100 m/min Max. Acceleration: 20 m/s² Kv Factor: 7 Peak Force: 2 × 5,000 N Continuous Force: 2 × 2,500 N Positioning Accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Drive Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travel paths: - X-axis: 600 mm - Y-axis: 600 mm (optional 875 mm) - Z-axis: 500 mm Workpiece clamping / Table system Swivelable fixture with two separate swivel tables for mounting clamping bridges (4-Axis) Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 11,750 -> Operating hours approx. 23,400 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770005Centre d'usinage CNC bi-broche horizontal 4 axes SW BAW06-22 | 2020
CNC Control SIEMENS 840D SL Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 200 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axes (X1 and X2) Rapid traverse: 100 m/min Max. Acceleration: 12 m/s² Kv Factor: 7 Peak Force: 2 × 10,000 N Continuous Force: 2 × 5,000 N Positioning Accuracy: Tp = 0.008 mm Y-Axis Fast Traverse: 100 m/min Max. Acceleration: 10 m/s² Kv Factor: 7 Peak Force: 10,000 N Continuous Force: 5,000 N Positioning Accuracy: Tp = 0.008 mm Z-Axis (Z1 and Z2) Fast Traverse: 100 m/min Max. Acceleration: 20 m/s² Kv Factor: 7 Peak Force: 2 × 5,000 N Continuous Force: 2 × 2,500 N Positioning Accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Drive Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travel paths: - X-axis: 600 mm - Y-axis: 600 mm (optional 875 mm) - Z-axis: 500 mm Workpiece clamping / Table system Swivelable fixture with two separate swivel tables for mounting clamping bridges (4-Axis) Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Rotary table Ø 800 mm, repeatability: < 0.008 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm Positioning accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 11,388 -> Operating hours approx. 21,402 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770007Centre d'usinage CNC bi-broche horizontal 4/5 axes SW BAW06-22 | 2015
CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Technology Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travels: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece clamping / Table system OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carriage (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the swivel carriage Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm/s² Partial accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 18,267 -> Operating hours approx. 44,240 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770008Centre d'usinage CNC bi-broche horizontal 4/5 axes SW BAW06-22 | 2014
CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Technology Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travels: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece clamping / Table system OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carriage (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the swivel carriage Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm/s² Partial accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 21.000 -> Operating hours approx. 47.000 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770009Centre d'usinage CNC bi-broche horizontal 4/5 axes SW BAW06-22 | 2014
CNC Control SIEMENS 840D Electrical Connection Connection voltage: 3 × 400 V / 50 Hz (grounded) Network type: TN-S or TN-C network Total connected load: 133 kVA Power factor: 0.6 Fuse protection: 190 A gG (5 s) Weight Machine operating weight: 20,000 kg Transport weight: 16,000 kg Tool magazine Tool change: Pick-up system Tool management: Fixed-coded tool positions Capacity: 84 tools (2 × 42) Maximum total tool weight: 350 kg Feed drives Drive type: Three-phase synchronous motors Line measuring system X/Y/Z: Direct, absolute X-axis Rapid traverse: 100 m/min Max. acceleration: 12 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Y-axis Rapid traverse: 100 m/min Max. acceleration: 10 m/s² Kv factor: 7 Peak force: 10,000 N Continuous force: 5,000 N Positioning accuracy: Tp = 0.008 mm Z-axes (Z1, Z2) Rapid traverse: 100 m/min Max. acceleration: 20 m/s² Kv factor: 7 Peak force: 2 × 5,000 N Continuous force: 2 × 2,500 N Positioning accuracy: Tp = 0.008 mm Main Spindles Spindle Arrangement: Horizontal, Twin Spindles side by side Motor Spindles, Liquid-cooled, Synchronous Technology Spindle Diameter: 40 mm Tool Holder: HSK-A63 Lubrication: Minimum Quantity Lubrication (Oil) Mechanical Clamping Force: > 18 kN Wear Limit: 16 kN Speed Range: 1 – 17,500 rpm Acceleration Time: 0.7 s Power: 2 × 35 kW at 4,200 rpm (40% duty cycle) Rated Power: 2 × 26 kW at 4,200 rpm Torque: 2 × 80 Nm (40% duty cycle) / 2 × 60 Nm (Rated Torque) Machining Range Spindle Spacing: 600 mm Travels: X-axis: 600 mm Y-axis: 600 mm (optional 875 mm) Z-axis: 500 mm Workpiece clamping / Table system OP1: Swivel support with two separate swivel tables for clamping bridges OP2: Double swivel carriage (Q-axis) with two direct-drive NC rotary tables (A-/U-axes) Double-sided gearing on the swivel carriage Swivel time 0–180°: 3.5 s Max. asymmetric load: 800 Nm Repeatability Ø 800 mm: < 0.008 mm Max. clamping device and workpiece diameter: Ø 675 mm × 1,430 mm Max. workpiece weight: 600 kg Peak torque: 981 Nm Rated torque: 698 Nm Max. table speed: 50 min⁻¹ Angular acceleration: 2.5 – 10 rpm/s² Partial accuracy: ±5″ Tangential torque: 4,500 Nm Max. load torque: 500 Nm Tool change times Chip-to-chip at n < 10,000 min⁻¹: > 2.75 s Chip-to-chip at n < 17,500 min⁻¹: > 3.15 s Operating Data: -> Spindle hours approx. 22.000 -> Operating hours approx. 48.000 Machine/Asset does not include any Product related Tool/Fixture or Gripper (Robot)Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
LISTE 2770014Machine à mesurer tridimensionnelle (3 axes) Mitutoyo Crysta-Apex C9166 | 2005
avec PC, logiciel et dongle pour inclure diverses sondes de mesure Important : le service de manutention/démontage comprend le verrouillage professionnel pour le transport avec des pièces d'origine Mitutoyo par des techniciens Mitutoyo, la sécurisation des pièces sensibles, par exemple avec du film à bulles, et le chargement sur le camion.Fin : 27 février 2026 à 17 h 00 UTCVoir l'article
Informations essentielles
Informations générales
- Dates de la vente aux enchères
- Starts: 19 January 2026 at 08:00 UTCEnds: 27 February 2026 at 17:00 UTC
- Adresse du site
- HAL Automotive Plauen
Schenkendorfstraße 14
Plauen
08525
Germany - Jours de consultation
- Sur rendez-vous uniquementInspection sur rendez-vous uniquement - Veuillez contacter Inquiry@Maynards.com pour convenir d'un rendez-vous d'inspection.
Frais et paiement
- Monnaie
- EUR
- Prime à l'acheteur
- 18% ou comme spécifié sur les articles individuels
- Paiement
Informations générales sur les paiements
- Une seule facture sera émise par enchérisseur pour tous les lots gagnés lors d'une même vente aux enchères.
- The invoice will be in PDF format and will be emailed to successful bidders within 48 hours after the last lot in the auction has closed. Alternatively, a link will be emailed from where the invoice can be downloaded.
- Le paiement est dû immédiatement à la réception de la facture, sauf indication contraire sur la facture.
- Tous les paiements doivent être effectués dans la devise indiquée sur la facture émise.
- Le seul mode de paiement accepté est le virement bancaire.
- Nous n'acceptons pas les paiements par chèque, carte de débit ou carte de crédit.
- Veuillez indiquer le numéro de la facture sur le virement bancaire.
- For all bidders with residence outside of the country from where the assets are being sold, Maynards Europe will collect 19% of the invoice total as a deposit. This deposit will be refunded in full after Maynards Europe have received proof of export.
- Il arrive fréquemment que Maynards Europe n'émette dans un premier temps qu'une "facture proforma". Après réception du paiement intégral, de l'enlèvement des articles et de la réception des documents d'exportation (le cas échéant), la facture définitive sera émise.
Biens
- Journées de soldes
- 28 February 2026 at 07:00 UTC - 31 March 2026 at 16:00 UTCPlus d'informations dans les informations de vente
- Informations générales sur la collection
In Verbindung mit den allgemeinen Geschäftsbedingungen gilt Folgendes:
In conjunction with the general terms and conditions, the following apply:
Projektbezogene Geschäftsbedingungen
(English Version below)
1. Verkaufsbedingungen
• Alle Verkaufsgegenstände werden EXW (Incoterms 2020) „wie besichtigt und am Standort vorgefunden“ verkauft.
• Die Demontage, Handhabung und Verladung der Verkaufsgegenstände kann optional über einen Dienstleister angeboten werden. Sie ist nicht verpflichtend Bestandteil des Kaufvertrages.
• Sofern der Käufer die Demontage, Handhabung und Verladung in Anspruch nehmen möchte, erfolgt diese durch einen von Maynards vorab ausgewählten Drittanbieter gegen eine Pauschalgebühr je Los.
• Der Käufer ist berechtigt, die Demontage, Handhabung und Verladung eigenständig oder durch einen von ihm beauftragten Dritten durchführen zu lassen, sofern sämtliche gesetzlichen, sicherheitstechnischen und standortbezogenen Vorgaben und die zeitliche Frist eingehalten werden und eine vorherige schriftliche Abstimmung mit Maynards erfolgt.
• Nimmt der Käufer die von Maynards angebotenen Demontageleistungen in Anspruch, erhebt Maynards im Namen und im Auftrag des Demontagedienstleisters eine verbindliche Pauschalgebühr für die standardmäßige Demontage, Handhabung und Verladung (ausschließlich auf LKW, nicht in Container). Diese Gebühr wird für jedes Los gesondert ausgewiesen.
• Sämtliche Angelegenheiten im Zusammenhang mit der optional beauftragten Demontage, Handhabung, Verladung und Abholung sind unmittelbar zwischen Käufer und dem Demontagedienstleister abzustimmen.
• Die Abholung erfolgt grundsätzlich per LKW (Standard-, Schwerlast- oder Übermaßtransport, sofern erforderlich). Abweichende Transportmittel bedürfen der vorherigen schriftlichen Zustimmung von Maynards bzw. des Demontagedienstleisters.
• Die angebotene Pauschalgebühr umfasst – sofern beauftragt – die Demontage, Handhabung und Verladung der Gegenstände in transportfähige Einheiten auf einen geeigneten LKW (nicht Container oder sonstige Transportarten).
• Bauteile werden – sofern erforderlich und beauftragt – mittels geeigneter Hebezeuge ausgebaut, transportgerecht verpackt, innerbetrieblich bewegt und auf bereitstehende LKW verladen.
• Spezial- oder seefeste Verpackungen sind ausdrücklich nicht Bestandteil der angebotenen Demontagepauschale.
• Der Käufer bzw. dessen Spediteur stellt – unabhängig davon, wer die Demontage durchführt – sämtliche erforderlichen Materialien zur Transportsicherung (z. B. Antirutschmatten, Ketten, Zurrgurte, Planen) bereit oder beschafft diese rechtzeitig.
• Sofern spezielle Transport- oder Sicherungsvorrichtungen des OEM erforderlich sind, hat der Käufer diese eigenverantwortlich beim Hersteller anzufordern und bereitzustellen. Dies gilt nicht für Maschinen des Herstellers „Schwäbische Werkzeugmaschinen“ und Starrag Heckert“. Für diese Maschinen sind die Transportsicherungen bereits vorhanden und eingebaut.
• Kosten für solche Vorrichtungen sind nicht in der optionalen Demontagepauschale enthalten und gehen ausschließlich zu Lasten des Käufers.
Weitere Leistungen wie Verpackung und Versand können – sofern gewünscht – direkt bei Maynards oder dem Demontagedienstleister angefragt werden.
2. Abholung und Zeitplan
• Sofern der Käufer die Demontage durch den von Maynards benannten Dienstleister beauftragt, informiert dieser den Käufer über die Abholbereitschaft der Lose und benennt ein Abholzeitfenster.
• Spätester Abholtermin: 20. Februar 2026, vorbehaltlich der Terminplanung und Koordination. Maynards behält sich vor, Abholzeiträume organisatorisch anzupassen.
• Die Abholung erfolgt ausschließlich nach vorheriger Terminvereinbarung und innerhalb des jeweils vereinbarten Zeitraums.
Ergänzend gelten die Allgemeinen Geschäftsbedingungen der Maynards Europe GmbH.
3. Export- und Genehmigungspflichten
• Je nach Bestimmungsland können Exportgenehmigungen erforderlich sein.
• Der Käufer ist verpflichtet, erforderliche Ausfuhrgenehmigungen und behördliche Erlaubnisse rechtzeitig einzuholen.
• Bis zur Erteilung erforderlicher Ausfuhrgenehmigungen übernimmt der Käufer Lagerung und Risiko.
• Sämtliche daraus entstehenden Kosten und Risiken trägt ausschließlich der Käufer.
• Der Käufer verpflichtet sich, sämtliche Zollformalitäten ordnungsgemäß zu erfüllen und alle von Maynards angeforderten Informationen oder schriftlichen Bestätigungen fristgerecht zur Verfügung zu stellen.
1. Terms of Sale
• All items offered for sale are sold EXW (Incoterms® 2020), “as inspected and as found at the location.”
• Dismantling, handling, and loading of the sold items may be offered as an optional service via a service provider. Such services do not constitute a mandatory part of the purchase contract.
• Should the Buyer wish to make use of dismantling, handling, and loading services, these shall be performed by a third-party service provider preselected by Maynards, against a flat-rate fee per lot.
• The Buyer is entitled to carry out dismantling, handling, and loading independently or through a third party appointed by the Buyer, provided that all statutory, safety-related, and site-specific requirements, as well as the applicable time limits, are complied with and prior written coordination with Maynards has taken place.
• If the Buyer makes use of the dismantling services offered by Maynards, Maynards shall charge, in the name and on behalf of the dismantling service provider, a binding flat-rate fee for standard dismantling, handling, and loading (loading onto trucks only; container loading expressly excluded). This fee shall be shown separately for each lot.
• All matters relating to optionally commissioned dismantling, handling, loading, and collection shall be coordinated directly between the Buyer and the dismantling service provider.
• Collection shall generally be carried out by truck (standard, heavy-duty, or oversized transport, as required). Any deviation from this method of transport shall require the prior written consent of Maynards and/or the dismantling service provider.
• The offered flat-rate fee includes—if commissioned—the dismantling, handling, and loading of the items into transportable units onto a suitable truck (excluding containers or other modes of transport).
• Components shall—if required and commissioned—be removed using appropriate lifting equipment, packed in a transport-suitable manner, moved internally on site, and loaded onto trucks provided for this purpose.
• Special packaging or seaworthy packaging is expressly not included in the offered dismantling flat-rate fee.
• The Buyer and/or the Buyer’s freight forwarder shall provide or procure in due time—regardless of who performs the dismantling—all materials required for load securing (e.g. anti-slip mats, chains, lashing straps, tarpaulins).
• If special transport or securing devices prescribed by the OEM are required, the Buyer shall be solely responsible for requesting and providing such devices from the manufacturer.
This shall not apply to machines manufactured by Schwäbische Werkzeugmaschinen and Starrag Heckert. For these machines, the transport securing devices are already available and installed.• Costs for such transport or securing devices are not included in the optional dismantling flat-rate fee and shall be borne exclusively by the Buyer.
Additional services such as packaging and shipping may, if desired, be requested directly from Maynards or the dismantling service provider.
2. Collection and Schedule
• If the Buyer commissions dismantling through the service provider designated by Maynards, the service provider shall inform the Buyer once the lots are ready for collection and shall specify a collection time window.
• Latest collection date: 20 February 2026, subject to scheduling and coordination. Maynards reserves the right to adjust collection periods for organizational reasons.
• Collection shall take place exclusively by prior appointment and within the agreed time window.
3. Export & Compliance Obligations
• Export of assets may require authorization depending on destination.
• The buyer must obtain any necessary export licenses or governmental approvals.
• The buyer assumes responsibility, risk, and cost for interim storage pending export clearance.
• All resulting costs and risks are borne exclusively by the buyer.
• The buyer must fulfil all customs formalities and provide any requested information or confirmations to Maynards to enable export.
- Contacts commerciaux
- Informations sur les ventes aux enchèresAdrian Matuszczak
Maximilianstr. 4B
Starnberg
82319
Allemagne
adrian@maynards.com
+49 (0) 8151 1878 430Service clientèle Maynards Europe GmbH
Gewerbealle 3
Poecking
82343
Allemagne
inquiry@maynards.com
+ 49 (0) 8151 1878 400